5034803200

10 9 7 8 5 6 4 3 0.5(N-1) ±0.05 0.5 ±0.05 0.7 ±0.05 0.79 ±0.05 A �B� 0.25 Y �3.6� F E �0.25� E 0.3 ±0.05 1.0 ±0.05 (PITCH) CONNECTOR POSITION (PITCH) 3.5 ±0.05 0.5 �1.65� CIRCUIT NO.1 0.15 1 0.79 ±0.05 �0.5N+0.7� PICK-UP AREA(REF.) 0.3 ±0.05 �0.15� F 2 N:CIRCUITS P.W.BOARD PATTERN DIMENSION(REF.) (MOUNT AREA) N:CIRCUITS METAL MASK THICKNESS : 0.1mm OPENING AREA : TERM.(0.7X0.3) NAIL(1.0X0.3) Y (INSERTION DEPTH OF FPC) D �1.0� D �0.25� �1.0� �0.8� SECTION Y-Y 0.15 C 20.5 19.5 18.5 17.5 16.5 15.5 14.5 13.5 12.5 11.5 10.5 9.5 9.0 8.5 7.5 6.5 5.5 4.5 3.5 3.0 2.5 �1.87� (CONTACT POSITION) �1.58� ACTUATOR OPEN CONDITION �C� �0.5� �4� ACTUATOR CLOSED CONDITION D = A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2021/09/02 0 40 38 36 34 32 30 28 26 24 22 20 18 17 16 14 12 10 8 6 5 4 21.7 20.7 19.7 18.7 17.7 16.7 15.7 14.7 13.7 12.7 11.7 10.7 10.2 9.7 8.7 7.7 6.7 5.7 4.7 4.2 3.7 503480-4000 503480-3800 503480-3600 503480-3400 503480-3200 503480-3000 503480-2800 503480-2600 503480-2400 503480-2200 503480-2000 503480-1800 503480-1700 503480-1600 503480-1400 503480-1200 503480-1000 503480-0800 503480-0600 503480-0500 503480-0400 EMBOSSED PACKAGE C B A ORDER NO. CONNECTOR SERIES No. 503480-**09 D C B CIRCUIT = 0 = 0 mm 10:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 1.0 ° 4 PLACES ± 0.2 DIVISIONAL 3 PLACES SYMBOLS ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:09:44 8 19.5 18.5 17.5 16.5 15.5 14.5 13.5 12.5 11.5 10.5 9.5 8.5 8.0 7.5 6.5 5.5 4.5 3.5 2.5 2.0 1.5 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: �0.05� B 21.08 20.08 19.08 18.08 17.08 16.08 15.08 14.08 13.08 12.08 11.08 10.08 9.58 9.08 8.08 7.08 6.08 5.08 4.08 3.58 3.08 7 6 5 4 0.5 FPC CONN. E/O BACKFLIP H=1.0MM ASSEMBLY EC NO: 676145 DRWN: ICYANG CHK'D: SHCHU APPR: SHCHU INITIAL REVISION: DRWN: THIRAYAMA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2021/07/21 2021/09/02 2021/09/02 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2009/12/11 2009/12/14 DRAWING SERIES A3-SIZE 503480 3 SD-503480-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 H2 SHEET NUMBER 1 OF 2 1 A 7 5 6 10 NOTES 0.5(N+1) ±0.05 0.5(N-1) ±0.05 0.5 ±0.1 0.5 ±0.05 HOUSING MATERIAL:LIQUID CRYSTAL POLYMER(LCP), GLASS FILLED, UL94V-0, NATURAL(WHITE) 0.5(N+1) ±0.05 0.5(N-1) ±0.05 F 0.5 ±0.08 0.5 ±0.05 0.3 ±0.03 (PITCH) 2-R 0.3 3MIN. 2MIN. CONTACT AREA : SEPARATED GOLD PLATING (0.1 MICROMETER MINIMUM) SOLDER TAIL AREA : SEPARATED GOLD PLATING UNDERPLATE : NICKEL OVERALL (1.0 MICROMETER MINIMUM) ACTUATOR MATERIAL：POLYAMIDE(PA), GLASS FILLED, UL94 HB, BLACK NAIL 1 0.5 ±0.08 0.35 ±0.03 TERMINAL MATERIAL:PHOSPOHR BRONZE E 2 10 0.5 ±0.1 1. PART COMPOSITION 3 5 MATERIAL:PHOSPOHR BRONZE (STIFFENER BOARD) F 4 3MIN. 8 2MIN. 9 (STIFFENER BOARD) 10 E SOLDER TAIL AREA : TIN OVERALL(1.0 MICROMETER MINIMUM) UNDERPLATE : NICKEL OVERALL(1.0 MICROMETER MINIMUM) 3. PLEASE OPERATE THE ACTUATOR AFTER INSERTING THE FPC INTO THE CONNECTOR. (THICKNESS：0.3±0.05) ：30 OR LESS CIRCUITS (THICKNESS：0.3±0.03) ：31 OR OVER CIRCUITS 4. ABOUT FPC RECOMMENDED STIFFENER MATERIAL: POLYIMIDE RECOMMENDED BASE FILM THICKNESS: 25 MICROMETER RECOMMENDED ADHESIVE: THERMOSETTING ADHESIVE NOTE: PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY. THERMOSETTING ADHESIVE BASE FILM: POLYIMIDE(25um) THERMOSETTING ADHESIVE R0.3 MUST NOT BE OVERLAPPED TO PATTERN OF FPC. COPPER FOIL (35um) THICKNESS 5 D REINFORCE BOARD: POLYIMIDE RECOMMENDED PUNCHER DIRECTION: FROM CONDUCTOR SIDE TO STIFFENER FILM SIDE. RECOMMENDED CONDUCTOR SPECIFICATION: THICKNESS OF SOFT COPPER FOIL: 35MICROMETER C N:CIRCUITS APPLICABLE FFC RECOMMENDED DIMENSION �0.3� D N:CIRCUITS APPLICABLE FPC RECOMMENDED DIMENSION 2． PLEASE DO NOT OPERATE THE ACTUATOR BEFORE MOUNTING. C 6. COPLANARITY : 0.1 MAXIMUM THERMOSETTING ADHESIVE 7. PLEASE RECOGNIZE A POSSIBILITY TO CHANGE THE SHAPE OF THE PART THAT DOES NOT OBSTRUCT A FUNCTION, BY CIRCUMSTANCES IN OUR PRODUCTION. COVER FILM: POLYIMIDE(25um) PLATING: GOLD(0.1umMIN.) NICKEL UNDER (1-5um) 8. THIS PRODUCT IS DELIVERED WITH THE ACTUATOR IN THE OPEN POSITION. 9. THIS PRODUCT IS DUAL-CONTACT (TOP- AND BOTTOM-CONTACTS) TYPE CONNECTOR. B 10 STRUCTURE OF FPC B PLEASE CONFIRM TO INSERT FPC IN ADVANCE WHEN FPC WIDTH IS OVER 0.5(N+1)+0.02. FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: = A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2021/09/02 = 0 = 0 mm 10:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 1.0 ° 4 PLACES ± 0.2 DIVISIONAL 3 PLACES SYMBOLS ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:09:44 8 0 7 6 5 4 0.5 FPC CONN. E/O BACKFLIP H=1.0MM ASSEMBLY EC NO: 676145 DRWN: ICYANG CHK'D: SHCHU APPR: SHCHU INITIAL REVISION: DRWN: THIRAYAMA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2021/07/21 2021/09/02 2021/09/02 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2009/12/11 2009/12/14 DRAWING SERIES A3-SIZE 503480 3 SD-503480-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 H2 SHEET NUMBER 2 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 REEL PULL OUT DIRECTION PULL OUT DIRECTION 4 ± 0.1 (E) C ± 0.3 D ± 0.1 CONNECTOR E TOP TAPE EMBOSSED TAPE 1.75 (2) POCKET CENTER (B) A ± 0.3 POCKET CENTER TAPE WIDTH(16/24) E TAPE WIDTH(32/44) F (F) F ( 2.06 ) CONNECTOR BOTTOM ( 2.74 ) 8 ± 0.1 DIRECTION OF CONNECTOR IN EMBOSSED TAPE 503480-4000 503480-3800 503480-3600 503480-3400 503480-3200 503480-3000 503480-2800 503480-2600 503480-2400 503480-2200 503480-2000 503480-1800 503480-1700 503480-1600 503480-1400 503480-1200 503480-1000 503480-0800 503480-0600 503480-0500 503480-0400 D 380 20.2 40.4 44 44 - NOTES 330 1. IN THE PACKAGE, PART NO.503480-**09 DETAILED DIMENSIONS. REFER TO SD-503480-001 - 14.2 28.4 32 32 380 2. NUMBER OF CONNECTORS : 3000PCS/REEL C 3. LEAD TAPE LENGTH - - - 11.5 24 24 - - - 7.5 16 16 TOP TAPE BONDED PART(EMPTY) TOP TAPE NON-BONDED PART 20 PCS.MIN. 15MIN. 330 PULL OUT DIRECTION B TOP TAPE LEADER PART COMPONENT SUPPLIER TAIL PART(EMPTY) 160MIN. 400 MIN. F 4. MATERIAL CARRIER TAPE : PET TOP TAPE : PET,OTHER REEL : PS (RECYCLE MATERIAL CONTAINED) = E2 DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 10 P1 RELEASE DATE 9 2021/09/02 03:09:46 8 7 D C B E1 E1 E1 E1 E1 40 38 36 34 32 30 28 26 24 22 20 18 17 16 14 12 10 8 6 5 4 D C B A TAPE WIDTH ORDER NO. CIRCUIT FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: 5. COVER TAPE PEEL FORCE IS DEFINED BY IEC60286-3. A E E1 6 10 UNDER : ±0.20 10 OVER 30 UNDER : ±0.25 30 OVER : ±0.30 5 0 = 0 = 0 mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC CONN. E/O EMBOSSED TAPE PACKAGE EC NO: 676145 DRWN: ICYANG CHK'D: SHCHU APPR: SHCHU INITIAL REVISION: DRWN: THIRAYAMA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2021/07/21 2021/09/02 2021/09/02 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2009/12/11 2009/12/14 DRAWING SERIES A3-SIZE 503480 3 SD-503480-002 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 E2 SHEET NUMBER 1 OF 1 1 A