70553-0113

12 11 10 9 7 8 5 6 4 3 2 DIM. "A" MM IN. 2.54 .100 5.08 .200 7.62 .300 10.16 .400 12.70 .500 15.24 .600 17.78 .700 20.32 .800 22.86 .900 25.40 1.000 27.94 1.100 30.48 1.200 33.02 1.300 35.56 1.400 38.10 1.500 40.64 1.600 43.18 1.700 45.72 1.800 48.26 1.900 50.80 2.000 53.34 2.100 55.88 2.200 58.42 2.300 60.96 2.400 CKT. SIZE CORE OUT H CORE OUT CONTINUOUS RIB SEE NOTE 6 G ALTERNATIVE CORING MANUFACTURER'S OPTION SPLIT RIB SEE NOTE 6 SL RIGHT ANGLE W/LATCH & NO PEGS F �13.59� (0.64)/(.025) SQUARE PIN �.535� �8.89� B �.350� (4.32±0.23) .170±.009 (2 CKT.) A �1.02� E ±0.10 TYP. �.040� E 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 DIM. "B" MM IN. 5.33 .210 8.13 .320 10.67 .420 13.21 .520 15.75 .620 18.29 .720 20.83 .820 23.37 .920 25.91 1.020 28.45 1.120 30.99 1.220 33.53 1.320 36.07 1.420 38.61 1.520 41.15 1.620 43.69 1.720 46.23 1.820 48.77 1.920 51.31 2.020 53.85 2.120 56.39 2.220 58.93 2.320 61.47 2.420 64.01 2.520 H G F E TYP. WALL (4.57±0.23) .180±.009 (3-25 CKTS.) �5.08� �.200� �6.99� �.275� (2.79±0.13) .110±.005 (2 CKT.) �0.38� �.015� D 1 D TYP. (3.05±0.13) .120±.005 (3-25 CKTS.) TYP. D �13.21� �.520� �2.54� TYP. 2 CIRCUIT TYP. �.100� C B A �2.54 ±0.08 � NOTES: 1. HEADER MATERIAL: GLASS FILLED POLYESTER; UL 94V-0, COLOR: BLACK PIN MATERIAL: PHOSPHOR BRONZE 2. FINISH: TIN: 3.81 MICROMETERS/150 MICROINCHES MINIMUM TIN PLATE OVERALL OVER NICKEL UNDERPLATE OVERALL 15 GOLD: 0.38 MICROMETERS/15 MICROINCHES MINIMUM GOLD PLATE IN CONTACT AREA 1.91 MICROMETERS/75 MICROINCHES MINIMUM TIN PLATE IN TAIL AREA OVER NICKEL UNDERPLATE OVERALL 30 GOLD: 0.76 MICROMETERS/30 MICROINCHES MINIMUM GOLD PLATE IN CONTACT AREA 1.91 MICROMETERS/75 MICROINCHES MINIMUM TIN PLATE IN TAIL AREA OVER NICKEL UNDERPLATE OVERALL 3. HEADER TO BE USED WITH OPTION "G" 70400 AND 70430 SERIES SL CONNECTORS 4. REFER TO MOLEX PRODUCT SPECIFICATION PS-70541 & PS-70400 5. STANDARD PACKAGING IN TUBES PER PK-70873-0015 OR OPTIONAL PACKAGING IN BAGS PER PK-70873-0535. OPTION PACK NOT AVAILABLE FOR ALL CKT SIZES. 6. ALTERNATIVE RIB, MAY BE SPILT OR CONTINUOUS. EITHER OPTION DOES NOT IMPACT FUNCTION OF THE ASSEMBLY. DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2019/05/14 10 � 1.09 ±0.08 � .100 ±.003 TYP. NON-ACCUM. RECOMMENDED PC BOARD LAYOUT (FOR USE WITH (1.57)/.062 THICK BOARD) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 4:1 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± 0.005 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL 13:29:29 8 3 CIRCUIT B 0.01 ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 9 C .043 ±.003 DIA. TYP. 7 6 5 EC NO: 617172 DRWN: GGUNAGI CHK'D: GJEEVANSURES APPR: ISHWARG INITIAL REVISION: DRWN: AAB APPR: WAZ THIRD ANGLE PROJECTION 4 2019/05/08 2019/05/14 2019/05/14 SALES ASSY, SL RIGHT ANGLE HDR W/LATCH (2.54)/.100 CENTERS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1993/05/13 1993/05/13 DRAWING SERIES C-SIZE 70553 3 SDA-70553-XXXX MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 M SHEET NUMBER 1 OF 3 1 A 12 11 10 CIRCUIT SIZE 9 ENGINEERING NUMBER A-70553 H G 2-10 -0001-0009 11-25 -0010-0024 2-10 -0036-0044 11-25 -0045-0059 2-10 -0106-0114 11-25 -0115-0129 2-10 -0141-0149 11-25 -0150-0164 7 8 MATING AREA FINISH D REF. E ±.010 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (2.67) .105 (2.67) .105 (6.10) .240 (6.10) .240 (6.10) .240 (6.10) .240 (6.10) .240 (6.10) .240 (6.10) .240 (6.10) .240 5 6 PC TAIL AREA FINISH 4 3 2 1 SEE PACK INFORMATION DRAWING PK-70873 15 GOLD TIN -0015 (TUBES) 15 GOLD TIN -0015 (TUBES) TIN TIN -0015 (TUBES) TIN TIN -0015 (TUBES) 30 GOLD TIN -0015 (TUBES) 30 GOLD TIN -0015 (TUBES) 15 GOLD TIN -0015 (TUBES) 15 GOLD TIN -0015 (TUBES) H G 2-10 F F 11-25 CIRCUIT SIZE E D C B ASSEMBLY ITEM NUMBER ASSEMBLY ITEM NUMBER ASSEMBLY ITEM NUMBER ASSEMBLY ITEM NUMBER ASSEMBLY ITEM NUMBER 2 70553-0001 70553-0036 70553-0106 70553-0141 3 70553-0002 70553-0037 70553-0107 70553-0142 4 70553-0003 70553-0038 70553-0108 70553-0143 5 70553-0004 70553-0039 70553-0109 70553-0144 6 70553-0005 70553-0040 70553-0110 70553-0145 7 70553-0006 70553-0041 70553-0111 70553-0146 8 70553-0007 70553-0042 70553-0112 70553-0147 9 70553-0008 70553-0043 70553-0113 70553-0148 10 70553-0009 70553-0044 70553-0114 70553-0149 11 70553-0010 70553-0045 70553-0115 70553-0150 12 70553-0011 70553-0046 70553-0116 70553-0151 13 70553-0012 70553-0047 70553-0117 70553-0152 14 70553-0013 70553-0048 70553-0118 70553-0153 15 70553-0014 70553-0049 70553-0119 70553-0154 16 70553-0015 70553-0050 70553-0120 70553-0155 17 70553-0016 70553-0051 70553-0121 70553-0156 18 70553-0017 70553-0052 70553-01222 70553-0157 19 70553-0018 70553-0053 70553-0123 70553-0158 20 70553-0019 70553-0054 70553-0124 70553-0159 21 70553-0020 70553-0055 70553-0125 70553-0160 22 70553-0021 70553-0056 70553-0126 70553-0161 23 70553-0022 70553-0057 70553-0127 70553-0162 24 70553-0023 70553-0058 70553-0128 70553-0163 25 70553-0024 70553-0059 70553-0129 70553-0164 "X" IN COLUMN UNDER "ASSEMBLY ITEM NUMBER" HEADING DENOTES TOOLING NOT AVAILABLE ASSEMBLY ITEM NUMBER E D C B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 4:1 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) MM A 4 PLACES ± ± 3 PLACES ± ± 0.005 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2019/05/14 10 INCH 0.01 ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 13:29:29 9 8 7 6 5 EC NO: 617172 DRWN: GGUNAGI CHK'D: GJEEVANSURES APPR: ISHWARG INITIAL REVISION: DRWN: AAB APPR: WAZ THIRD ANGLE PROJECTION 4 2019/05/08 2019/05/14 2019/05/14 SALES ASSY, SL RIGHT ANGLE HDR W/LATCH (2.54)/.100 CENTERS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1993/05/13 1993/05/13 DRAWING SERIES C-SIZE 70553 3 SDA-70553-XXXX MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 M SHEET NUMBER 2 OF 3 1 A 12 11 10 9 7 8 H G 5 6 CIRCUIT SIZE ENGINEERING NUMBER A-70553 D REF. E ±.010 MATING AREA FINISH PC TAIL AREA FINISH SEE PACK INFORMATION DRAWING PK-70873 2-10 -5001-5009 (3.30) .130 (6.10) .240 15 GOLD TIN -0535(BAGS) 2-10 -5036-5044 (3.30) .130 (6.10) .240 TIN TIN -0535(BAGS) 2-10 -6001-6009 (3.30) .130 (6.10) .240 15 GOLD TIN -0535(BAGS) 4 3 2 1 H G 2-10 F F CIRCUIT SIZE E D ASSEMBLY ITEM NUMBER ASSEMBLY ITEM NUMBER 2 X 70553-5001 3 X 70553-5002 4 X 70553-5003 5 X 70553-5004 X 70553-5039 6 X 70553-5005 X 70553-5040 7 X 70553-5006 X 70553-5041 8 X 70553-5007 X 70553-5042 9 X 70553-5008 X 70553-5043 10 X 70553-5009 X 70553-5044 ASSEMBLY ITEM NUMBER ASSEMBLY ITEM NUMBER ASSEMBLY ITEM NUMBER ASSEMBLY ITEM NUMBER 70553-0036 X 70553-5037 E 70553-6002 70553-5038 D "X" IN COLUMN UNDER "ASSEMBLY ITEM NUMBER" HEADING DENOTES TOOLING NOT AVAILABLE C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 4:1 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) MM A 4 PLACES ± ± 3 PLACES ± ± 0.005 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2019/05/14 10 INCH 0.01 ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 13:29:29 9 8 7 6 5 EC NO: 617172 DRWN: GGUNAGI CHK'D: GJEEVANSURES APPR: ISHWARG INITIAL REVISION: DRWN: AAB APPR: WAZ THIRD ANGLE PROJECTION 4 2019/05/08 2019/05/14 2019/05/14 SALES ASSY, SL RIGHT ANGLE HDR W/LATCH (2.54)/.100 CENTERS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1993/05/13 1993/05/13 DRAWING SERIES C-SIZE 70553 3 SDA-70553-XXXX MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 M SHEET NUMBER 3 OF 3 1 A