MP8102DJ-LF-Z

MP8102 Ultra Low Power 1.8V, 600kHz Op Amp DESCRIPTION FEATURES The MP8102 is a rail-to-rail output, operational amplifier in a TSOT-23 package. This amplifier provides 600KHz bandwidth while consuming an incredibly low 7.5µA of supply current. The MP8102 can operate with a single supply voltage as low as 1.8V.         Single Supply Operation: 1.8V to 5.5V TSOT23-5 Package 600KHz –3dB Bandwidth 7.5µA Supply Current Rail-to-Rail Output Unity-Gain Stable Input Common Mode to Ground Drives Up to 1000pF of Capacitive Loads APPLICATIONS       Portable Equipment PDAs Pagers Cordless Phones Handheld GPS Consumer Electronics All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 1 MP8101 – ULTRA LOW POWER, 1.8V, 400kHz OP AMP ORDERING INFORMATION Part Number* Package TSOT23-5 MP8102DJ Top Marking See Below * For Tape & Reel, add suffix –Z (e.g. MP8102DJ–Z); For RoHS, compliant packaging, add suffix –LF (e.g. MP8102DJ–LF–Z). TOP MARKING H6: product code of MP8102DJ; Y: year code; W: week code: PACKAGE REFERENCE ABSOLUTE MAXIMUM RATINGS (1) Thermal Resistance (3) Supply Voltage (V+ to V-) .........................+6.0V Differential Input Voltage (VIN+ – VIN–) ........+6.0V Input Voltage (VIN+ – VIN–).. VIN+ + 0.3V, VIN– – 0.3V Junction Temperature .............................. 150C TSOT23-5 ............................. 220 .... 110 .. C/W Recommended Operating Conditions (2) θJA θJC Notes: 1) Exceeding these ratings may damage the device. 2) The device is not guaranteed to function outside of its operating conditions. 3) Measured on approximately 1” square of 1 oz copper. Supply Voltage .......................... +1.8V to +5.5V Operating Temperature............. –40C to +85C MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 2 MP8102 – ULTRA LOW POWER, 1.8V, 600kHZ OP AMP ELECTRICAL CHARACTERISTICS V+ = +5V, V– = 0V, VCM = V+/2, RL = 10kΩ, TA = +25C, unless otherwise noted. Parameter Symbol Input Offset Voltage Input Offset Voltage Temp Coefficient Input Bias Current (4) Input Offset Current (4) Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Large Signal Voltage Gain Maximum Output Voltage Swing Minimum Output Voltage Swing Gain-Bandwidth Product (4) Min Typ Max Units –5 1 +5 mV VOS IB IOS VCM CMRR > 60dB CMRR 0 < VCM < 3.5V PSRR AVOL Supply Voltage change of 1.0V RL = 100kΩ, VOUT = 5.0 Peak to Peak 15 µV/C 2 0.2 pA pA V 0 60 3.8 82 dB 80 dB 88 dB VOUT RL = 10kΩ V+ – 23mV V VOUT RL = 10kΩ V– + 19mV V 200 KHz 600 KHz 0.1 V/µs –20 20 7.5 mA mA µA GBW –3dB Bandwidth (4) BW Slew Rate (4) SR Short Circuit Current ISC Supply Current Condition RL = 200kΩ,CL = 2pF, VOUT = 0 AV = 1, CL = 2pF, RL = 1MΩ AV = 1, CL = 2pF, RL = 1MΩ Source Sink No Load 10 Note: 4) Guaranteed by design. MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 3 MP8102 – ULTRA LOW POWER, 1.8V, 600kHZ OP AMP PIN FUNCTIONS Pin # Name Description 1 2 OUT V+ Output. Supply Voltage. 3 4 5 IN+ INV- Non-Inverting Input. Inverting Input. Ground or Supply Return Pin. TEST CIRCUITS Figure 1—AC Test Circuit MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 4 MP8102 – ULTRA LOW POWER, 1.8V, 600kHZ OP AMP TEST CIRCUITS (continued) Figure 2—Positive Power Supply Rejection Ratio Measurement MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 5 MP8102 – ULTRA LOW POWER, 1.8V, 600kHZ OP AMP TYPICAL PERFORMANCE CHARACTERISTICS TA = +25C, unless otherwise noted. MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 6 MP8102 – ULTRA LOW POWER, 1.8V, 600kHZ OP AMP TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25C, unless otherwise noted. MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 7 MP8102 – ULTRA LOW POWER, 1.8V, 600kHZ OP AMP TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25C, unless otherwise noted. MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 8 MP8102 – ULTRA LOW POWER, 1.8V, 600kHZ OP AMP TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25C, unless otherwise noted. MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 9 MP8102 – ULTRA LOW POWER, 1.8V, 600kHZ OP AMP APPLICATION INFORMATION Power Supply Bypassing Regular supply bypassing techniques are recommended. A 10µF capacitor in parallel with a 0.1µF capacitor on both the positive and negative supplies is ideal. For the best performance, all bypassing capacitors should be located as close to the op amp as possible and all capacitors should be low ESL (Equivalent Series Inductance) and low ESR (Equivalent Series Resistance). Surface mount ceramic capacitors are ideal. PACKAGE INFORMATION TSOT23-5 NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. MP8102 Rev. 1.0 3/8/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 10