FRF1605

MOSPEC Switchmode Full Plastic Dual Fast Recovery Power Rectifiers Designed for use in switching power supplies. inverters and as free wheeling diodes. These state-of-the-art devices have the following features: ＊Glass Passivated chip junctions ＊Low Reverse Leakage Current ＊Fast Switching for High Efficiency ＊150℃ Operating Junction Temperature ＊Low Forward Voltage , High Current Capability ＊Plastic Material used Carries Underwriters Laboratory FRF1605 Thru FRF1620 FAST RECOVERY RECTIFIERS 16 AMPERES 50-200 VOLTS Flammability Classification 94V-O Plating pb free is indicated by box ITO-220AB MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=125℃ Per Total Device Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz,TC=125℃) Symbol 05 VRRM VRWM VR VR(RMS) IF(AV) 50 10 FRF16 15 150 20 200 Unit 100 V 35 70 105 140 V 8.0 16 16 A DIM MILLIMETERS MIN MAX 15.05 15.15 13.35 13.45 10.00 10.10 6.55 6.65 2.65 2.75 1.55 1.65 1.15 1.25 0.55 0.65 2.50 2.60 3.00 3.20 1.10 1.20 0.55 0.65 4.40 4.60 1.15 1.25 2.65 2.75 3.35 3.45 3.15 3.25 IFM IFSM A Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Operating and Storage Junction Temperature Range 150 A TJ , Tstg -65 to +150 ℃ ELECTRIAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage ( IF =8.0 Amp TC = 25℃) Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) Reverse Recovery Time ( IF = 0.5 A, IR =1.0 , Irr =0.25 A ) Typical Junction Capacitance (Reverse Voltage of 4 volts & f=1 MHz) Symbol 05 VF 10 1.3 FRF16 15 20 V Unit A B C D E F G H I J K L M N P O Q IR 10 200 150 uA Trr CP ns 120 PF FRF1605 Thru FRF1620 FIG-1 TYPICAL FORWARD CHARACTERISITICS AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-3 FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE FORWARD VOLTAGE (Volts) FIG-2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (uA.) JUNCTION CAPACITANCE (PF) REVERSE VOLTAGE (Volts.) FIG-5PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT (Amp.) PERCENT OF PEAK REVERSE VOLTAGE (﹪) NUMBER OF CYCLES AT 60 Hz Set time base for 20/50 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram