5051102591

9 7 8 5 6 4 3 2 1 NOTES 引き出し方向 E 1. 梱包数量： 3000個／リール NUMBER OF CONNECTORS : 3000 PCS/REEL. PULL DIRECTION E 2. リードテープ長さ LEAD TAPE LENGTH 100MIN. 空ポケット部 ⌀380 ±2 (80) EMPTY PART 引き出し方向 PULL DIRECTION 端末部(空部) トップテープリーダー部 D COMPONENT SUPPLIER 400MIN. D 160MIN. 3. カバーテープの剥離強度については、IEC60286-3に準拠。 COVER TAPE PEEL FORCE IS DEFINED BY IEC 60286-3. U D ±1 4. 製品詳細寸法については、図面 5051101000-SD を参照下さい。 DIMENTIONS OF PRODUCT, REFER TO 5051101000-SD. E ±1 C 0°) (12 (2) C 5. 材料　MATERIAL キャリアテープ : ポリスチレン トップテープ : ポリエチレンテレフタレート、ポリエチレン リール : ポリスチレン＜リサイクル材を含む＞ CARRIER TAPE : POLYSTYRENE TOP TAPE : POLYETHYLENE TEREHTHALATE, POLYETHYLENE REEL : POLYSTYRENE＜RECYCLE MATERIAL CONTAINED＞ (⌀ 10) (22) TAIL PART (EMPTY) 部品挿入部 TOP TAPE LEADER PART B B (⌀ 21) (⌀ 13) DETAIL U THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/10/10 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:08:19 7 6 5 4 EC NO: 605617 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/09/28 2018/10/10 2018/10/10 DOC TYPE DOC PART REVISION 5051100000-SD MATERIAL NUMBER SERIES A3-SIZE 505110 3 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2018/09/28 2018/10/10 2 A 0.5 FPC ZIF 2 CONT EMBT PKG PSD 000 A SHEET NUMBER CUSTOMER SEE CHART 1 OF 3 1 9 7 8 5 6 4 3 2 1 引き出し方向 PULL DIRECTION (C) (H) D (1.75) 0.5 ±0.05 (2.8) W .1 +0 0 5 ⌀ 1. W (1) (5.8) V 4 ±0.1 SECTION V-V C (1.875) V F ±0.3 (B) (C) D CONNECTOR SERIES No. 505110**11 (505110**91) 505110**12 (505110**92) (1.075) (A) (3.025) トップテープ TOP TAPE E (4.1) (B) E (2) 累積ピッチ 40 ±0.2 ACCUMULATIVE PITCH 40 ±0.2 12 ±0.1 (5.8) (1) 11.5 ---- 24 7.5 ---- 16 H G F (2.8) (4.1) B SECTION W-W SCALE 4:1 10.9 10.4 9.9 9.4 8.9 8.4 7.9 7.4 29.4 25.4 6.9 6.4 5.9 5.4 4.9 4.4 3.9 3.4 21.4 17.4 2.9 14.9 14.4 13.9 13.4 12.9 12.4 11.9 11.4 10.9 10.4 9.9 9.4 8.9 8.4 7.9 7.4 6.9 16 15.5 15 14.5 14 13.5 13 12.5 12 11.5 11 10.5 10 9.5 9 8.5 8 D B A E C 5051102091 5051101992 5051101892 5051101792 5051101692 5051101592 5051101492 5051101392 5051101292 5051101192 5051101092 5051100992 5051100892 5051100792 5051100692 5051100592 5051100492 EMBOSSED PACKAGE オーダー番号 ORDER No. 20 19 18 C 17 16 15 14 13 12 11 10 9 B 8 7 6 5 4 Ckt THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/10/10 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:08:19 7 6 5 4 EC NO: 605617 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/09/28 2018/10/10 2018/10/10 DOC TYPE DOC PART REVISION 5051100000-SD MATERIAL NUMBER SERIES A3-SIZE 505110 3 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2018/09/28 2018/10/10 2 A 0.5 FPC ZIF 2 CONT EMBT PKG PSD 000 A SHEET NUMBER CUSTOMER SEE CHART 2 OF 3 1 9 7 8 5 6 4 3 2 1 引き出し方向 PULL DIRECTION E (4.1) 0.2 ±0.05 1.5 +0.1 0 トップテープ TOP TAPE (3.025) (1.075) CONNECTOR SERIES No. 505110**11 (1.875) X 26.2 52.4 56 (H) Y (A) (B) (C) G ±0.1 F ±0.3 (B) (C) D 20.2 40.4 Y 44 (2.8) 5 1. X ⌀ (1.75) 0.5 ±0.05 +0 0 .1 C (5.8) 4 ±0.1 SECTION X-X (2) B (1) 累積ピッチ 40 ±0.2 ACCUMULATIVE PITCH 40 ±0.2 12 ±0.1 (5.8) SECTION Y-Y SCALE 4:1 26.2 52.4 56 A H DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 32 (1) (2.8) (4.1) 14.2 28.4 2018/10/10 8 G F 40.9 35.9 34.9 32.9 31.4 61.4 57.4 30.9 30.4 29.9 29.4 28.9 E D 01:08:19 7 6 C 44.9 46 39.9 41 38.9 40 36.9 38 35.4 36.5 34.9 36 34.4 35.5 33.9 35 33.4 34.5 32.9 34 B A 5051108091 5051107091 5051106891 5051106491 5051106191 5051106091 5051105991 5051105891 5051105791 5051105691 EMBOSSED PACKAGE オーダー番号 ORDER No. 5 80 70 68 64 61 60 59 58 57 56 Ckt 4 H F G 28.4 27.9 61.4 57.4 27.4 26.9 26.4 25.9 25.4 24.9 24.4 23.9 23.4 22.9 22.4 21.9 21.4 49.4 45.4 20.9 20.4 19.9 19.4 18.9 18.4 17.9 17.4 16.9 16.4 15.9 15.4 14.9 14.4 13.9 37.4 33.4 13.4 12.9 12.4 11.9 11.4 32.4 31.9 31.4 30.9 30.4 29.9 29.4 28.9 28.4 27.9 27.4 26.9 26.4 25.9 25.4 24.9 24.4 23.9 23.4 22.9 22.4 21.9 21.4 20.9 20.4 19.9 19.4 18.9 18.4 17.9 17.4 16.9 16.4 15.9 15.4 33.5 33 32.5 32 31.5 31 30.5 30 29.5 29 28.5 28 27.5 27 26.5 26 25.5 25 24.5 24 23.5 23 22.5 22 21.5 21 20.5 20 19.5 19 18.5 18 17.5 17 16.5 D B A E C 5051105591 5051105491 5051105391 5051105291 5051105191 5051105091 5051104991 5051104891 5051104791 5051104691 5051104591 5051104491 5051104391 5051104291 5051104191 5051104091 5051103991 5051103891 5051103791 5051103691 5051103591 5051103491 5051103391 5051103291 5051103191 5051103091 5051102991 5051102891 5051102791 5051102691 5051102591 5051102491 5051102391 5051102291 5051102191 EMBOSSED PACKAGE オーダー番号 ORDER No. 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 E D C B Ckt THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 605617 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/09/28 2018/10/10 2018/10/10 DOC TYPE DOC PART REVISION 5051100000-SD MATERIAL NUMBER SERIES A3-SIZE 505110 3 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2018/09/28 2018/10/10 2 A 0.5 FPC ZIF 2 CONT EMBT PKG PSD 000 A SHEET NUMBER CUSTOMER SEE CHART 3 OF 3 1 10 9 7 8 5 6 4 3 2 1 F F A ±0.2 X (0.4) FPC挿入深さ (4) INSERTION DEPTH POINT (B) 0.25 (0.15) LENGTH TO CONTACT POINT 0.4 ±0.1 ⌖ 0.2 X 接点位置 (1.45) 0.5 (1.05) 接点位置 LENGTH TO CONTACT POINT ハウジング E HOUSING 1.42 3.95 アクチュエータ C ±0.2 TERMINAL D (5.3) TAIL : PICK UP AREA (5.25) (4.05) 1.9 ±0.2 B 0.15 ±0.1 D ターミナル SECTION B-B SCALE 15:1 ACTUATOR (3.95) (5.25) E C 1.265 (D) B 金具 FITTING NAIL 4 0.75 ±0.1 0.9 ±0.2 0.4 ±0.15 B 10.07 9.57 9.07 8.57 8.07 7.57 7.07 6.57 6.07 5.57 5.07 4.57 4.07 3.57 3.07 2.57 12.6 12.1 11.6 11.1 10.6 10.1 9.6 9.1 8.6 8.1 7.6 7.1 6.6 6.1 5.6 5.1 9 8.5 8 7.5 7 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 14.2 13.7 13.2 12.7 12.2 11.7 11.2 10.7 10.2 9.7 9.2 8.7 8.2 7.7 7.2 6.7 D C B A 5051101992 5051101892 5051101792 5051101692 5051101592 5051101492 5051101392 5051101292 5051101192 5051101092 5051100992 5051100892 5051100792 5051100692 5051100592 5051100492 EMBOSSED PACKAGE 19 18 17 16 15 14 C 13 12 11 10 9 8 7 6 5 B 4 Ckt オーダー番号 ORDER No. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 8:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/09/22 11:54:33 8 7 CONNECTOR SERIES No. 505110**12 5 6 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC ZIF 2 CONT HSG ASSY EC NO: 720907 DRWN: RAJMOK CHK'D: YNUKANOBU APPR: YNAITO INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION 2022/09/21 2022/09/22 2022/09/22 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/10/01 2018/10/10 DRAWING SERIES 5051101000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 505110 3 PSD 000 B SHEET NUMBER 1 OF 4 2 1 A 10 9 7 8 4 A ±0.2 X F 5 6 3 (0.4) 2 (4) 1 FPC挿入深さ INSERTION DEPTH POINT (1.45) (B) F 接点位置 LENGTH TO CONTACT POINT 0.25 ⌖ 0.2 X 0.5 0.4 ±0.1 (0.15) (1.05) 接点位置 LENGTH TO CONTACT POINT HOUSING 1.42 3.95 E (5.25) ハウジング E アクチュエータ ターミナル SECTION A-A SCALE 15:1 ACTUATOR TERMINAL (5.3) TAIL : PICK UP AREA 0.15 ±0.1 (5.25) (4.05) D D 1.9 ±0.2 A (4.06) C ±0.2 1.265 (D) 0.75 ±0.1 0.9 ±0.2 A 金具 FITTING NAIL 0.4 ±0.15 4 C B A C 40.5 35.5 34.5 32.5 31 30.5 30 29.5 29 28.5 28 27.5 27 26.5 26 25.5 D 43.1 38.1 37.1 35.1 33.6 33.1 32.6 32.1 31.6 31.1 30.6 30.1 29.6 29.1 28.6 28.1 39.5 34.5 33.5 31.5 30 29.5 29 28.5 28 27.5 27 26.5 26 25.5 25 24.5 C DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 44.7 39.7 38.7 36.7 35.2 34.7 34.2 33.7 33.2 32.7 32.2 31.7 31.2 30.7 30.2 29.7 5051108091 5051107091 5051106891 5051106491 5051106191 5051106091 5051105991 5051105891 5051105791 5051105691 5051105591 5051105491 5051105391 5051105291 5051105191 5051105091 EMBOSSED PACKAGE A B P1 オーダー番号 ORDER No. RELEASE DATE 9 2022/09/22 80 70 68 64 61 60 59 58 57 56 55 54 53 52 51 50 25 24.5 24 23.5 23 22.5 22 21.5 21 20.5 27.6 27.1 26.6 26.1 25.6 25.1 24.6 24.1 23.6 23.1 24 23.5 23 22.5 22 21.5 21 20.5 20 19.5 29.2 28.7 28.2 27.7 27.2 26.7 26.2 25.7 25.2 24.7 D C B A オーダー番号 ORDER No. 49 48 47 46 45 44 43 42 41 40 20 19.5 19 18.5 18 17.5 17 16.5 16 15.5 22.6 22.1 21.6 21.1 20.6 20.1 19.6 19.1 18.6 18.1 19 18.5 18 17.5 17 16.5 16 15.5 15 14.5 24.2 23.7 23.2 22.7 22.2 21.7 21.2 20.7 20.2 19.7 Ckt D C B A 5051103991 5051103891 5051103791 5051103691 5051103591 5051103491 5051103391 5051103291 5051103191 5051103091 EMBOSSED PACKAGE オーダー番号 ORDER No. 39 38 37 36 35 34 33 32 31 30 15 14.5 14 13.5 13 12.5 12 11.5 11 10.5 17.6 17.1 16.6 16.1 15.6 15.1 14.6 14.1 13.6 13.1 14 13.5 13 12.5 12 11.5 11 10.5 10 9.5 19.2 18.7 18.2 17.7 17.2 16.7 16.2 15.7 15.2 14.7 Ckt D C B A 5051102991 5051102891 5051102791 5051102691 5051102591 5051102491 5051102391 5051102291 5051102191 5051102091 EMBOSSED PACKAGE 29 28 27 26 25 24 23 22 21 B 20 Ckt オーダー番号 ORDER No. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 8:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) Ckt 11:54:33 8 5051104991 5051104891 5051104791 5051104691 5051104591 5051104491 5051104391 5051104291 5051104191 5051104091 EMBOSSED PACKAGE 7 CONNECTOR SERIES No. 505110**11 5 6 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC ZIF 2 CONT HSG ASSY EC NO: 720907 DRWN: RAJMOK CHK'D: YNUKANOBU APPR: YNAITO INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION 2022/09/21 2022/09/22 2022/09/22 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/10/01 2018/10/10 DRAWING SERIES 5051101000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 505110 3 PSD 000 B SHEET NUMBER 2 OF 4 2 1 A 10 9 7 8 5 6 4 3 2 1 0.5(N+1) ±0.07 0.5 ±0.1 (0.5±0.08) +0.04 0.35 +0.04 -0.03 (0.3-0.03 ) 0.3 ±0.05 仕上がり厚さ 0.3 ±0.05 仕上がり厚さ THICKNESS THICKNESS NICKEL UNDER (1-5μm) めっき : 金めっき(0.1μm以上) D 下地ニッケル(1-5μm) 2- R 0.2 MAX. PLATING : GOLD (0.1μm Min.) 2- R 0.2 MAX. めっき : 金めっき(0.1μm以上) E (STIFFENER) 1.5 ±0.1 2- R 0.2 MAX. 5 MIN. (補強板) (PITCH) 3.5 ±0.3 0.5 ±0.05 2- R 0.3 ±0.2 2.2 ±0.05 5 1.1 ±0.1 0.55 ±0.05 NICKEL UNDER (1-5μm) 0.5(N-1) ±0.05 下地ニッケル(1-5μm) 0.5 ±0.1 (0.5±0.08) F PLATING : GOLD (0.1μm Min.) F E D 適合FPC/FFC推奨寸法 APPLICABLE FPC/FFC RECOMMENDED DIMENSION ( ) : FFCに適用 FPC構成推奨仕様 FFC構成推奨仕様 STRUCTURE OF FPC STRUCTURE OF FFC C STIFFENER : PET 補強板 : ポリエステル系 ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 接着剤(難燃ポリエステル系) INSULATING FILM : PET (25μm) 絶縁テープ : ポリエステル系 (25μm) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 接着剤(難燃ポリエステル系) CONDUCTOR : COPPER FOIL (35μm or 50μm) 導体部 : 銅箔 (35μm or 50μm) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 接着剤(難燃ポリエステル系) INSULATING FILM : PET (25μm) 絶縁テープ : ポリエステル系 (25μm) STIFFENER : POLYIMIDE 補強板：ポリイミド THERMOSETTING ADHESIVE 熱硬化接着剤 BASE FILM : POLYIMIDE (25μm) ベースフィルム : ポリイミド (25μm) THERMOSETTING ADHESIVE (STIFFENER) B 5 MIN. (補強板) (PITCH) 熱硬化接着剤 2- R 0.3 ±0.2 (0.3+0.04 ) -0.03 CONDUCTOR : COPPER FOIL (35μm) 0.5 ±0.05 導体部 : 銅箔 (35μm) 0.35 +0.04 -0.03 3.5 ±0.3 5 0.5 ±0.1 (0.5±0.08) 0.5(N-1) ±0.05 THERMOSETTING ADHESIVE 0.5 ±0.1 (0.5±0.08) C 熱硬化接着剤 0.5(N+1) ±0.07 COVER FILM : POLYIMIDE(25μm) カバーレイ : ポリイミド(25μm) ( ) : APPLY TO FFC B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 10:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 適合FPC/FFC推奨寸法 APPLICABLE FPC/FFC RECOMMENDED DIMENSION ( ) : FFCに適用 A ( ) : APPLY TO FFC DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/09/22 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:54:33 8 ANGULAR TOL 7 6 5 4 0.5 FPC ZIF 2 CONT HSG ASSY EC NO: 720907 DRWN: RAJMOK CHK'D: YNUKANOBU APPR: YNAITO INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION 2022/09/21 2022/09/22 2022/09/22 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/10/01 2018/10/10 DRAWING SERIES 5051101000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 505110 3 PSD 000 B SHEET NUMBER 3 OF 4 2 1 A 10 9 7 8 0.5(N-1) ±0.05 3.3 ±0.05 5 6 1.3 ±0.05 2 1 F 1. 使用材料 MATERIAL 0.5 ±0.05 (PITCH) (公差非累積) (2) 1.3 ±0.05 (NON-ACCUMULATIVE) (2.6) 3 注記　NOTES 3.3 ±0.05 F (2) 4 ハウジング HOUSING 0.3 ±0.05 : 液晶ポリマー　ガラス充填、UL94V-0 (ベージュ) LIQUID CRYSTAL POLYMER GLASS FILLED, UL94V-0 (BEIGE) ターミナル TERMINAL コンタクト部：部分金めっき (0.05μm以上) CONTACT AREA : SEPARATED GOLD PLATING (0.05μm MINIMUM) テール部 : 部分金めっき SOLDER TAIL AREA : SEPARATED GOLD PLATING コネクタ位置 参考マスク厚 : 100µm 推奨基板レイアウト RECOMMENDED P.W.B PATTERN LAYOUT A 参考マスク開口率 : 100% FPC/FFCについて　ABOUT FPC/FFC 　打ち抜き方向は導体側から補強板側を推奨します。 　導体部については軟箔銅35μmまたは50μmを推奨します。 　FFCに規定された定格温度がFFC単体前提である場合が御座います。 　コネクタと組み合わせての実使用において、接着層が劣化するなどの信頼性を満足できないケースを回避するため、 　実機での評価/確認をお願いいたします。 　RECOMMENDED PUNCHING DIRECTION : FROM CONDUCTOR SIDE TO STIFFENER SIDE 　RECOMMENDED CONDUCTOR SPEC : SOFT COPPER FOIL 　RECOMMENDED CONDUCTOR THICKNESS : 35 MICROMETER OR 50 MICROMETER 　NOTE : WHEN ACTUALLY USING IT WITH CONNECTOR, PLEASE DO THE EVALUATION AND THE 　 CONFIRMATION WITH AN ACTUAL EQUIPMENT TO EVADE THE CASE WHERE RELIABILITY 　 CANNOT BE FILLED (THE ADHESIVE LINE OF FFC IS DETERIORATED ETC.) DOCUMENT STATUS P1 RELEASE DATE 9 2022/09/22 3. エンボステープ梱包時は、アクチュエータが閉じた状態とする。 IN THE PACKAGE, ACTUATOR OF PART SHOULD BE CLOSED. 4 パターン剥離止め用金具 FITTING NAIL FOR PREVENTING PEELING OF P.W.B. PATTERN. 5 R0.3はFPC/FFC導体部にかからないこと。 R0.3 MUST NOT BE OVERLAPPED TO PATTERN OF FPC/FFC. 6. N : 極数 N : CIRCUIT 7. テールと金具を併せた平坦度は0.1mm以下とする。 TAILS AND NAILS COPLANALITY TO BE 0.1mm MAXIMUM. DIMENSION UNITS SCALE mm 15:1 6 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 11:54:33 8 下地:ニッケルめっき (1.0μm以上) UNDER PLATING : NICKEL PLATING (1.0μm MINIMUM) B FPCについて　ABOUT FPC 　補強フィルム材質はポリイミドを推奨します。ベースフィルムは25μmを推奨します。 　接着剤は熱硬化接着剤を推奨します。 　尚、接着剤の接点部への付着は導通不良の原因になりますので、染み出しが無い様お願い致します。 　RECOMMENDED STIFFENER MATERIAL : POLYIMIDE 　RECOMMENDED BASE FILM THICKNESS : 25 MICROMETER 　RECOMMENDED ADHESIVE : THERMOSETTING ADHESIVE 　NOTE : PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A 　 POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY. FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 D REFERENCE SCREEN THICKNESS : 100µm REFERENCE SCREEN OPEN RATIO : 100% B 下地:ニッケルめっき (1.0μm以上) UNDERPLATE : NICKEL OVERALL (1.0μm MINIMUM) 金具 FITTING NAIL 錫めっき (1.0μm以上) TIN PLATING (1.0μm MINIMUM) CONNECTOR POSITION C E 2. めっき仕様 PLATING 　 D : リン青銅 (t=0.15) PHOSPHOR BRONZE 金具 : リン青銅 (t=0.15) FITTING NAIL PHOSPHOR BRONZE 1.3 ±0.05 E ターミナル TERMINAL (0.3) 1.55 ±0.05 1 ±0.05 アクチュエータ : ポリアミド　ガラス充填、UL94V-0 (黒) ACTUATOR POLYAMIDE GLASS FILLED, UL94V-0 (BLACK) 5 4 0.5 FPC ZIF 2 CONT HSG ASSY EC NO: 720907 DRWN: RAJMOK CHK'D: YNUKANOBU APPR: YNAITO INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION 2022/09/21 2022/09/22 2022/09/22 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/10/01 2018/10/10 DRAWING SERIES 5051101000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 505110 3 PSD 000 B SHEET NUMBER 4 OF 4 2 1 A