MPL-AT2512-1R0

MPL-AT2512-1R0 Low-Profile Molded Inductor 1.0µH APPLICATIONS • • • • • • ELECTRICAL CHARACTERISTICS FEATURES • • • • • • • • • Battery-powered devices High switching frequency SMPS IoT Wearable Portable devices Input filters Parameter Size 2.5mmx2.0mmx1.2mm Low Profile Low Audible Noise Molded Construction Soft Saturation Stable Over High Temperatures Low DCR Max Operating Temp +125°C RoHS/REACH-Compliant, Halogen-Free (1) Inductance Resistance Resistance MAX Rated Current (2) Saturation Current 25°C (3) Saturation Current 100°C (4) Resonance Frequency L RDC RDC MAX IR ISAT 25°C ISAT 100°C fr ±20% Typ Max Typ Typ Typ Typ Value Unit 1 33 40 4.1 5.2 5.2 65 µH mΩ mΩ A A A MHz GENERAL SPECIFICATIONS (1) (2) Inductance Measured at 100kHz, 100mA Rated Current Rated current will cause the coil temperature rise ΔT of 40K IR measured with the inductor soldered in a single-layer PCB. Copper layer thickness 35µm Cu / PCB size 30x50mm. Temperature behavior dependent on circuit design, PCB layout, proximity to other components, and trace dimensions and thickness. (3) Saturation current will cause L to drop from 30% at 25°C ambient temperature (4) Saturation current will cause L to drop from 30% at 100°C ambient temperature Saturation Current 25°C Saturation Current 100°C Temperature Test Condition Operating Condition Storage Condition Electrical specifications measured at 25°C, 35% RH if not given differently Operating temperature: -40°C to +125°C (including temp rise) Should not exceed +125°C under worst-case operation conditions Tape and Reel packaging: -10°C to +40°C Humidity: