T1130B

Active Single channel Analog signal Isolation barrier (Iin & Iout) T11/12/21/22_B APPLICATIONS Analog signal isolating barrier, is a signal conditioner with electrical insulation between input and output, which can receive the standard or non-standard analog signal input from the scene, and transmit a standard output signal to the control room or DCS, to get three-port isolated among power supply, input and output. It is designed for translating signals of apparatus in hazardous area, isolating and transforming these signals into standard signals which can be accepted by industry computer, DCS, PLC, or user-specified special signals. It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. We adopt high efficiency magnetism and electricity isolated technology to achieve signal isolation, with characteristics of high output accuracy, good linearity and low temperature drift. Output Data Input Data Isolation Power Output Data Power Supply Data PRODUCT PROGRAM Part Number T1133B T1130B T2233B T2230B P ower Supply 24V 24V 24V 24V I nput 4-20mA 4-20mA 0-20mA 0-20mA Output 4-20mA 4-20mA 0-20mA 0-20mA Isolation Channels Power Output 24V NONE 24V NONE 1 1 1 1 Note: We could also offer customer design for special input and output. ELECTRICAL CHARACTERISTICS Power Supply Power Dissipation Power Protection Output Voltage Output Current Input Signal Input Impedance Overload Output Signal Load (Nominal Power Supply)±5% ≤2W Reverse protection (Nominal)±10% ≤25mA See above Input 20mA with voltage drop about 250mV ≤300mA See above ≤500Ω(At Output =20mA) FEATURES ● Three port Isolation(input, output, power supply) ● High accuracy (0.1% F.S.) ● High linearity (0.1% F.S.) ● I solation voltage(2500VDC/60S) ● High frequency response(15KHz) ● Low temperature drift(35PPM/ ℃) ● I ndustry class(Operation temp.: -25℃ to +71℃) ● High reliability(MTBF＞500,000 hours) TRANSMISSION CHARACTERISTICS Offset Gain Error Temperature Drift 0.1%F.S. 0.1%F.S. 0.0035%F.S./ ℃ (-25℃ to +71℃) ISOLATION CHARACTERISTICS Galvanic Isolation Isolation Voltage Three port Isolation(input, output, power supply) 2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%) 100M Ω， 500VDC(Among signal input ,signal output, power supply and isolation power output) MODEL SELECTION Insulation Resistance T XXXXB Package style Isolation power output Power supply Output Input Isolation amplifier OTHER CHARACTERISTICS Ambient temperature P ackage S afety Class EMC compliance MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Operation temperature:-25℃ t o +71℃ Transport and Storage temperature:-50℃ t o +105℃ 35mm DIN-rail package IP20(IEC60529 / EN60529) GB/T 18268(IEC61326-1) About 60g No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded W eight Application environment Note: 1 .All specifications measured at TA=25° C, humidity