!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
C41E2.pdf 03.4.16
High Voltage Ceramic Capacitors DC10-40kV
HIGH VOLTAGE
CERAMIC
CAPACITORS
Murata
Manufacturing Co., Ltd.
Cat.No.C41E-2
rating,
soldering,
mounting
and handling)
in this
catalogto
toprevent
preventsmoking
smokingand/or
and/orburning,
burning,etc.
etc.
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage operating,
and operating,
rating,
soldering
and mounting,
handling)
in PDF
this catalog
!Note •Please
C41E2.pdf 03.4.16
you are
requested
to detailed
approve specifications.
our product specifications
to transact
theour
approval
sheet
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space for
Therefore, or
please
approve
product
specification
orspecificaions
transact the approval
sheet for product specification before ordering.
CONTENTS
Part Numbering
1
3
2
Radial Lead Type DHR Series (DC10-15kV)
3
Specifications and Test Methods
5
Typical Characteristics Data/Packaging
7
DHR Series !Caution/Notice
2
1
8
Mold Type DHS N4700 Series (DC10-40kV)
10
Typical Characteristics Data / Specifications and Test Methods
12
Mold Type DHS Z5V Series (DC20-40kV)
13
Typical Characteristics Data
14
Specifications and Test Methods
15
DHS Series !Caution and Notice
16
ISO9000 Certifications
18
Recycled Paper
2
3
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
o Part Numbering
High Voltage Ceramic Capacitors (over 10kV)
DH R
(Global Part Number)
q
B
B3
4A
101 M
2B
w e
r
t
u i
y
yCapacitance Tolerance
qProduct ID
Product ID
DH
High Voltage Ceramic Capacitors (over 10kV)
wSeries Category
Code
Contents
R
Radial Type
S
Mold Type
T20%
Z
W80%, Y20%
2B
Lead Type
Straight Long
Cap. Change
or Temp. Coeff.
Temp.
Range
Code
Body Diameter
C2
20mm
B
T10%
Y25 to W85D
D2
24mm
Z5V
W22%, Y82%
W10 to W85D
H2
30mm
L2
38mm
N2
43mm
R2
52mm
T2
60mm
Rated Voltage
CX
20mm
4A
DC10kV
DX
24mm
4B
DC12kV
HX
30mm
4C
DC15kV
LX
38mm
4D
DC20kV
NX
43mm
4F
DC30kV
RX
52mm
4G
DC40kV
TX
60mm
N4700
Y4700T1000ppm/D W20 to W85D
rRated Voltage
Code
9.5mm
ø0.65mm
12.7mm
ø0.8mm
uBody Diameter and Terminal Type (DHS Series)
F4
ZM
Lead Spacing Lead Diameter
2F
B3
4E
tCapacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two numbers.
If there is a decimal point, it is expressed by the capital letter "R".
In this case, all figures are significant digits.
2
T10%
M
Code
eTemperature Characteristics
Temp.
Char.
Capacitance Tolerance
K
uLead Type (DHR Series)
First three digits of part number (qProduct ID and wSeries Category)
express "Series Name".
Code
Code
Terminal Type
ISO M4, P0.7
Tapped Holes
(Metric Screw Thread)
No.8-32, NC-2B
Tapped Holes
(Inch Screw Thread)
iPackaging
Code
Packaging
B
Bulk
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
High Voltage Ceramic Capacitors DC10-40kV
1
Radial Lead Type DHR Series (DC10-15kV)
D max.
T max.
D+1.0 max.
■ Features
35.0 min.
4.0 max.
1. Small size
2. Excellent heat-proof, humidity-proof and highdielectric strength voltage.
3. Coated with flame-retardant epoxy resin.
φd±0.05
■ Applications
1. Color TV doublers and triplers
2. High voltage DC power supplies (PPCs, X-ray
apparatus, air cleaner, lasers, etc.)
3. Tuning capacitor in focus circuit for display
2
F±
(in mm)
■ Marking
Temp. Char.
ZM
B
ø8mm
101
10K
101
10K
ø9mm and 10mm
221K
10K•
221M
10K
ø11mm to 14mm
ZM
471K
10K
B
471M
10K
ø15mm to 18mm
102KZ
10K
0050
102MB
10K
0050
Nominal body dia.
Omitted
Nominal body dia. ø8mm
Nominal body dia. ø9 and 10mm
Temperature
Characteristics Nominal body dia. ø11 to 14mm
Marked with • (dot)
Marked with code.
Marked with Z.
Nominal body dia. ø15mm min.
Nominal Capacitance
Capacitance Tolerance
Rated Voltage
Manufacturer's Identification
Omitted
Marked with code.
Under 100pF : Actual value, 100pF and over : Marked with 3 figures.
Marked with code, omitted for nominal body diameter ø8mm and under.
Marked with code.
Marked with
, omitted for nominal body diameter ø14mm and under.
Abbreviation, omitted for nominal body diameter ø14mm and under.
Manufactured Date
(Ex.) 0 0 5 0
1
2
3
1 : Last numeral in year
3 : Fix No.
2 : Number in the month
3
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
1
ZM Characteristics
Rated Voltage
(kV)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Lead Dia. ød
(mm)
DHR4E4A101K2BB
DC10
100 +10, -10%
8.0
9.5
7.0
0.65
DHR4E4A151K2BB
DC10
150 +10, -10%
8.0
9.5
7.0
0.65
DHR4E4A221K2BB
DC10
220 +10, -10%
9.0
9.5
7.0
0.65
DHR4E4A331K2BB
DC10
330 +10,-10%
10.0
9.5
7.0
0.65
DHR4E4A471K2BB
DC10
470 +10, -10%
12.0
9.5
7.0
0.65
DHR4E4A681K2BB
DC10
680 +10, -10%
13.0
9.5
7.0
0.65
DHR4E4A102K2BB
DC10
1000 +10, -10%
15.0
9.5
7.0
0.65
DHR4E4B101K2BB
DC12
100 +10, -10%
8.0
9.5
7.3
0.65
DHR4E4B151K2BB
DC12
150 +10, -10%
9.0
9.5
7.3
0.65
DHR4E4B221K2BB
DC12
220 +10, -10%
9.0
9.5
7.3
0.65
DHR4E4B331K2BB
DC12
330 +10, -10%
11.0
9.5
7.3
0.65
DHR4E4B471K2BB
DC12
470 +10, -10%
12.0
9.5
7.3
0.65
DHR4E4B681K2BB
DC12
680 +10, -10%
14.0
9.5
7.3
0.65
DHR4E4B102K2BB
DC12
1000 +10, -10%
16.0
9.5
7.3
0.65
DHR4E4C101K2BB
DC15
100 +10, -10%
8.0
9.5
8.2
0.65
DHR4E4C151K2BB
DC15
150 +10, -10%
9.0
9.5
8.2
0.65
DHR4E4C221K2BB
DC15
220 +10, -10%
10.0
9.5
8.2
0.65
DHR4E4C331K2BB
DC15
330 +10, -10%
12.0
9.5
8.2
0.65
DHR4E4C471K2BB
DC15
470 +10, -10%
13.0
9.5
8.2
0.65
DHR4E4C681K2BB
DC15
680 +10, -10%
15.0
9.5
8.2
0.65
DHR4E4C102K2FB
DC15
1000 +10, -10%
18.0
12.7
8.2
0.8
Rated Voltage
(kV)
Capacitance
(pF)
Body Dia. D
(mm)
Lead Spacing F
(mm)
Body Thickness T
(mm)
Lead Dia. ød
(mm)
DHRB34A101M2BB
DC10
100 +20, -20%
8.0
9.5
7.0
0.65
DHRB34A151M2BB
DC10
150 +20, -20%
8.0
9.5
7.0
0.65
DHRB34A221M2BB
DC10
220 +20, -20%
9.0
9.5
7.0
0.65
DHRB34A331M2BB
DC10
330 +20, -20%
10.0
9.5
7.0
0.65
DHRB34A471M2BB
DC10
470 +20, -20%
12.0
9.5
7.0
0.65
DHRB34A681M2BB
DC10
680 +20, -20%
13.0
9.5
7.0
0.65
DHRB34A102M2BB
DC10
1000 +20, -20%
15.0
9.5
7.0
0.65
DHRB34B101M2BB
DC12
100 +20, -20%
8.0
9.5
7.7
0.65
DHRB34B151M2BB
DC12
150 +20, -20%
9.0
9.5
7.5
0.65
DHRB34B221M2BB
DC12
220 +20, -20%
9.0
9.5
7.5
0.65
DHRB34B331M2BB
DC12
330 +20, -20%
11.0
9.5
7.5
0.65
DHRB34B471M2BB
DC12
470 +20, -20%
12.0
9.5
7.5
0.65
DHRB34B681M2BB
DC12
680 +20, -20%
14.0
9.5
7.5
0.65
DHRB34B102M2BB
DC12
1000 +20, -20%
16.0
9.5
7.5
0.65
DHRB34C101M2BB
DC15
100 +20, -20%
8.0
9.5
8.5
0.65
DHRB34C151M2BB
DC15
150 +20, -20%
9.0
9.5
8.2
0.65
DHRB34C221M2BB
DC15
220 +20, -20%
10.0
9.5
8.2
0.65
DHRB34C331M2BB
DC15
330 +20, -20%
12.0
9.5
8.2
0.65
DHRB34C471M2BB
DC15
470 +20, -20%
13.0
9.5
8.2
0.65
DHRB34C681M2BB
DC15
680 +20, -20%
15.0
9.5
8.2
0.65
DHRB34C102M2FB
DC15
1000 +20, -20%
18.0
12.7
8.2
0.8
Part Number
B Characteristics
Part Number
4
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
Specifications and Test Methods
No.
Item
Specifications
1
Operating Temperature Range
-25 to +100˚C
2
Capacitance
Within the specified tolerance.
3
Dissipation Factor (D.F.)
4
Insulation
Resistance (I.R.)
5
ZM
B
7
8
9
—
1.0% max.
2.5% max.
Between
Lead Wires
No failure.
The capacitor should not be damaged when DC voltage of
150% of the rated voltage is applied between the lead wires for
60±5 sec. in insulating liquid or gas.
(Charge/Discharge currentV50mA)
No failure.
The capacitor is placed in the container with
metal balls of diameter 1mm so that each
lead wire, shortcircuited, is kept
approximately 2mm off the metal balls as
shown in the figure at right, and DC voltage
of 3kV is applied for 10 sec. between
capacitor lead wires and metal balls.
(Charge/Discharge currentV50mA)
Temperature Characteristics
Humidity
(Under
Steady
State)
Life
Same condition as capacitance.
The insulation resistance should be measured with DC1000V
within 60±5 sec. of charging.
Dielectric
Strength
Soldering Effect
The capacitance should be measured at 20°C with 1±0.2kHz
and AC 5V(r.m.s.) max.
10000MΩ min.
Temp. Char.
6
Testing Method
Between
Lead Wires
Body Insulation
ZM
B
Temp. Coefficient or
Max. Cap. Change
-4700±1000ppm/˚C
±10%
Appearance
No marked defect.
Capacitance
Change
Within ±10%
Dielectric Strength
(Between
Lead Wires)
No failure.
Appearance
No marked defect.
Capacitance
Change
Within ±10%
D.F.
ZM
B
I.R.
5000MΩ min.
Dielectric Strength
(Between
Lead Wires)
No failure.
Appearance
No marked defect.
Capacitance
Change
Within ±10%
D.F.
ZM
B
I.R.
5000MΩ min.
Dielectric Strength
(Between
Lead Wires)
No failure
1
1.5% max.
4.0% max.
1.5% max.
4.0% max.
Approx. 2mm
Metal balls
The capacitance measurement should be made at each step
specified in table.
Capacitance change from the value of step 3 should not
exceed the limit specified.
Step
Char.
ZM
B
1
2
3
4
5
—
20±2˚C
—
-25±3˚C
20±2˚C
20±2˚C
85±2˚C
85±2˚C
20±2˚C
20±2˚C
The lead wires should be immersed into the melted solder of
350±10˚C up to about 1.5 to 2.0mm from the main body for
3.5±0.5 sec.
Post-treatment: Capacitor should be stored for 24±2 hrs. at
*room condition.
Set the capacitor for 240±8 hrs. at 40±2˚C in 90 to 95% relative
humidity.
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
*room condition.
Apply a DC voltage of 125% of the rated voltage for 1000+48
-0
hrs. in silicon oil at 85±2˚C.
Post-treatment: Capacitor should be stored for 24±2 hrs. at
*room condition.
(Charge/Discharge currentV50mA)
(Note) Tests for Dielectric Strength (between lead wires), Charge Discharge Test, Humidity, Temperature Cycle and Life should be performed with
specimens having molded resin (MR1023C : made by Murata) extending over 3mm on all the surface.
* "room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
5
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
Specifications and Test Methods
1
Continued from the preceding page.
No.
10
Item
Specifications
Appearance
No marked defect.
Capacitance
Change
Within ±10%
D.F.
ZM
B
I.R.
5000MΩ min.
1.5% max.
4.0% max.
Testing Method
Charge discharge test should be measured in the following test
circuit and cycle.
Applied voltage : Rated voltage
Cycle time : 20000 cycle
Post-treatment : Capacitor should be stored for 4 hrs. at *room
condition.
Charge
Discharge
Test
Charge
SW
R1
Discharge
CX
C0
E
Dielectric Strength
(Between
Lead Wires)
1
2
1
2
R2
(sec.)
No failure.
Cx : specimen
R1 : circuit protective resistor (300kΩ)
.
C0 : supplied energy for Cx. C0 =.10Cx
R2 : current limitting resistor (E/10Ω)
E : direct-current voltage source
11
Temperature
Cycle
Appearance
No marked defect.
Capacitance
Change
Within ±10%
D.F.
ZM
B
I.R.
5000MΩ min.
Dielectric Strength
(Between
Lead Wires)
No failure.
1.5% max.
4.0% max.
12
Lead wire should not be cut off.
Capacitor should not be broken.
Solderability of Leads
-30˚C
30
(min)
Bending
13
+100˚C
30
Pull
Strength
of Lead
Temperature cycle should be measured in the following test.
Cycle time : 5 cycle
Post-treatment : Capacitor should be stored for 4 hrs. at *room
condition.
Lead wire should be soldered with
uniform coating on the axial direction
3 of the circumferential direction.
over –
4
As shown in the figure at right, fix the body of the
capacitor and apply a tensile weight gradually to
each lead wire in the radial direction of the
capacitor up to 10N and keep it for 10±1 sec.
W
Each lead wire should be subjected to 5N of weight and bent
90˚ at the point of egress, in one direciton, then returned to its
original position and bent 90˚ in the opposite direction at the
rate of one bend in 2 to 3 sec.
The lead wire of a capacitor should be dipped into a 25%
methanol solution of rosin and then into molten solder of
235±5˚C for 2±0.5 sec. In both cases the depth of dipping is up
to about 1.5 to 2.0mm from the root of lead wires.
(Note) Tests for Dielectric Strength (between lead wires), Charge Discharge Test, Humidity, Temperature Cycle and Life should be performed with
specimens having molded resin (MR1023C : made by Murata) extending over 3mm on all the surface.
* "room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
6
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
Typical Characteristics Data/Packaging
1
■ Cap.-Temp. Char.
B Characteristics
20
20
10
Cap. Change (%)
Cap. Change (%)
ZM Characteristics
40
0
-20
0
-10
-40
-20
-40
-20
0
20
40
60
80
100
-40
-20
0
20
Temperature (˚C)
40
60
80
100
Temperature (˚C)
■ Cap.-DC Bias Char.
ZM Characteristics
B Characteristics
20
20
0
0
Cap. Change (%)
Cap. Change (%)
10
DC15kV
-10
DC10kV
-20
-20
DC15kV
-40
DC10kV
DC12kV
-60
-30
-40
DC12kV
-80
0
2
4
6
8
10
12
14
16
0
2
4
DC-BIAS (kV)
6
8
10
12
14
16
DC-BIAS (kV)
■ Packaging Styles
■ Example
Bulk
Polyethylene Bag
FBT
(HV)
Anode of CRT
DHR Capacitor
DHR
Capacitor
(GND)
Minimum Quantity (Order in Sets Only)
200 (pcs.)
Minimum Order Quantity
200 (pcs.)
• "Minimum Quantity" means the number of units of each delivery or order.
The quantity should be an integral multiple of the "minimum quantity".
(Please note that the actual delivery quantity in a package
may change sometimes.)
7
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
C41E2.pdf 03.4.16
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
DHR Series !Caution/Notice
1
■ !Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
Voltage
Positional
Measurement
DC Voltage
V0-p
DC+AC Voltage
V0-p
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may
self-generate heat due to dielectric loss. The applied
voltage load should be such that the capacitor's selfgenerated heat is within 10°C at an atmosphere
temperature of 25°C. When measuring, use a
thermocouple of small thermal capacity-K of ø0.1mm in
conditions where the capacitor is not affected by radiant
heat from other components or surrounding ambient
fluctuations. Excessive heat may lead to deterioration of
the capacitor's characteristics and reliability. (Never
attempt to perform measurement with the cooling fan
running. Otherwise, accurate measurement cannot be
ensured.)
Failure to follow the above cautions may result, worst
case, in a short circuit and cause fuming or partial
dispersion when the product is used.
■ !Caution (Storage and Operation Condition)
Operating and storage environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. And avoid exposure to
moisture.
The capacitor is designed to be used in insulating
media, such as epoxy resin, silicone oil, etc.
There must be 3mm or more of insulating media for
each direction of the capacitor.
Before cleaning, bonding, or molding this product,
8
verify that these processes do not affect product
quality by testing the performance of a cleaned,
bonded or molded product in the intended equipment.
Store the capacitors where the temperature and
relative humidity do not exceed -10 to 40 degrees
centigrade and 15 to 85%. Use capacitors within 6
months.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
C41E2.pdf 03.4.16
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
DHR Series !Caution/Notice
1
■ !Caution (Soldering and Mounting)
1. Vibration and impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specification of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
When soldering capacitor with a soldering iron, it
should be performed in following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
■ !Caution (Handling)
Vibration and impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
■ Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions. Rinse bath capacity : Output of 20 watts
per liter or less.
Rinsing time : 5 min maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
■ Notice (Rating)
Capacitance change of capacitor
1. Class 1 capacitors
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this product
in a strict time constant circuit.
2. Class 2 and 3 capacitors
Class 2 and 3 capacitors with temperature
characteristics B, E and F have an aging
characteristic, whereby the capacitor continually
decreases its capacitance slightly if the
capacitor is left on for a long time. Moreover,
capacitance might change greatly depending on the
surrounding temperature or an applied voltage.
So, it is not likely to be suitable for use in a
time constant circuit. Please contact us if you
need detailed information.
9
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
High Voltage Ceramic Capacitors DC10-40kV
Mold Type DHS N4700 Series (DC10-40kV)
2
(H)
Murata's high voltage ceramic capacitors, DHS N4700
series, are designed to meet the stringent requirements of
high voltage applications.
These capacitors are especially appropriate for applications
which require a low dissipation factor and a small voltage
coefficient.
L±1.5
2
Features
1. Epoxy resin encapsulated
2. Small size
3. Low dissipation factor and low heating value
4. Linear temperature characteristic
5. Low DC, AC-voltage coefficient
øD±1.5
DC Rated Depth of tapped holes
Voltage (kV)
(mm)
Applications
• Gas laser
• DC HV power supplies
• Lightning arresters, voltage distribution systems
• Electron microscopes, synchroscopes
• Electrostatic coating machines
Part Number
(in mm)
Capacitance
(pF)
Capacitance
Tolerance (%)
10, 15
4
20, 30
6
40
8
DC Rated
Voltage (kV)
Dimensions (mm)
D
DHS4E4A561KC2B
560
DHS4E4A122KH2B
1200
DHS4E4A282KL2B
2800
DHS4E4A502KR2B
5000
DHS4E4A802KT2B
8000
DHS4E4A561MCXB
560
DHS4E4A122MHXB
1200
DHS4E4A282MLXB
2800
DHS4E4A502MRXB
5000
52
DHS4E4A802MTXB
8000
60
DHS4E4C371KC2B
370
20
DHS4E4C112KH2B
1100
DHS4E4C192KL2B
1900
DHS4E4C342KR2B
3400
DHS4E4C532KT2B
5300
DHS4E4C371MCXB
370
DHS4E4C112MHXB
1100
DHS4E4C192MLXB
1900
DHS4E4C342MRXB
3400
52
DHS4E4C532MTXB
5300
60
L
H
Terminal Type
(Screw Thread Type)
20
30
±10
ISO M4, P0.7
(Metric Screw Thread)
38
52
10
60
20
16
12
30
±20
No.8-32, NC-2B
(Inch Screw Thread)
38
30
±10
ISO M4, P0.7
(Metric Screw Thread)
38
52
15
60
20
18
14
30
±20
38
No.8-32, NC-2B
(Inch Screw Thread)
Continued on the following page.
10
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
Continued from the preceding page.
Part Number
2
Capacitance
(pF)
Capacitance
Tolerance (%)
DC Rated
Voltage (kV)
Dimensions (mm)
D
L
H
Terminal Type
(Screw Thread Type)
20
DHS4E4D281KC2B
280
DHS4E4D881KH2B
880
DHS4E4D142KL2B
1400
DHS4E4D252KR2B
2500
DHS4E4D402KT2B
4000
DHS4E4D281MCXB
280
DHS4E4D881MHXB
880
DHS4E4D142MLXB
1400
DHS4E4D252MRXB
2500
DHS4E4D402MTXB
4000
60
DHS4E4F191KC2B
190
20
DHS4E4F591KH2B
590
DHS4E4F941KL2B
940
DHS4E4F172KR2B
1700
DHS4E4F272KT2B
2700
DHS4E4F191MCXB
190
DHS4E4F591MHXB
590
DHS4E4F941MLXB
940
DHS4E4F172MRXB
1700
52
DHS4E4F272MTXB
2700
60
DHS4E4G141KC2B
140
20
DHS4E4G441KH2B
440
DHS4E4G701KL2B
700
DHS4E4G132KR2B
1300
DHS4E4G202KT2B
2000
DHS4E4G141MCXB
140
DHS4E4G441MHXB
440
DHS4E4G701MLXB
700
DHS4E4G132MRXB
1300
52
DHS4E4G202MTXB
2000
60
30
±10
ISO M4, P0.7
(Metric Screw Thread)
38
52
20
60
20
24
20
2
30
±20
No.8-32, NC-2B
(Inch Screw Thread)
38
52
30
±10
ISO M4, P0.7
(Metric Screw Thread)
38
52
30
60
20
28
24
30
±20
No.8-32, NC-2B
(Inch Screw Thread)
38
30
±10
ISO M4, P0.7
(Metric Screw Thread)
38
52
40
60
20
36
32
30
±20
38
No.8-32, NC-2B
(Inch Screw Thread)
11
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
Typical Characteristics Data / Specifications and Test Methods
30
20
3
10
Capacitance
0
2
–10
–20
1
–30
Dissipation Factor
–40
–20
0
20
40
0
60
80
Capacitance Change (%)
2
Typical Voltage Coefficient
Dissipation Factor (%)
Capacitance Change (%)
Temperature Characteristic
0
Capacitance
–20
0
100
2
–10
20
40
Temperature (°C)
60
80
100
DC Rated Voltage (%)
Frequency Characteristic
Capacitance
–4
–6
6
4
2
Dissipation Factor
1
10
Dissipation Factor (%)
Capacitance Change (%)
0
–2
0
100
1000
Frequency (kHz)
No
Item
1
Operating Temperature Range
2
Capacitance
Specifications
Testing Method
-20 to +85°C
Within the specified
The capacitance should be measured at 20°C with 1±0.1kHz
tolerance.
and AC 1 to 5V(r.m.s.).
The capacitance measurement should be made at each step
Temperature coefficient
3
Temperature Characteristics
-4700±1000ppm/°C
(Temp. range: +20 to +85°C)
specified in table.
Capacitance change from the value of step 3 should not exceed the
limit specified.
Step
Temp. (°C)
4
Dissipation Factor (D.F.)
0.3% max.
1
—
2
—
3
20±2
4
85±2
5
20±2
The dissipation factor should be measured at 20°C with 1±0.1kHz
and AC 1 to 5V(r.m.s.).
The capacitor should not be damaged when DC voltage of 150% of
5
Dielectric
Strength
Between Terminal
No failure.
the rated voltage is applied between the terminals for 60±5 sec. in
insulating liquid or gas.
(Charge/Discharge current V 50mA)
6
Insulation Resistance (I.R.)
10000MΩ min.
Strength of
Capacitor should not be
The insulation resistance should be measured with DC1000V within
60±5 sec. of charging.
When mounting the capacitor on equipment, be sure to mount
7
Terminal
Torque Strength
Life
Humidity
9
(Under Steady
State)
Terminal Type
ISO M4, No.8-32
Apply a DC voltage of 125% of the rated voltage for 100+24/-0 hrs. in
Capacitance Change
Within ±5%
silicon oil at 85±2°C.
D.F.
1.0% max.
Post-treatment: Capacitor should be stored for 24 hrs. at *room
I.R.
1000MΩ min.
condition. (Charge/Discharge current V 50mA)
Appearance
No marked defect.
Capacitance Change
Within ±5%
D.F.
1.0% max.
I.R.
1000MΩ min.
Set the capacitor for 100+24/-0 hrs. at 40±2°C in 90 to 95% relative
humidity. Post-treatment: Capacitor should be stored for 24 hrs. at
*room condition.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
12
torque (N·m)
1.5
No marked defect.
Appearance
8
broken.
them within the torque strength values shown in the table below.
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
High Voltage Ceramic Capacitors DC10-40kV
Mold Type DHS Z5V Series (DC20-40kV)
3
(H)
L±1.5
Features
1. Epoxy resin encapsulated
2. Small size
3. Highly reliable internal construction
4. Wide selection of values
5. Up to DC 40kV working voltage
3
Applications
• Electrostatic coating machines
• Electron microscopes, synchroscopes
• CRT power supplies
• Lightning arrester voltage distribution systems
• DC HV power supplies
Part Number
Capacitance
(pF)
øD±1.5
Capacitance
Tolerance (%)
DC Rated
Voltage (kV)
Dimensions (mm)
D
DHSF44D601ZD2B
600
24
DHSF44D102ZH2B
1000
30
DHSF44D242ZN2B
2400
43
DHSF44D332ZR2B
3300
52
DHSF44D482ZT2B
4800
DHSF44D601ZDXB
600
DHSF44D102ZHXB
1000
30
DHSF44D242ZNXB
2400
43
DHSF44D332ZRXB
3300
52
DHSF44D482ZTXB
4800
60
DHSF44F461ZD2B
460
24
DHSF44F781ZH2B
780
30
DHSF44F182ZN2B
1800
43
DHSF44F252ZR2B
2500
52
DHSF44F362ZT2B
3600
DHSF44F461ZDXB
460
20
+80, -20
30
60
24
60
24
DHSF44F781ZHXB
780
30
DHSF44F182ZNXB
1800
43
DHSF44F252ZRXB
2500
52
DHSF44F362ZTXB
3600
60
DHSF44G341ZD2B
340
24
DHSF44G571ZH2B
570
30
DHSF44G132ZN2B
1300
43
DHSF44G192ZR2B
1900
52
DHSF44G272ZT2B
2700
DHSF44G341ZDXB
340
DHSF44G571ZHXB
570
30
DHSF44G132ZNXB
1300
43
DHSF44G192ZRXB
1900
52
DHSF44G272ZTXB
2700
60
40
60
24
L
H
(in mm)
Terminal Type
(Screw Thread Type)
ISO M4, P0.7
(Metric Screw Thread)
26
24
No.8-32, NC-2B
(Inch Screw Thread)
ISO M4, P0.7
(Metric Screw Thread)
34
32
No.8-32, NC-2B
(Inch Screw Thread)
ISO M4, P0.7
(Metric Screw Thread)
41
39
No.8-32, NC-2B
(Inch Screw Thread)
13
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
Typical Characteristics Data
Life
Life Capacitance & D.F. VS Time
Test Voltage : DC 15kV
Temp. : 85°C
Capacitance
–40
–60
2.0
–80
1.0
Dissipation Factor
Capacitance Change (%)
0
–20
Dissipation Factor (%)
Capacitance Change (%)
+20
20
2.0
10
0
1.0
∆C
–10
D.F.
0
–60
–40
–20
0
20
40
60
80
100
120
–20
140
0
2000
0
4000
Time (h)
Temperature (°C)
3
Dissipation Factor (%)
Dissipation Factor and Capacitance-Temperature
Dissipation Factor and Capacitance-Frequency
3
Humidity
Humidity Capacitance & D.F. VS Cycles
Test Voltage : DC 15kV
Temp. : 60°C
Relative Humidity : 90-95%
Capacitance Change
–4
2.0
1.0
Dissipation Factor
0
1kHz
10kHz
100kHz
Capacitance
–10
–20
2.0
–30
1.0
Dissipation Factor
–40
0
–50
60
14
80
100
Dissipation Factor (%)
Capacitance Change (%)
0
DC Rated Voltage (%)
∆C
0
1.0
–10
0
100
200
Time (h)
+10
40
10
2.0
D.F.
Typical Voltage Coefficient
20
20
–20
1MHz
Frequency
0
Capacitance Change (%)
–2
Dissipation Factor (%)
Capacitance Change (%)
0
300
0
400
Dissipation Factor (%)
+2
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
Specifications and Test Methods
No
Item
1
Operating Temperature Range
2
Capacitance
Specifications
Testing Method
-20 to +85°C
Within the specified
The capacitance should be measured at 25°C with 1±0.1kHz
tolerance.
and AC 1 to 5V (r.m.s.).
The capacitance measurement should be made at each step
Capacitance change
3
Temperature Characteristics
+22%/-82%
(Temp. range: +10 to +85°C)
3
4
Dissipation Factor (D.F.)
1.5% max.
specified in table.
Capacitance change from the value of step 3 should not exceed the
limit specified.
Step
Temp. (°C)
1
25±2
2
-20±3
3
25±2
4
85±2
5
25±2
The dissipation factor should be measured at 25°C with 1±0.1kHz
3
and AC 1 to 5V (r.m.s.).
The capacitor should not be damaged when DC voltage of 150% of
5
Dielectric
Strength
Between Terminal
No failure.
the rated voltage is applied between the terminals for 60±5 sec. in
insulating liquid or gas.
(Charge/Discharge current V 50mA)
6
Insulation Resistance (I.R.)
10000MΩ min.
The insulation resistance should be measured with DC1000V within
60±5 sec. of charging.
When mounting the capacitors on equipment, be sure to mount
7
8
Strength of
Terminal
Life
Humidity
9
(Under Steady
State)
Torque Strength
Capacitor should not be
broken.
them within the torque strength values shown in the table below.
Terminal Type
ISO M4, No.8-32
torque (N·m)
1.5
Appearance
No marked defect.
Apply a DC voltage of 125% of the rated voltage for 100+24/-0 hrs. in
Capacitance Change
Within ±20%
silicon oil at 85±2°C.
D.F.
5.0% max.
Post-treatment: Capacitor should be stored for 24 hrs. at *room
I.R.
1000MΩ min.
condition. (Charge/Discharge current V 50mA)
Appearance
No marked defect.
Capacitance Change
Within ±20%
D.F.
5.0% max.
I.R.
1000MΩ min.
Set the capacitor for 100+24/-0 hrs. at 40±2°C in 90 to 95% relative
humidity. Post-treatment: Capacitor should be stored for 24 hrs. at
*room condition.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
15
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
DHS Series !Caution and Notice
Caution
1. Operating voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range. When the voltage is applied to
the circuit, starting or stopping may generate irregular
voltage for a transit period because of resonance or
switching. Be sure to use a capacitor with a rated voltage
range that includes these irregular voltages.
3
3
Voltage
Positional
Measurement
DC Voltage
Vo-p
DC+AC Voltage
Vo-p
2. Operating temperature and self-generated heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself.
When the capacitor is used in a high-frequency current,
pulse current or similar current, it may self-generate heat
due to dielectric loss. The applied voltage load should be
such that the capacitor's self-generated heat is within
10°C at an atmosphere temperature of 25°C.
When measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm in conditions where the capacitor
is not affected by radiant heat from other components or
surrounding ambient fluctuations.
Excessive heat may lead to deterioration of the
capacitor's characteristics and reliability. (Never attempt
to perform measurement with the cooling fan running.
Otherwise, accurate measurement cannot be ensured.)
3. Installation
Installation torque should not exceed the torque strength
values in "Specifications and Test Methods".
Do not use a screw with a thread depth greater than
specified.
Avoid installation in which any bending torque is applied
to the capacitor terminal.
Do not rework or resolder the terminal.
16
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
4. Operating and storage environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store capacitors in a
corrosive atmosphere, especially where chloride gas,
sulfide gas, acid, alkali, salt or the like are present. And
avoid exposure to moisture.
Before cleaning, bonding, or molding this product, verify
that these processes do not affect product quality by
testing the performance of a cleaned, bonded or molded
product in the intended equipment.
Store the capacitors where the temperature and relative
humidity do not exceed –10 to 40°C and 15 to 85%. Use
capacitors within 6 months.
5. Vibration and impact
Do not expose a capacitor to excessive shock or vibration
during use.
Failure to follow the above cautions may result, worst
case, in a short circuit and cause fuming or partial
dispersion when the product is used.
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
C41E2.pdf 03.4.16
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
DHS Series !Caution and Notice
Notice
3
Capacitance change of capacitor
Class 1 capacitors
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this product in a
strict time constant circuit.
Class 2 and 3 capacitors
Class 2 and 3 capacitors with temperature characteristics
B, E and F have an aging characteristic, whereby the
capacitor continually decreases its capacitance slightly if
the capacitor is left on for a long time. Moreover,
capacitance might change greatly depending on the
surrounding temperature or an applied voltage. So, it is
not likely to be suitable for use in a time constant circuit.
Please contact us if you need detailed information.
3
17
C41E2.pdf 03.4.16
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
1
ISO9000 Certifications
1
Manufacturing plants which produce the products in this catalog have obtained the ISO9000 quality system certificate.
Plant
Certified Date
Organization
Registration No.
Applied standard
Izumo Murata Manufacturing Co., Ltd.
Feb. 1. '00
Underwriters Laboratories Inc.
A5587
ISO9001
Murata Electronics (Thailand), Ltd.
Apr. 8. '02
Underwriters Laboratories Inc.
A6279
ISO9001
2
2
3
3
4
4
18
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
C41E2.pdf 03.4.16
Note:
1. Export Control
For customers outside Japan
No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or
otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)
goods or systems specially designed or intended for military end-use or utilization by military end-users.
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
<
<
>
>
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in
applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
r Power plant equipment
t Medical equipment
y Transportation equipment (vehicles, trains, ships, etc.)
u Traffic signal equipment
i Disaster prevention / crime prevention equipment
o Data-processing equipment
!0 Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of April 2003. They are subject to change or our products in it may be discontinued without advance notice. Please
check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product
engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
Head Office
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
Phone: 81-75-951-9111
International Division
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp
工商网监
湘ICP备2023018690号
