5051100997

9 7 8 5 6 4 3 2 1 NOTES 引き出し方向 E 1. 梱包数量： 3000個／リール NUMBER OF CONNECTORS : 3000 PCS/REEL. PULL DIRECTION E 2. リードテープ長さ LEAD TAPE LENGTH 100MIN. 空ポケット部 ⌀380 ±2 (80) EMPTY PART 引き出し方向 PULL DIRECTION 端末部(空部) トップテープリーダー部 D COMPONENT SUPPLIER 400MIN. D 160MIN. 3. カバーテープの剥離強度については、IEC60286-3に準拠。 COVER TAPE PEEL FORCE IS DEFINED BY IEC 60286-3. U D ±1 4. 製品詳細寸法については、図面 5051101008-SD を参照下さい。 DIMENTIONS OF PRODUCT, REFER TO 5051101008-SD. E ±1 C 0°) (12 (2) C 5. 材料　MATERIAL キャリアテープ : ポリスチレン トップテープ : ポリエチレンテレフタレート、ポリエチレン リール : ポリスチレン＜リサイクル材を含む＞ CARRIER TAPE : POLYSTYRENE TOP TAPE : POLYETHYLENE TEREHTHALATE, POLYETHYLENE REEL : POLYSTYRENE＜RECYCLE MATERIAL CONTAINED＞ (⌀ 10) (22) TAIL PART (EMPTY) 部品挿入部 TOP TAPE LEADER PART B B (⌀ 21) (⌀ 13) DETAIL U THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/10/10 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:08:21 7 6 5 4 EC NO: 605617 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/10/05 2018/10/10 2018/10/10 DOC TYPE DOC PART REVISION 5051100008-SD MATERIAL NUMBER SERIES A3-SIZE 505110 3 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2018/10/05 2018/10/10 2 A 0.5 FPC ZIF 2 CONT EMBT PKG PSD 000 A SHEET NUMBER CUSTOMER SEE CHART 1 OF 3 1 9 7 8 5 6 4 3 2 1 引き出し方向 PULL DIRECTION (C) (H) D (1.75) 0.5 ±0.05 (2.8) W .1 +0 0 5 ⌀ 1. W (1) (5.8) V 4 ±0.1 SECTION V-V C (1.875) V F ±0.3 (B) (C) D CONNECTOR SERIES No. 505110**16 (505110**96) 505110**17 (505110**97) (1.075) (A) (3.025) トップテープ TOP TAPE E (4.1) (B) E (2) 累積ピッチ 40 ±0.2 ACCUMULATIVE PITCH 40 ±0.2 12 ±0.1 (5.8) (1) 11.5 ---- 24 7.5 ---- 16 H G F (2.8) (4.1) B SECTION W-W SCALE 4:1 10.9 10.4 9.9 9.4 8.9 8.4 7.9 7.4 29.4 25.4 6.9 6.4 5.9 5.4 4.9 4.4 3.9 3.4 21.4 17.4 2.9 14.9 14.4 13.9 13.4 12.9 12.4 11.9 11.4 10.9 10.4 9.9 9.4 8.9 8.4 7.9 7.4 6.9 16 15.5 15 14.5 14 13.5 13 12.5 12 11.5 11 10.5 10 9.5 9 8.5 8 D B A E C 5051102096 5051101997 5051101897 5051101797 5051101697 5051101597 5051101497 5051101397 5051101297 5051101197 5051101097 5051100997 5051100897 5051100797 5051100697 5051100597 5051100497 EMBOSSED PACKAGE オーダー番号 ORDER No. 20 19 18 C 17 16 15 14 13 12 11 10 9 B 8 7 6 5 4 Ckt THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/10/10 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:08:21 7 6 5 4 EC NO: 605617 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/10/05 2018/10/10 2018/10/10 DOC TYPE DOC PART REVISION 5051100008-SD MATERIAL NUMBER SERIES A3-SIZE 505110 3 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2018/10/05 2018/10/10 2 A 0.5 FPC ZIF 2 CONT EMBT PKG PSD 000 A SHEET NUMBER CUSTOMER SEE CHART 2 OF 3 1 9 7 8 5 6 4 3 2 1 引き出し方向 PULL DIRECTION E (4.1) 0.2 ±0.05 1.5 +0.1 0 トップテープ TOP TAPE (3.025) (1.075) CONNECTOR SERIES No. 505110**16 (1.875) X 26.2 52.4 56 (H) Y (A) (B) (C) G ±0.1 F ±0.3 (B) (C) D 20.2 40.4 Y 44 (2.8) 5 1. X ⌀ (1.75) 0.5 ±0.05 +0 0 .1 C (5.8) 4 ±0.1 SECTION X-X (2) B (1) 累積ピッチ 40 ±0.2 ACCUMULATIVE PITCH 40 ±0.2 12 ±0.1 (5.8) SECTION Y-Y SCALE 4:1 26.2 52.4 56 A H DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 32 (1) (2.8) (4.1) 14.2 28.4 2018/10/10 8 G F 40.9 35.9 34.9 32.9 31.4 61.4 57.4 30.9 30.4 29.9 29.4 28.9 E D 01:08:21 7 6 C 44.9 46 39.9 41 38.9 40 36.9 38 35.4 36.5 34.9 36 34.4 35.5 33.9 35 33.4 34.5 32.9 34 B A 5051108096 5051107096 5051106896 5051106496 5051106196 5051106096 5051105996 5051105896 5051105796 5051105696 EMBOSSED PACKAGE オーダー番号 ORDER No. 5 80 70 68 64 61 60 59 58 57 56 Ckt 4 H F G 28.4 27.9 61.4 57.4 27.4 26.9 26.4 25.9 25.4 24.9 24.4 23.9 23.4 22.9 22.4 21.9 21.4 49.4 45.4 20.9 20.4 19.9 19.4 18.9 18.4 17.9 17.4 16.9 16.4 15.9 15.4 14.9 14.4 13.9 37.4 33.4 13.4 12.9 12.4 11.9 11.4 32.4 31.9 31.4 30.9 30.4 29.9 29.4 28.9 28.4 27.9 27.4 26.9 26.4 25.9 25.4 24.9 24.4 23.9 23.4 22.9 22.4 21.9 21.4 20.9 20.4 19.9 19.4 18.9 18.4 17.9 17.4 16.9 16.4 15.9 15.4 33.5 33 32.5 32 31.5 31 30.5 30 29.5 29 28.5 28 27.5 27 26.5 26 25.5 25 24.5 24 23.5 23 22.5 22 21.5 21 20.5 20 19.5 19 18.5 18 17.5 17 16.5 D B A E C 5051105596 5051105496 5051105396 5051105296 5051105196 5051105096 5051104996 5051104896 5051104796 5051104696 5051104596 5051104496 5051104396 5051104296 5051104196 5051104096 5051103996 5051103896 5051103796 5051103696 5051103596 5051103496 5051103396 5051103296 5051103196 5051103096 5051102996 5051102896 5051102796 5051102696 5051102596 5051102496 5051102396 5051102296 5051102196 EMBOSSED PACKAGE オーダー番号 ORDER No. 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 E D C B Ckt THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 605617 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/10/05 2018/10/10 2018/10/10 DOC TYPE DOC PART REVISION 5051100008-SD MATERIAL NUMBER SERIES A3-SIZE 505110 3 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2018/10/05 2018/10/10 2 A 0.5 FPC ZIF 2 CONT EMBT PKG PSD 000 A SHEET NUMBER CUSTOMER SEE CHART 3 OF 3 1 10 9 F 7 8 A ±0.2 X 5 6 4 (0.4) 3 2 1 F FPC挿入深さ (4) INSERTION DEPTH POINT (B) ⌖ 0.2 X 0.25 LENGTH TO CONTACT POINT 0.4 ±0.1 (0.15) 接点位置 (1.45) 0.5 接点位置 (1.05) LENGTH TO CONTACT POINT HOUSING E 1.42 3.95 E (5.25) ハウジング アクチュエータ ターミナル SECTION B-B SCALE 15:1 ACTUATOR TERMINAL C ±0.2 D D (5.25) B 1.9 ±0.2 (4.05) (3.95) : PICK UP AREA 0.15 ±0.1 (5.3) C 1.265 (D) 0.75 ±0.1 0.4 ±0.15 B 金具 0.9 ±0.2 FITTING NAIL 4 B 10.07 9.57 9.07 8.57 8.07 7.57 7.07 6.57 6.07 5.57 5.07 4.57 4.07 3.57 3.07 2.57 12.6 12.1 11.6 11.1 10.6 10.1 9.6 9.1 8.6 8.1 7.6 7.1 6.6 6.1 5.6 5.1 9 8.5 8 7.5 7 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 14.2 13.7 13.2 12.7 12.2 11.7 11.2 10.7 10.2 9.7 9.2 8.7 8.2 7.7 7.2 6.7 D C B A 5051101997 5051101897 5051101797 5051101697 5051101597 5051101497 5051101397 5051101297 5051101197 5051101097 5051100997 5051100897 5051100797 5051100697 5051100597 5051100497 EMBOSSED PACKAGE 19 18 17 16 15 14 C 13 12 11 10 9 8 7 6 5 B 4 Ckt オーダー番号 ORDER No. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 8:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/09/22 11:54:38 8 7 6 CONNECTOR SERIES No. 505110**17 5 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC ZIF 2 CONT HSG ASSY EC NO: 720907 DRWN: RAJMOK CHK'D: YNUKANOBU APPR: YNAITO INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION 2022/09/09 2022/09/22 2022/09/22 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/10/05 2018/10/10 DRAWING SERIES 5051101008-SD MATERIAL NUMBER CUSTOMER A3-SIZE 505110 3 PSD 000 C SHEET NUMBER 1 OF 4 2 1 A 10 9 7 8 5 6 4 (4) (B) ⌖ 0.2 X INSERTION DEPTH POINT 0.25 0.15 1 FPC挿入深さ 0.4 ±0.1 F 2 �0.4� A ±0.2 X 3 0.5 (1.45) F 接点位置 LENGTH TO CONTACT POINT (1.05) 接点位置 LENGTH TO CONTACT POINT HOUSING 1.42 3.95 �5.25� E ハウジング E アクチュエータ ACTUATOR SECTION A-A SCALE 15:1 ターミナル TERMINAL �5.3� TAIL : PICK UP AREA C ±0.2 �4.05� D 1.9 ±0.2 A 1.265 (D) 0.4 ±0.15 FITTING NAIL C A 0.9 ±0.2 A 金具 B 0.75 ±0.1 D �4.06� 0.15 ±0.1 �5.25� 40.5 35.5 34.5 32.5 31 30.5 30 29.5 29 28.5 28 27.5 27 26.5 26 25.5 D 43.1 38.1 37.1 35.1 33.6 33.1 32.6 32.1 31.6 31.1 30.6 30.1 29.6 29.1 28.6 28.1 39.5 34.5 33.5 31.5 30 29.5 29 28.5 28 27.5 27 26.5 26 25.5 25 24.5 C DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 44.7 39.7 38.7 36.7 35.2 34.7 34.2 33.7 33.2 32.7 32.2 31.7 31.2 30.7 30.2 29.7 A B P1 C 5051108096 5051107096 5051106896 5051106496 5051106196 5051106096 5051105996 5051105896 5051105796 5051105696 5051105596 5051105496 5051105396 5051105296 5051105196 5051105096 EMBOSSED PACKAGE オーダー番号 ORDER No. RELEASE DATE 9 2022/09/22 80 70 68 64 61 60 59 58 57 56 55 54 53 52 51 50 25 24.5 24 23.5 23 22.5 22 21.5 21 20.5 27.6 27.1 26.6 26.1 25.6 25.1 24.6 24.1 23.6 23.1 24 23.5 23 22.5 22 21.5 21 20.5 20 19.5 29.2 28.7 28.2 27.7 27.2 26.7 26.2 25.7 25.2 24.7 D C B A 5051104996 5051104896 5051104796 5051104696 5051104596 5051104496 5051104396 5051104296 5051104196 5051104096 EMBOSSED PACKAGE オーダー番号 ORDER No. 20 19.5 19 18.5 18 17.5 17 16.5 16 15.5 22.6 22.1 21.6 21.1 20.6 20.1 19.6 19.1 18.6 18.1 19 18.5 18 17.5 17 16.5 16 15.5 15 14.5 24.2 23.7 23.2 22.7 22.2 21.7 21.2 20.7 20.2 19.7 Ckt D C B A 5051103996 5051103896 5051103796 5051103696 5051103596 5051103496 5051103396 5051103296 5051103196 5051103096 EMBOSSED PACKAGE オーダー番号 ORDER No. 39 38 37 36 35 34 33 32 31 30 15 14.5 14 13.5 13 12.5 12 11.5 11 10.5 17.6 17.1 16.6 16.1 15.6 15.1 14.6 14.1 13.6 13.1 14 13.5 13 12.5 12 11.5 11 10.5 10 9.5 19.2 18.7 18.2 17.7 17.2 16.7 16.2 15.7 15.2 14.7 Ckt D C B A 5051102996 5051102896 5051102796 5051102696 5051102596 5051102496 5051102396 5051102296 5051102196 5051102096 EMBOSSED PACKAGE 29 28 27 26 25 24 23 22 21 B 20 Ckt オーダー番号 ORDER No. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 8:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) Ckt 11:54:38 8 49 48 47 46 45 44 43 42 41 40 7 6 CONNECTOR SERIES No. 505110**16 5 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC ZIF 2 CONT HSG ASSY EC NO: 720907 DRWN: RAJMOK CHK'D: YNUKANOBU APPR: YNAITO INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION 2022/09/09 2022/09/22 2022/09/22 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/10/05 2018/10/10 DRAWING SERIES 5051101008-SD MATERIAL NUMBER CUSTOMER A3-SIZE 505110 3 PSD 000 C SHEET NUMBER 2 OF 4 2 1 A 10 9 7 8 5 6 4 3 2 1 0.5(N+1) ±0.07 0.5 ±0.1 (0.5±0.08) +0.04 0.35 +0.04 -0.03 (0.3-0.03 ) 0.3 ±0.05 / 0.3 ±0.03 (*1) 仕上がり厚さ 0.3 ±0.05 / 0.3 ±0.03 (*1) 仕上がり厚さ THICKNESS THICKNESS NICKEL UNDER (1-5μm) めっき : 金めっき(0.1μm以上) D 下地ニッケル(1-5μm) 2- R 0.2 MAX. PLATING : GOLD(0.1μm Min.) 2- R 0.2 MAX. めっき : 金めっき(0.1μm以上) E (STIFFENER) 1.5 ±0.1 2- R 0.2 MAX. 5 MIN. (補強板) (PITCH) 3.5 ±0.3 0.5 ±0.05 2- R 0.3 ±0.2 2.2 ±0.05 5 1.1 ±0.1 0.55 ±0.05 NICKEL UNDER (1-5μm) 0.5(N-1) ±0.05 下地ニッケル(1-5μm) 0.5 ±0.1 (0.5±0.08) F *1 : 125°Cを超える環境下で使用する場合に適用。 Apply when use in over 125 deg.C environment. PLATING : GOLD(0.1μm Min.) F E D 適合FPC/FFC推奨寸法 APPLICABLE FPC/FFC RECOMMENDED DIMENSION ( ) : FFCに適用 FPC構成推奨仕様 FFC構成推奨仕様 STRUCTURE OF FPC STRUCTURE OF FFC C STIFFENER : PET 補強板 : ポリエステル系 ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 接着剤(難燃ポリエステル系) INSULATING FILM : PET (25μm) 絶縁テープ : ポリエステル系 (25μm) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 接着剤(難燃ポリエステル系) CONDUCTOR : COPPER FOIL (35μm or 50μm) 導体部 : 銅箔 (35μm or 50μm) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 接着剤(難燃ポリエステル系) INSULATING FILM : PET (25μm) 絶縁テープ : ポリエステル系 (25μm) STIFFENER : POLYIMIDE 補強板：ポリイミド THERMOSETTING ADHESIVE 熱硬化接着剤 BASE FILM : POLYIMIDE (25μm) ベースフィルム : ポリイミド (25μm) THERMOSETTING ADHESIVE (STIFFENER) B 5 MIN. (補強板) (PITCH) 熱硬化接着剤 2- R 0.3 ±0.2 (0.3+0.04 ) -0.03 CONDUCTOR : COPPER FOIL (35μm) 0.5 ±0.05 導体部 : 銅箔 (35μm) 0.35 +0.04 -0.03 3.5 ±0.3 5 0.5 ±0.1 (0.5±0.08) 0.5(N-1) ±0.05 THERMOSETTING ADHESIVE 0.5 ±0.1 (0.5±0.08) C 熱硬化接着剤 0.5(N+1) ±0.07 COVER FILM : POLYIMIDE(25μm) カバーレイ : ポリイミド(25μm) ( ) : APPLY TO FFC B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 10:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 適合FPC/FFC推奨寸法 APPLICABLE FPC/FFC RECOMMENDED DIMENSION ( ) : FFCに適用 A ( ) : APPLY TO FFC DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/09/22 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:54:38 8 ANGULAR TOL 7 6 5 4 0.5 FPC ZIF 2 CONT HSG ASSY EC NO: 720907 DRWN: RAJMOK CHK'D: YNUKANOBU APPR: YNAITO INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION 2022/09/09 2022/09/22 2022/09/22 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/10/05 2018/10/10 DRAWING SERIES 5051101008-SD MATERIAL NUMBER CUSTOMER A3-SIZE 505110 3 PSD 000 C SHEET NUMBER 3 OF 4 2 1 A 10 9 8 (2) 1.3 ±0.05 (2.6) 0.5 ±0.05 (PITCH) (公差非累積) 2 1 ハウジング HOUSING 0.3 ±0.05 : 液晶ポリマー　ガラス充填、UL94V-0 (ベージュ) LIQUID CRYSTAL POLYMER GLASS FILLED, UL94V-0 (BEIGE) アクチュエータ : ポリアミド　ガラス充填、UL94V-0 (黒) ACTUATOR POLYAMIDE GLASS FILLED, UL94V-0 (BLACK) ターミナル TERMINAL : 銅合金(t=0.15) COPPER ALLOY 金具 : リン青銅 (t=0.15) FITTING NAIL PHOSPHOR BRONZE (0.3) 1.55 ±0.05 F 1. 使用材料 MATERIAL (2) E 2. めっき仕様 PLATING ターミナル TERMINAL コンタクト部：部分金めっき (0.05μm以上) CONTACT AREA : SEPARATED GOLD PLATING (0.05μm MINIMUM) 1.3 ±0.05 E 3 注記　NOTES 3.3 ±0.05 1.3 ±0.05 4 1 ±0.05 (NON-ACCUMULATIVE) 5 6 0.5(N-1) ±0.05 3.3 ±0.05 F 7 テール部 : 部分金めっき SOLDER TAIL AREA : SEPARATED GOLD PLATING 　 D コネクタ位置 CONNECTOR POSITION 参考マスク厚 : 100µm 推奨基板レイアウト RECOMMENDED P.W.B PATTERN LAYOUT REFERENCE SCREEN THICKNESS : 100µm 参考マスク開口率 : 100% REFERENCE SCREEN OPEN RATIO : 100% C B A FPC/FFCについて　ABOUT FPC/FFC 　打ち抜き方向は導体側から補強板側を推奨します。 　導体部については軟箔銅35μmまたは50μmを推奨します。 　FFCに規定された定格温度がFFC単体前提である場合が御座います。 　コネクタと組み合わせての実使用において、接着層が劣化するなどの信頼性を満足できないケースを回避するため、 　実機での評価/確認をお願いいたします。 　RECOMMENDED PUNCHING DIRECTION : FROM CONDUCTOR SIDE TO STIFFENER SIDE 　RECOMMENDED CONDUCTOR SPEC : SOFT COPPER FOIL 　RECOMMENDED CONDUCTOR THICKNESS : 35 MICROMETER OR 50 MICROMETER 　NOTE : WHEN ACTUALLY USING IT WITH CONNECTOR, PLEASE DO THE EVALUATION AND THE 　 CONFIRMATION WITH AN ACTUAL EQUIPMENT TO EVADE THE CASE WHERE RELIABILITY 　 CANNOT BE FILLED (THE ADHESIVE LINE OF FFC IS DETERIORATED ETC.) DOCUMENT STATUS P1 RELEASE DATE 9 2022/09/22 金具 FITTING NAIL 錫めっき (1.0μm以上) TIN PLATING (1.0μm MINIMUM) 下地:ニッケルめっき (1.0μm以上) UNDER PLATING : NICKEL PLATING (1.0μm MINIMUM) 3. エンボステープ梱包時は、アクチュエータが閉じた状態とする。 IN THE PACKAGE, ACTUATOR OF PART SHOULD BE CLOSED. 4 パターン剥離止め用金具 FITTING NAIL FOR PREVENTING PEELING OF P.W.B. PATTERN. 5 R0.3はFPC/FFC導体部にかからないこと。 R0.3 MUST NOT BE OVERLAPPED TO PATTERN OF FPC/FFC. 6. N : 極数 N : CIRCUIT 7. テールと金具を併せた平坦度は0.1mm以下とする。 TAILS AND NAILS COPLANALITY TO BE 0.1mm MAXIMUM. DIMENSION UNITS SCALE mm 15:1 6 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 11:54:38 8 D B FPCについて　ABOUT FPC 　補強フィルム材質はポリイミドを推奨します。ベースフィルムは25μmを推奨します。 　接着剤は熱硬化接着剤を推奨します。 　尚、接着剤の接点部への付着は導通不良の原因になりますので、染み出しが無い様お願い致します。 　RECOMMENDED STIFFENER MATERIAL : POLYIMIDE 　RECOMMENDED BASE FILM THICKNESS : 25 MICROMETER 　RECOMMENDED ADHESIVE : THERMOSETTING ADHESIVE 　NOTE : PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A 　 POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY. FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 下地:ニッケルめっき (1.0μm以上) UNDERPLATE : NICKEL OVERALL (1.0μm MINIMUM) 5 4 0.5 FPC ZIF 2 CONT HSG ASSY EC NO: 720907 DRWN: RAJMOK CHK'D: YNUKANOBU APPR: YNAITO INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION 2022/09/09 2022/09/22 2022/09/22 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/10/05 2018/10/10 DRAWING SERIES 5051101008-SD MATERIAL NUMBER CUSTOMER A3-SIZE 505110 3 PSD 000 C SHEET NUMBER 4 OF 4 2 1 A