D050505T-2W

D_T-2W Series 2W, FIXED INPUT, ISOLATED & UNREGULATED TWIN OUTPUT ULTRAMINIATURE SMD PACKAGE multi-country patent protection RoHS FEATURES Efficiency up to 85% Small Footprint SMD Package Twin Independent Output Industry Standard Pinout No Heat sink Required 1KVDC Isolation High Power Density Temperature Range: -40°C to +85°C No External Component Required Internal SMD construction RoHS Compliance PRODUCT PROGRAM I nput P art Number D050505T-2W D050909T-2W * D051212T-2W * D051515T-2W * D120505T-2W D120909T-2W * D121212T-2W * D121515T-2W * 12 10.8-13.2 5 4.5-5.5 Voltage (VDC) Nominal Range Voltage (VDC) 5 9 12 15 5 9 12 15 Output Current (mA) Max 200 112 84 67 200 112 84 67 Min 20 12 9 7 20 12 9 7 82 83 84 85 82 83 84 85 SMD SMD SMD SMD SMD SMD SMD SMD Efficiency (%, Typ) Package Style APPLICATIONS The D_T-2W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is fixed (voltage variation ≤±10%); 2) Where isolation is necessary between input and output (isolation voltage ≤ 1000VDC); 3) Where the regulation of the output voltage and the output ripple and noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits and IGBT power device driven circuits, etc. Isolation capacitance Isolation resistance Isolation voltage Designing. Note: The D_T-1W series also are available in our company. ISOLATION SPECIFICATIONS Item Test condition Min Typ Max Units VDC Tested for 1 minute and 1 mA max(Vin/Vout) 1000 Tested for 1 minute and 1 mA max(Vo1/Vo2) 1000 Test at 500VDC(Vin/Vout) Test at 500VDC(Vo1/Vo2) (Vin/Vout) (Vo1/Vo2) 1000 1000 60 60 pF MΩ OUTPUT SPECIFICATIONS MODEL SELECTION D050505T-2W Rated Power Package Style T he 2nd Output Voltage The 1st Output Voltage Input Voltage Product Series Item Output power Line regulation For Vin change of 1% 10% to 100% full load(5V Output) Load regulation 10% to 100% full load(9V Output) 10% to 100% full load(12V Output) 10% to 100% full load(15V Output) Output voltage accuracy S ee tolerance envelope graph MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Test condition Min 0.2 Typ Max 2 ±1.2 Units W 12.8 8.3 6.8 6.0 15 10 10 10 % Temperature drift Ripple & Noise Switching frequency 100% full load 20MHz Bandwidth Full load, nominal input 75 100 0.03 150 %/°C mVp-p KHz Note: 1. All specifications measured at TA=25° C, humidity220 o C ) 26 0 C 1 0 S ec M ax o 22 0o C o Vin (VDC) 5 12 - Cin (uF) 4.7 2.2 - Vout (VDC) 5 9 12 15 Cout (uF) 4.7 2.2 1 0.74 OUTLINE DIMENSIONS& RECOMMENDED FOOTPRINT First Angle Projection 6 .0 0 (0 .2 3 6 ) 5 .7 5 (0 .2 2 6 ) 2.75 (0.10 8) 1.27 (0.05 0) 0.25 (0.01 0) It’s not recommended to connect any external capacitor in the application field with less than 0.5 watt output. RECOMMENDED FOOTPRINT Top v iew,grid :2.54mm(0 .1inch) Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is 14 13 12 1 7 .7 8 ( 0 .7 0 0 ) 1 2 .7 0 ( 0 .5 0 0 ) 10 9 8 1413 12 10 9 8 connected to the input or output end in series (Figure2). Vo1 Vin REG 0V1 2.0 DC 123 567 GND DC REG Vo2 0V2 123 567 15.24 (0.600) 17.78 (0.700) 1.0 Vo1 0V1 (0.039) Vin DC GND DC REG Vo2 0V2 A 0.25 A 1.30 0.13 (0.051 0.005 ) 0.50 (0.02 0) 。 FOOTPRINT DETAILS Function GND Vin 0V1 Vo1 Vo2 9 10 0V2 Others NC NC:No connection 1 2 5 6 (Figure2) Overload Protection Under normal operating conditions, the output circuit of these products has no protection against overload. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. No parallel connection or plug and play. 5. 00 Note: Unit:mm(inch) Pin sectio n:0.60*0.25mm(0.024 *0.010inch) Pin sectio n tolera nces: 0.10mm( 0.004inch) General tolera nces: 0.1 5mm( 0.006 in ch) MORNSUN reserves the copyright Specifications subject to change without notice. D_T-2W A/0-2008 Page 2 of 2