436450900

20 19 18 17 16 15 14 13 12 11 10 9 SEE NOTE 11 M .200 5.09 K .152 3.86 .180 4.57 CIRCUIT #1 IDENTIFIER .080 2.03 CIRCUIT #1 .076 1.93 A .118 3.00 J .118 TYP 3.00 .075 1.92 H 5 4 3 2 NUMBER OF CIRCUIT DIM. "A" 43645-0200 02 SEE DETAIL .118/(3.00) 43645-0300 03 .388/(9.85) .236/(6.00) 43645-0400 04 .506/(12.85) .354/(9.00) 43645-0500 05 .624/(15.85) .472/(12.00) 43645-0600 06 .742/(18.85) .591/(15.00) 43645-0700 07 .860/(21.85) .709/(18.00) 43645-0800 08 .978/(24.85) .827/(21.00) 43645-0900 09 1.096/(27.85) .945/(24.00) 43645-1000 10 1.215/(30.85) 1.063/(27.00) 43645-1100 11 1.333/(33.85) 1.181/(30.00) 43645-1200 12 1.451/(36.85) 1.299/(33.00) ITEM NUMBER 43645 .455 REF 11.56 .326 8.28 43645 .551 14.00 6 CIRCUIT #1 IDENTIFIER .209 5.30 L 7 8 DIM. "B" 1 M MATERIAL "B" L "A" K J .076 1.93 A FIRST CIRCUIT "B" IDENTIFIER RIB "A" (ALL CIRCUIT SIZES) H (2 CIRCUIT HOUSING) (3-12 CIRCUIT HOUSING) G G RECEPTACLE #43645-**** .691 (17.56) F E .030 REF 0.76 TERMINAL INSERTION DEPTH HEADER #43650-**** MATED MICRO-FIT CONNECTOR C 9. 10. B 11. 12. 13. TERMINAL LOCKING TABS MUST BE FULLY SEATED TO HOUSING BEFORE MATING WITH OTHER HALF OF THE CONNECTOR SYSTEM. B SECTION "B"-"B" D SECTION "A"-"A" "B" - UNFILLED NYLON, RATED U.L. 94V-0, HALOGEN-FREE, COLOR IS BLACK. FINISH : N/A PRODUCT SPECIFICATION : PS-43650 PACKAGING SPECIFICATION: PK-43645-001 THIS RECEPTACLE ACCEPTS MOLEX MICRO FIT FEMALE CRIMP TERMINALS SERIES 43030 OR 46235, SEE SECTION "A"-"A" FOR TERMINAL ORIENTATION IN HOUSING. FOR OVERMOLDING PARAMETERS SEE APPLICATION SPECIFICATION 430250000-AS. THIS RECEPTACLE MATES WITH MOLEX PCB HEADER 43650 SERIES AND MOLEX PLUG 43640 SERIES (WIRE TO WIRE APPLICATIONS). SOME HOUSINGS MAY HAVE A SMALL GATE BLEMISH NEAR THE GATE LOCATION THAT DOES NOT AFFECT FUNCTIONALITY. MOLEX RECOMMENDS THE USE OF MICRO-FIT TEST PLUG, SERIES 44242-**** WHENEVER CONTINUITY TESTING IS PERFORMED. TEST PLUGS MUST NOT BE USED TO MAKE OR BREAK UNDER LOAD. MOLEX DOES NOT RECOMMEND USING STANDARD MATING COMPONENTS FOR HARNESS TESTING PURPOSES. THIS RIB IS DISCONTINUOUS ON CIRCUIT SIZES 7 THROUGH 12 PART CONFORMS TO CLASS 'B' REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY DEPENDING ON PART NUMBER AND/OR TOOL. SHOWN WITH TERMINAL INSTALLED SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE IN/MM 4:1 = 0 SEE NOTE 11 = 0 = 0 MM DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: D DATE: 2018/01/18 20 19 P1 RELEASE DATE 18 2018/06/01 17 THIS DRAWING REPLACES DRAWING SDA-43645-++++. 21:26:13 16 15 14 13 12 11 10 9 C ± 3 PLACES ± ± 8 0.01 2 PLACES ± 0.25 ± 0.014 ± 0.35 ± 1 PLACE = 0 0 PLACES ± = 0 INCH 4 PLACES ± = 0 = 0 CURRENT REV DESC: INITIAL RELEASE GENERAL TOLERANCES (UNLESS SPECIFIED) ± ANGULAR TOL A E TERMINAL 43030-**** "A" - UNFILLED POLYESTER, RATED U.L. 94V-0, COLOR IS BLACK. 2. 3. 4. 5. 6. 7. 8. TERMINAL STOPS B NOTES: 1. HOUSING MATERIAL: D F ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 168740 DRWN: AZAHIROVIC CHK'D: SSOUSEK APPR: FSMITH INITIAL REVISION: DRWN: A.F.G APPR: R.J.F THIRD ANGLE PROJECTION 6 2018/03/13 2018/06/01 2018/06/01 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1995/11/15 1995/11/15 DRAWING SERIES D-SIZE 43645 5 MICRO-FIT (3.0) RECEPTACLE, SINGLE ROW 2 THRU 12 CIRCUIT 436450000-SD MATERIAL NUMBER GENERAL MARKET 3 A SHEET NUMBER CUSTOMER SEE CHART 4 PSD 000 2 1 OF 1 1 A