FRF1060

MOSPEC Switchmode Full Plastic Dual Fast Recovery Power Rectifiers Designed for use in switching power supplies. inverters and as free wheeling diodes. These state-of-the-art devices have the following features: ＊Glass Passivated chip junctions ＊Low Reverse Leakage Current ＊Fast Switching for High Efficiency ＊150℃ Operating Junction Temperature ＊Low Forward Voltage , High Current Capability ＊Plastic Material used Carries Underwriters Laboratory FRF1030 Thru FRF1060 FAST RECOVERY RECTIFIERS 10 AMPERES 30-600 VOLTS Flammability Classification 94V-O Plating pb free is indicated by box ITO-220AB MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=125℃ Per Total Device Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz,TC=125℃) Symbol 30 VRRM VRWM VR VR(RMS) IF(AV) 300 40 FRF10 50 500 60 600 Unit 400 V 210 280 5.0 10 10 350 420 V A DIM MILLIMETERS MIN MAX 15.05 15.15 13.35 13.45 10.00 10.10 6.55 6.65 2.65 2.75 1.55 1.65 1.15 1.25 0.55 0.65 2.50 2.60 3.00 3.20 1.10 1.20 0.55 0.65 4.40 4.60 1.15 1.25 2.65 2.75 3.35 3.45 3.15 3.25 IFM A Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Operating and Storage Junction Temperature Range IFSM 100 A TJ , Tstg -65 to +150 ℃ ELECTRIAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage ( IF =5.0 Amp TC = 25℃) Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) Reverse Recovery Time ( IF = 0.5 A, IR =1.0 , Irr =0.25 A ) Typical Junction Capacitance (Reverse Voltage of 4 volts & f=1 MHz) Symbol 30 VF 40 1.3 FRF10 50 60 V Unit A B C D E F G H I J K L M N P O Q IR 5.0 100 250 90 uA Trr CP ns PF FRF1030 Thru FRF1060 FIG-1 TYPICAL FORWARD CHARACTERISITICS AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-3 FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE FORWARD VOLTAGE (Volts) FIG-2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (uA.) JUNCTION CAPACITANCE (PF) REVERSE VOLTAGE (Volts.) FIG-5PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT (Amp.) PERCENT OF PEAK REVERSE VOLTAGE (﹪) NUMBER OF CYCLES AT 60 Hz Set time base for 20/50 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram