MM15TAN

MM Series 5x7 mm, 5 Volt, HCMOS/TTL, Surface Mount Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M1 PRODUCT SERIES. • • • AT-strip crystal in a miniature ceramic surface mount package. TTL and HCMOS compatible Tri-state output is optional DENOTES PIN 1 NOTE: A capacitor of value 0.01 µF or greater between Vdd and Ground is recommended. Tri-state Control Logic Pin 1 high or floating: clock signal output. Pin 1 low: output disabled to high impedance. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 03-13-07 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.