213228-2610

10 9 CIRCUIT N 7 8 CIRCUIT (N-1) 4 3 2 1 CIRCUIT 1 CIRCUIT 2 NOTE 1. 端子テール部およびネイルの平坦度: 0.1mm MAX TAIL AND NAIL COPLANARITY TO BE 0.1mm MAX 2. (極数/2) = 偶数 に適用 APPLY FOR (CIRCUIT SIZE/2) = EVEN 3 関連製品・書類はSHEET 5を参照ください 　 REFER TO SHEET 5 ABOUT RELATED PRODUCTS AND DOCUMENTS (1.95) F 5 6 TRADE MARK A ±0.25 (B) E F CAV & MOLD NO. 1 E (9.20) 4 (0.05) NAIL AND TAIL (1.50) D (0.30) CONTACT PITCH (3.65) NAIL SOLDERING AREA NAIL SOLDERING AREA 8.75 D 3 TAIL 2 (0.80) C (1.65) CONNECTOR CENTER TAIL SOLDERING AREA TAIL PITCH CENTER C 4　オーダー番号(製品番号): (0.375) (0.25) TAIL PITCH TAIL 番号 NO. ① SHEET 6の製品一覧を参照のこと ORDER No. (PRODUCT No.)：REFER TO SHEET 6 FOR PRODUCT LIST. (0.75) 部品 PART 213228 ＊＊＊＊ 材質 MATERIAL ハウジング ポリアミド(PA)　UL94V-0 色：SEE CHART HOUSING POLYAMIDE(PA) UL94V-0 COLOR : SEE CHART B 銅合金 COPPER ALLOY ② ③ コンタクト部 ターミナル CONTACT AREA TERMINAL テール部 TAIL AREA 金めっき：製品一覧参照 GOLD PLATING：SEE PRODUCT LIST 無光沢錫めっき　： 1.0 micro-meter MIN MATTE TIN PLATING: 1.0 micro-meter MIN 下地めっき(全面) UNDER PLATING (WHOLE SURFACE) ニッケルめっき：2.0 micro-meters MIN NICKEL PLATING ：2.0 micro-meters MIN CIRCUIT 08～26 黄銅 BRASS A ④ ネイル NAIL 色　　 シリーズ番号 SERIES NO 極数 CIRCUIT SIZE GOLD No. THK[μm] COLOR 金めっき厚　　　　　　　　 GOLD PLATING THICKNESS DOCUMENT STATUS No. RELEASE DATE 9 2021/10/05 1 0.1 0 ナチュラル　NATURAL 3 0.38 1 黒　BLACK 7 0.76 DIMENSION UNITS SCALE mm NTS 6 B A 極数 CKT.NO. C B 5 CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 26 24 22 20 18 16 14 12 10 8 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 08:21:54 8 ±0.2 23.8 22.3 20.8 19.3 17.8 16.3 14.8 13.3 11.8 10.3 COLOR 無光沢錫めっき　： 1.0 micro-meter MIN MATTE TIN PLATING P1 ±0.25 18.0 16.5 15.0 13.5 12.0 10.5 9.0 7.5 6.0 4.5 C ニッケルめっき(下地)：1.0 micro-meter MIN NICKEL PLATING(UNDER PLATING) FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 22.0 20.5 19.0 17.5 16.0 14.5 13.0 11.5 10.0 8.5 4 CLIK-MATE 1.5 DUAL ROW SMT R/A TYPE GOLD PLATING EC NO: 680153 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2021/10/05 2021/10/05 2021/10/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213228 3 2132280000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 F SHEET NUMBER 1 OF 6 1 A 10 9 7 8 6 5 4 3 2 1 F F 2.70 ±0.10 B+0.75 ±0.05 2.23 ±0.05 0.55 ±0.05 (0.375) (0.68) 0.75 ±0.05 (1.43) 1.54 (0.24) (PITCH) E 0.24 0.65 CIRCUIT 1 6.54 D CIRCUIT N 4.65 ±0.10 6.15 ±0.10 2.95 E 1.48 ±0.05 D CONNECTOR OUTLINE (1.20) 1.20 ±0.10 1.95 CONNECTOR CENTER 2.48 PATTERN CENTER パターン非推奨エリア 基板パターンレイアウト(参考) C RECCOMENDED PCB PATTERN LAYOUT (REF) C パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECCOMENDED ON THE HATCHED AREA. PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHED AREA. (参考：メタルマスク厚さ　0.10mm, マスク開口率100%) (REFERENCE: METAL MASK THICKNESS 0.10MM, APERTURE RATIO 100%) B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2021/10/05 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:21:54 8 ANGULAR TOL 7 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT R/A TYPE GOLD PLATING EC NO: 680153 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2021/10/05 2021/10/05 2021/10/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213228 3 2132280000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 F SHEET NUMBER 2 OF 6 1 A 10 9 7 8 5 6 4 3 2 1 VACUUM AREA (HATCHED) E MIN E D E MIN E MIN F E MIN F D D E D D D 8-10極 12-18極 20-28極 30-34極 8-10 CKT 12-18 CKT 20-28 CKT 30-34 CKT 極数別ハウジング形状および吸着エリア HOUSING SHAPE AND VACUUM AREA AT EACH CKTS C 24 22 4.2 20 3.2 (9.2) 5.6 18 16 2.5 14 12 2.3 B 嵌合相手：503149シリーズ (0.80) MATE WITH: 503149 SERIES A P1 RELEASE DATE 9 2021/10/05 DIMENSION UNITS SCALE mm NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:21:54 8 7 E D B 10 8 CKT NO CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) MATED CONNECTORS DOCUMENT STATUS 3.6 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 嵌合図 FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 2.75 C 26 5.2 (11.20) 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT R/A TYPE GOLD PLATING EC NO: 680153 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2021/10/05 2021/10/05 2021/10/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213228 3 2132280000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 F SHEET NUMBER 3 OF 6 1 A 9 7 8 引き出し方向 5 6 4 3 引き出し方向 6 REEL PULL OUT DIRECTION PULL OUT DIRECTION F 2 1.50 +0.10 0 (1.70) 10 1 44mm幅テープ TAPE WIDTH : 44mm (R 0.75) F 32mm幅テープ TAPE WIDTH : 32mm ⌀380±2 24mm幅テープ TAPE WIDTH : 24mm 5 トップテープ E コネクタ G ±0.10 F TOP TAPE E (H) DETAIL P J ±1.00 EMBOSSED TAPE D NOTE (⌀10) ⌀ 1.50 +0.10 0 4±0.1 （累積ピッチ：40±0.2） D (12 5．梱包数量　：　550個／リール 　　NUMBER OF CONNECTORS : 550 PIECES/REEL 6．リードテープ長さ 　　LEAD TAPE LENGTH (16) 1.75 ±0.10 4 エンボステープ K ±1.00 CENTER OF CONNECTOR CONNECTOR (22) 0 °) トップテープ接着部（空エンボス） 20 PIECES MIN. TOP TAPE BONDED PART(EMPTY) 26 C 部品挿入部 400 MIN. COMPONENT SUPPLIER 末端部（空部） 100MIN. A ⑤ ⑥ DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 9 2021/10/05 33.4 14.2 32±0.3 28.4 14 29.4 25.4 11.5 - K J H G 10 +0.3 24 -0.1 B 8 エンボステープ幅F WIDTH OF TAPE CKT NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ポリエチレン、ポリエチレンテレフタレート POLYETHYLENE (PE), POLYETHYLENE TELEPHTHALATE (PET) RELEASE DATE 18 12 ポリスチレン　(リサイクル材を含む) POLYSTYLENE　(CONTAINED RECYCLED MATERIAL) P1 20 37.4 ポリスチレン(PS) エンボステープ EMBOSSED TAPE POLYSTYLENE リール REEL 22 16 材質 MATERIAL トップテープ TOP TAPE 44±0.3 40.4 DETAIL P TOP TAPE PEELING OFF FORCE IS DIFINED BY JIS C0806-3. 8 . 本製品は乾燥剤入り、ハイバリア梱包である。 　 THIS PRODUCT IS DELIVERED IN HIGH BARRIER PACKAGE WITH DESICCANT. ④ 20.2 TAIL PART (EMPTY) 7．トップテープの剥離強度はJIS C0806-3 準拠 番号 部品 No. PART 45.4 49.4 (0. 2) ⌀ 21 PULL OUT DIRECTION B C 24 引き出し方向 7 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:21:54 8 ANGULAR TOL 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT R/A TYPE GOLD PLATING EC NO: 680153 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2021/10/05 2021/10/05 2021/10/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213228 3 2132280000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 F SHEET NUMBER 4 OF 6 1 A 10 9 8 7 5 6 4 3 2 1 F F 3 適用製品及び各種仕様書 APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 梱包仕様書 PACKAGING SPECIFICATION E 適用嵌合相手 MATE WITH PART NUMBER DOCUMENT NUMBER 213228 **** 2132289200-SPK 503149 **** 製品仕様書 PRODUCT SPECIFICATION D TERMINAL (GOLD PLATING) PLATING THK #24-28 HOUSING 製品番号 PRODUCT NUMBER E #28-30 0.1 micro-meters 213028 1*00 213029 1*00 0.38 micro-meters 213028 3*00 213029 3*00 0.76 micro-meters 213028 7*00 213029 7*00 5031490002-PS/PS/000 アプリケーション仕様書 APPLICATION SPECIFICATION D AS-503149-001 C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2021/10/05 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:21:54 8 ANGULAR TOL 7 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT R/A TYPE GOLD PLATING EC NO: 680153 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2021/10/05 2021/10/05 2021/10/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213228 3 2132280000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 F SHEET NUMBER 5 OF 6 1 A 10 9 7 8 6 5 4 3 2 1 F F 4 製品一覧 PRODUCTS LIST E D 黒　BLACK ナチュラル NATURAL 213228 2611 213228 2411 213228 2211 213228 2011 213228 1811 213228 1611 213228 1411 213228 1211 213228 1011 213228 0811 213228 2610 213228 2410 213228 2210 213228 2010 213228 1810 213228 1610 213228 1410 213228 1210 213228 1010 213228 0810 オーダー番号 ORDER No C 黒　BLACK ナチュラル NATURAL 213228 2671 213228 2471 213228 2271 213228 2071 213228 1871 213228 1671 213228 1471 213228 1271 213228 1071 213228 0871 213228 2670 213228 2470 213228 2270 213228 2070 213228 1870 213228 1670 213228 1470 213228 1270 213228 1070 213228 0870 オーダー番号 ORDER No B HOUSING COLOR 26 24 22 20 18 16 14 12 10 213228 **1* (GOLD PLATING THICKNESS: 0.1 micro-meters MIN) 8 極数 CKT 黒　BLACK ナチュラル NATURAL 213228 2631 213228 2431 213228 2231 213228 2031 213228 1831 213228 1631 213228 1431 213228 1231 213228 1031 213228 0831 213228 2630 213228 2430 213228 2230 213228 2030 213228 1830 213228 1630 213228 1430 213228 1230 213228 1030 213228 0830 MODEL NO HOUSING COLOR 26 24 22 20 18 16 14 12 10 E 213228 **3* (GOLD PLATING THICKNESS: 0.38 micro-meters MIN) 8 極数 CKT オーダー番号 ORDER No D MODEL NO HOUSING COLOR 26 24 22 20 18 16 14 12 10 C 213228 **7* (GOLD PLATING THICKNESS: 0.76 micro-meters MIN) 8 極数 CKT MODEL NO B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2021/10/05 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:21:54 8 ANGULAR TOL 7 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT R/A TYPE GOLD PLATING EC NO: 680153 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2021/10/05 2021/10/05 2021/10/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213228 3 2132280000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 F SHEET NUMBER 6 OF 6 1 A