EVQ3362-J-00A
Single-String, 3V VIN-MIN, 36V VOUT Boost
LED Driver Evaluation Board, AEC-Q100
DESCRIPTION
FEATURES
The EVQ3362-J-00A is designed for the
MPQ3362, a boost LED driver that is wellsuited for low-to-high current boost applications.
The device’s low 0.2V feedback voltage offers
higher efficiency in white LED driver
applications.
The MPQ3362 regulates the output voltage up
to 36V, with up to 95% efficiency. Current mode
regulation
and
external
compensation
components allow the MPQ3362 control loop to
be optimized across a wide input voltage range.
The MPQ3362 supports analog dimming and
PWM dimming on the same pin (the EN/DIM
pin). A 5kHz input dimming
frequency initiates analog dimming.
3V to 36V Input Voltage Range
4A Peak Current Limit
0.3µA Shutdown Current
Low 200mV Feedback Voltage
Configurable 200kHz to 2.2MHz Switching
Frequency
Internal 80mΩ, 40V Power Switch
High Efficiency
Analog and PWM Dimming
Under-Voltage Lockout (UVLO)
Open/Short LED Protection
Short FB Protection
Soft Start
Thermal Shutdown
Available in a TSOT23-8 Package
AEC-Q100 Grade 1
Soft start, cycle-by-cycle current limiting, and
VIN under-voltage lockout (UVLO) prevent the
device from overstress or damage. This
protects the sensitive external circuitry during
start-up, and under overload conditions.
APPLICATIONS
The MPQ3362 is available in a TSOT23-8
package.
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
registered trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
ELECTRICAL SPECIFICATIONS
Parameter
Input voltage
Output voltage
LED string
LED current
Symbol
Value
Units
VIN
3 to 36
V
VOUT
很抱歉,暂时无法提供与“EVQ3362-J-00A”相匹配的价格&库存,您可以联系我们找货
免费人工找货