5055670971

10 9 7 8 5 6 4 3 2 1 注記： NOTES : ℄ F 1 材料及び仕上げ(めっき仕様)：TABLE 1, TABLE2 参照 MATERIAL AND FINISHES (PLATING SPECIFICATION) : SEE TABLE 1, TABLE2. 2 製品仕様書、コネクタ取扱説明書、適合嵌合相手、適合リテーナーはSHEET 5を ご参照下さい。 PLEASE REFER TO SHEET 5 FOR PRODUCT SPECIFICATION, APPLICATION SPECIFICATION, MATE WITH AND APPLICABLE RETAINER. F 3. 端子テール部 及び ネイルの平坦度：0.1 MAXIMUM TAIL AND NAIL COPLANARITY TO BE 0.1 MAXIMUM (C) (NAIL POSITION) (0.2) (NAIL THICKNESS) Z A E 回路番号1 マーク CIRCUIT 1 MARK 4 偶数極に適合 APPLY TO EVEN CIRCUIT 5 発注番号：SHEET 5 参照 ORDER NUMBER : PLEASE REFER TO SHEET 5 (B) NAIL ℄ 3.9 (0.25) 極数 CIRCUIT SIZE (0.4) 回路番号 1 D E 505567**7* ③ ネイル (1.25) (PITCH) CIRCUIT 1 (0.625) 4 Z 回路番号 N CIRCUIT N 0.87 ±0.1 番号 NO. ハウジングカラー HOUSING COLOR 0 ナチュラル (ベージュ) NATURAL(BEIGE) 1 黒 BLACK 2 赤 RED 3 黄 YELLOW 4 青 BLUE 6 緑 GREEN 8 橙 ORANGE 1.5 (NAIL) ① ハウジング 4.2 HOUSING C ② ターミナル 奇数キャビティ：トレードマーク 偶数キャビティ：キャビティ番号及び金型番号 ODD CAVITY:TRADE MARK EVEN CAVITY:CAVITY AND MOLD NO. ODD CAVITY:CAVITY AND MOLD NO. EVEN CAVITY:TRADE MARK 1 番号 部品 NO. PART ① SECTION Z-Z TERMINAL 奇数キャビティ：キャビティ番号及び金型番号 偶数キャビティ：トレードマーク B 0.65 ±0.1 (TERMINAL) TABLE 1 材質 MATERIAL ハウジング ポリアミド(PA), ガラス充填, UL94 V-0, 色：SHEET 5参照 HOUSING POLYAMIDE (PA), GLASS FILLED, UL94 V-0, COLOR : SEE SHEET 5 黄銅 BRASS ② ターミナル 錫ビスマスめっき：1.0 MICROMETER MINIMUM TERMINAL TIN-BISMUTH PLATING ③ ネイル NAIL DOCUMENT STATUS DIMENSION UNITS SCALE mm NTS 黄銅 BRASS ANGULAR TOL ± 4 PLACES ± 0.2 錫めっき：1.0 MICROMETER MINIMUM MATTE TIN PLATING 3 PLACES ± 0.2 2 PLACES ± 0.2 P1 RELEASE DATE 9 2023/02/16 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:40 8 18.75 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 5 3.75 2.5 1.25 23.25 22 20.75 19.5 18.25 17 15.75 14.5 13.25 12 10.75 9.5 8.25 7 5.75 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C B A 極数 CIRCUIT SIZE C B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ニッケルめっき(下地全面) : 1.0 MICROMETER MINIMUM NICKEL (UNDER-PLATING OVERALL) FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 22.2 20.95 19.7 18.45 17.2 15.95 14.7 13.45 12.2 10.95 9.7 8.45 7.2 5.95 4.7 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ニッケルめっき(下地全面) : 1.0 MICROMETER MINIMUM NICKEL (UNDER-PLATING OVERALL) A D 7 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW RIGHT ANGLE SMT PLUG ASSEMBLY TIN-BISMUTH PLATING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/11/24 2017/12/06 DRAWING SERIES A3-SIZE 505567 3 5055670000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 D SHEET NUMBER 1 OF 5 1 A 10 製品形状 PRODUCT SHAPE 9 7 8 6 5 4 3 2 1 F F E E 2-11極 2-11 CIRCUIT 12-13極 12-13 CIRCUIT 15-16極 15-16 CIRCUIT 14極 14 CIRCUIT D D B (1.3) TYP.(2) 2.15 ±0.1 (0.3) TYP.(2) (A) (CONNECTOR) (2.7) TYP.(2) (0.5) TYP.(2) 1.25 ±0.1 ℄ OF C 基板パターンレイアウト（参考） (参考：基板厚 1.6mm, メタルマスク厚さ 0.15mm, マスク開口率 100%) RECOMMEND PCB LAYOUT : COMPONENT SIDE (REFERENCE : PCB THICKNESS 1.6mm, STENCIL THICKNESS 0.15mm, APERTURE RATIO 100%) パターン非推奨エリア パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECOMMENDED ON THE HATCHING AREA PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHING AREA. 1.3 ±0.1 (A) AND (B) B 3.97 ±0.1 (0.48) C DISTANCE FROM CONNECTOR OUTLINE TO NAIL PAD 基板パターンレイアウト PCB PATTERN LAYOUT 1.2 ±0.1 TYP.(2) (0.2) 製品輪郭線 回路番号 N CIRCUIT N PART OUTLINE 0.8 ±0.05 回路番号 1 0.625 ±0.1 1.25 ±0.05 4 公差非累積 NON-ACCUMULATIVE A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DOCUMENT STATUS P1 RELEASE DATE 9 2023/02/16 NTS CIRCUIT 1 ANGULAR TOL ± 回路番号 2 CIRCUIT 2 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:40 8 SCALE mm 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) (B) FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 DIMENSION UNITS 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW RIGHT ANGLE SMT PLUG ASSEMBLY TIN-BISMUTH PLATING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/11/24 2017/12/06 DRAWING SERIES A3-SIZE 505567 3 5055670000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 D SHEET NUMBER 2 OF 5 1 A 10 吸着エリア SUCTION AREA 9 7 8 5 6 4 3 2 1 F (0.15) (D) (0.15) (0.15) (1.85) F E E 嵌合状態図 MATED CONNECTORS (A) (7.4) D (4.2) D 嵌合相手 505565シリーズ　　　　 MATE WITH : 505565 SERIES 2 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 10.7 C 9.2 (10.5) (WITH RETAINER) (A) 6.7 (8.4) (WITHOUT RETAINER) (4.2) 6.6 5.35 4.1 2.85 1.9 B C B 極数 CIRCUIT SIZE D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 2 リテーナー : 214528 SERIES RETAINER : 214528 SERIES 2 嵌合相手 214526シリーズ　　　　 MATE WITH : 214526 SERIES A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2023/02/16 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:40 8 ANGULAR TOL 7 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW RIGHT ANGLE SMT PLUG ASSEMBLY TIN-BISMUTH PLATING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/11/24 2017/12/06 DRAWING SERIES A3-SIZE 505567 3 5055670000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 D SHEET NUMBER 3 OF 5 1 A 9 7 8 5 6 引き出し方向 PULL OUT DIRECTION 引き出し方向 PULL OUT DIRECTION F 4 3 ズレ 0.05 MAXIMUM SKEW �12� 2 1 DETAIL X 44mm 幅テープ TAPE WIDTH : 44mm ⑥ REEL 1.5 +0.1 0 R 0.75 0.2 ±0.05 10 32mm 幅テープ TAPE WIDTH : 32mm +0.05 0 F TYP.(2) 24mm 幅テープ TAPE WIDTH : 24mm コネクタ 中心位置 CENTER OF CONNECTOR (22) (2) �F� (120°) 16mm 幅テープ TAPE WIDTH : 16mm 28.5 ±0.1 E (⌀10) 40.5 ±0.1 E Φ380 ±2 (Φ80) DETAIL X TOP TAPE コネクタ CONNECTOR (⌀21) G ±1 (⌀13) "Y" ④ エンボステープ H ±1 1.75 ±0.1 DETAIL "Y" D E ⑤ トップテープ �2� エンボスポケットの中心位置 ⌀ 1.50 +0.1 0 EMBOSSED TAPE D CENTER OF EMBOSSED POCKET 4 ±0.1 累積ピッチ:40±0.2 ACCUMULATIVE PITCH 注記 NOTE 6. 梱包数量：1200個／リール NUMBER OF CONNECTORS : 1200 PCS/REEL. 7. リードテープ長さ LEAD TAPE LENGTH. C 49.4 45.4 20.2 44±0.3 100 MINIMUM 引き出し方向 PULL OUT DIRECTION 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 トップテープ接着部(空エンボス) TOP TAPE BONDED PART.(EMPTY) 37.4 33.4 14.2 32±0.3 トップテープリーダー部 TOP TAPE LEADER PART 400 MINIMUM 部品挿入部 COMPONENT SUPPLIER . 末端部(空部) TAIL PART (EMPTY) 160 MINIMUM 29.4 25.4 11.5 24+0.3 -0.1 8. トップテープの剥離強度はIEC60286-3に準拠 TOP TAPE PEELING FORCE IS DEFINED BY IEC60286-3. B H 1 番号 部品 NO. PART ④ A 16+0.3 -0.1 21.4 17.4 7.5 ⑤ ⑥ TABLE 2 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 材質 MATERIAL トップテープ TOP TAPE ポリエチレン(PE), その他 POLYETHYLENE(PE), ETC リール REEL ポリスチレン(PS) ＜リサイクル材を含む＞ POLYSTYRENE(PS) ＜RECYCLE MATERIAL CONTAINED＞ DOCUMENT STATUS P1 RELEASE DATE 9 DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ポリスチレン(PS) エンボステープ EMBOSSED TAPE POLYSTYRENE(PS) FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 B 極数 CIRCUIT SIZE E F G C 2023/02/16 7 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:40 8 ANGULAR TOL 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW RIGHT ANGLE SMT PLUG ASSEMBLY TIN-BISMUTH PLATING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/11/24 2017/12/06 DRAWING SERIES A3-SIZE 505567 3 5055670000-SD MATERIAL NUMBER CUSTOMER SEE SHEET5 2 GENERAL PSD 000 D SHEET NUMBER 4 OF 5 1 A 10 9 7 8 2 E 3 2 1 F 5055679200 PS 200 シリーズ番号 SERIES NUMBER 505565 214526 リテーナー対応 RETAINER APPLICABLE NOT COMPLIANT COMPLIANT (NATURAL, BLACK, RED, YELLOW, BLUE) 適合リテーナーシリーズ番号 APPLICABLE RETAINER SERIES NUMBER - 214528 製品仕様書 PRODUCT SPECIFICATION 5055650000 PS 000 2145260000-PS PS 000 適合嵌合相手 MATE WITH 4 適合製品及び各種仕様書 APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 梱包仕様書 PACKAGING SPECIFICATION F 5 6 E コネクタ取扱説明書 APPLICATION SPECIFICATION 5055650000-AS PS 000 D D 5 C B 505567**7* 発注番号一覧 ORDER NUMBER LIST ORANGE GREEN BLUE YELLOW RED BLACK 5055671678 5055671578 5055671478 5055671378 5055671278 5055671178 5055671078 5055670978 5055670878 5055670778 5055670678 5055670578 5055670478 5055670378 5055670278 5055671676 5055671576 5055671476 5055671376 5055671276 5055671176 5055671076 5055670976 5055670876 5055670776 5055670676 5055670576 5055670476 5055670376 5055670276 5055671674 5055671574 5055671474 5055671374 5055671274 5055671174 5055671074 5055670974 5055670874 5055670774 5055670674 5055670574 5055670474 5055670374 5055670274 5055671673 5055671573 5055671473 5055671373 5055671273 5055671173 5055671073 5055670973 5055670873 5055670773 5055670673 5055670573 5055670473 5055670373 5055670273 5055671672 5055671572 5055671472 5055671372 5055671272 5055671172 5055671072 5055670972 5055670872 5055670772 5055670672 5055670572 5055670472 5055670372 5055670272 5055671671 5055671571 5055671471 5055671371 5055671271 5055671171 5055671071 5055670971 5055670871 5055670771 5055670671 5055670571 5055670471 5055670371 5055670271 HOUSING COLOR 16 15 14 13 12 11 10 NATURAL (BEIGE) 5055671670 5055671570 5055671470 5055671370 5055671270 5055671170 5055671070 5055670970 5055670870 5055670770 5055670670 5055670570 5055670470 5055670370 5055670270 発注番号：ORDER NUMBER エンボステープ梱包 PACKAGING STYLE: EMBOSSED TAPE AND REEL 9 8 7 6 5 4 3 2 C B 極数 CIRCUIT SIZE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2023/02/16 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:40 8 ANGULAR TOL 7 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW RIGHT ANGLE SMT PLUG ASSEMBLY TIN-BISMUTH PLATING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/11/24 2017/12/06 DRAWING SERIES A3-SIZE 505567 3 5055670000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 D SHEET NUMBER 5 OF 5 1 A