FCPF380N60E

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FCP380N60E / FCPF380N60E N-Channel SuperFET® II Easy-Drive MOSFET 600 V, 10.2 A, 380 mΩ Features Description • 650 V @ TJ = 150°C SuperFET® II MOSFET is Fairchild Semiconductor’s brand-new high voltage super-junction (SJ) MOSFET family that is utilizing charge balance technology for outstanding low on-resistance and lower gate charge performance. This technology is tailored to minimize conduction loss, provide superior switching performance, dv/dt rate and higher avalanche energy. Consequently, SuperFET II MOSFET easy-drive series offers slightly slower rise and fall times compared to the SuperFET II MOSFET series. Noted by the "E" part number suffix, this family helps manage EMI issues and allows for easier design implementation. For faster switching in applications where switching losses must be at an absolute minimum, please consider the SuperFET II MOSFET series. • Typ. RDS(on) = 320 mΩ • Ultra Low Gate Charge (Typ. Qg = 34 nC) • Low Effective Output Capacitance (Typ. Coss(eff.) = 97 pF) • 100% Avalanche Tested • An Integrated Gate Resistor • RoHS Compliant Applications • LCD / LED / PDP TV Lighting • Solar Inverter • AC-DC Power Supply D GD S G G D S TO-220 TO-220F S Absolute Maximum Ratings TC = 25oC unless otherwise noted. Symbol VDSS Drain to Source Voltage VGSS Gate to Source Voltage ID Drain Current IDM Drain Current EAS Single Pulsed Avalanche Energy (Note 2) IAR Avalanche Current (Note 1) 2.3 A EAR Repetitive Avalanche Energy (Note 1) 1.06 mJ dv/dt Parameter FCP380N60E FCPF380N60E 600 - DC ±20 - AC (f > 1 Hz) - Continuous (TC = 25oC) - Continuous (TC = 100oC) - Pulsed (Note 1) V ±30 10.2 10.2* 6.4 6.4* 30.6 A 30.6* A 211.6 MOSFET dv/dt mJ 100 Peak Diode Recovery dv/dt (Note 3) (TC = 25oC) PD Power Dissipation TJ, TSTG Operating and Storage Temperature Range Maximum Lead Temperature for Soldering, 1/8” from Case for 5 Seconds TL Unit V - Derate Above 25oC V/ns 20 106 31 W 0.85 0.25 W/oC -55 to +150 o C 300 o C *Drain current limited by maximum junction temperature. Thermal Characteristics Symbol Parameter FCP380N60E FCPF380N60E RθJC Thermal Resistance, Junction to Case, Max. 1.18 4 RθJA Thermal Resistance, Junction to Ambient, Max. 62.5 62.5 ©2012 Fairchild Semiconductor Corporation FCP380N60E / FCPF380N60E Rev. C9 1 Unit o C/W www.fairchildsemi.com FCP380N60E / FCPF380N60E — N-Channel SuperFET® II Easy-Drive MOSFET December 2014 Part Number FCP380N60E Top Mark FCP380N60E Package TO-220 Packing Method Tube Reel Size N/A Tape Width N/A Quantity 50 units FCPF380N60E FCPF380N60E TO-220F Tube N/A N/A 50 units Electrical Characteristics TC = 25oC unless otherwise noted. Symbol Parameter Test Conditions Min. Typ. Max. Unit VGS = 0 V, ID = 10 mA, TJ = 25°C 600 - - VGS = 0 V, ID = 10 mA, TJ = 150°C 650 - - ID = 10 mA, Referenced to 25oC - 0.67 - V/oC VGS = 0 V, ID = 10 A - 700 - V Off Characteristics BVDSS Drain to Source Breakdown Voltage ΔBVDSS / ΔTJ BVDS Breakdown Voltage Temperature Coefficient Drain to Source Avalanche Breakdown Voltage IDSS Zero Gate Voltage Drain Current IGSS Gate to Body Leakage Current VDS = 600 V, VGS = 0 V V - - 1 VDS = 480 V, TC = 125oC - 0.84 - VGS = ±20 V, VDS = 0 V - - ±100 2.5 - 3.5 V - 0.32 0.38 Ω - 10 - S μA nA On Characteristics VGS(th) RDS(on) Gate Threshold Voltage VGS = VDS, ID = 250 μA Static Drain to Source On Resistance gFS Forward Transconductance VGS = 10 V, ID = 5 A VDS = 20 V, ID = 5 A Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Coss Output Capacitance VDS = 380 V, VGS = 0 V, f = 1 MHz Coss(eff.) Effective Output Capacitance Qg(tot) Total Gate Charge at 10V Qgs Gate to Source Gate Charge Qgd Gate to Drain “Miller” Charge ESR Equivalent Series Resistance - 1330 1770 pF - 945 1260 pF - 60 90 pF - 25 - pF VDS = 0 V to 480 V, VGS = 0 V - 97 - pF VDS = 380 V, ID = 5 A, VGS = 10 V - 34 45 nC - 5.3 - nC VDS = 25 V, VGS = 0 V, f = 1 MHz (Note 4) - 13 - nC f = 1 MHz - 6 - Ω - 17 44 ns VDD = 380 V, ID = 5 A, VGS = 10 V, R = 4.7 Ω - 9 28 ns - 64 138 ns - 10 30 ns Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time (Note 4) Drain-Source Diode Characteristics IS Maximum Continuous Drain to Source Diode Forward Current - - 10.2 A ISM Maximum Pulsed Drain to Source Diode Forward Current - - 30.6 A VSD Drain to Source Diode Forward Voltage VGS = 0 V, ISD = 5 A - - 1.2 V trr Reverse Recovery Time - 240 - ns Qrr Reverse Recovery Charge VGS = 0 V, ISD = 5 A, dIF/dt = 100 A/μs - 3 - μC Notes: 1. Repetitive rating: pulse-width limited by maximum junction temperature. 2. IAS = 2.3 A, VDD = 50 V, RG = 25 Ω, starting TJ = 25°C. 3. ISD ≤ 5.1 A, di/dt ≤ 200 A/μs, VDD ≤ BVDSS, starting TJ = 25°C. 4. Essentially independent of operating temperature typical characteristics. ©2012 Fairchild Semiconductor Corporation FCP380N60E / FCPF380N60E Rev. C9 2 www.fairchildsemi.com FCP380N60E / FCPF380N60E — N-Channel SuperFET® II Easy-Drive MOSFET Package Marking and Ordering Information Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 50 VGS = 15.0V 10.0V 8.0V 7.0V 6.0V 5.5V 5.0V 4.5V 10 ID, Drain Current[A] ID, Drain Current[A] 50 1 10 o 150 C o 25 C 1 o -55 C *Notes: 1. 250μs Pulse Test *Notes: 1. VDS = 20V 2. 250μs Pulse Test o 2. TC = 25 C 0.1 0.1 1 VDS, Drain to Source Voltage[V] 10 0.1 20 Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage 4 6 8 VGS, Gate to Source Voltage[V] 100 IS, Reverse Drain Current [A] 0.7 0.6 0.5 VGS = 10V 0.4 VGS = 20V 0.3 o 150 C 10 o 25 C *Notes: 1. VGS = 0V o 0.2 *Note: TC = 25 C 0 5 10 15 20 ID, Drain Current [A] 25 1 0.2 30 Figure 5. Capacitance Characteristics 2. 250μs Pulse Test 0.4 0.6 0.8 1.0 1.2 1.4 VSD, Body Diode Forward Voltage [V] 1.6 Figure 6. Gate Charge Characteristics 10 VGS, Gate to Source Voltage [V] 10000 Ciss 1000 Capacitances [pF] 10 Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 0.8 RDS(ON) [Ω], Drain to Source On-Resistance 2 100 Coss *Note: 1. VGS = 0V 2. f = 1MHz 10 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 1 0.5 0.1 1 10 100 VDS, Drain to Source Voltage [V] ©2012 Fairchild Semiconductor Corporation FCP380N60E / FCPF380N60E Rev. C9 VDS = 120V VDS = 300V VDS = 480V 8 6 4 2 Crss 0 600 3 *Note: ID = 5A 0 5 10 15 20 25 Qg, Total Gate Charge [nC] 30 35 www.fairchildsemi.com FCP380N60E / FCPF380N60E — N-Channel SuperFET® II Easy-Drive MOSFET Typical Performance Characteristics Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. On-Resistance Variation vs. Temperature 3.0 RDS(on), [Normalized] Drain to Source On-Resistance BVDSS, [Normalized] Drain to Source Breakdown Voltage 1.15 1.10 1.05 1.00 0.95 *Notes: 1. VGS = 0V 2. ID = 10mA 0.90 0.85 -100 -50 0 50 100 150 o TJ, Junction Temperature [ C] 2.5 2.0 1.5 1.0 0.0 -100 200 Figure 9. Maximum Safe Operating Area for FCP380N60E 100μs 1ms 10ms DC Operation in This Area is Limited by R DS(on) 10μs 10 ID, Drain Current [A] ID, Drain Current [A] 10μs 100μs 1ms 1 Operation in This Area is Limited by R DS(on) *Notes: 0.1 *Notes: o 2. TJ = 150 C 3. Single Pulse o 2. TJ = 150 C 3. Single Pulse 0.01 0.1 1000 12 6 10 5 8 4 6 1000 3 4 2 2 1 ©2012 Fairchild Semiconductor Corporation FCP380N60E / FCPF380N60E Rev. C9 1 10 100 VDS, Drain to Source Voltage [V] Figure 12. Eoss vs. Drain to Source Voltage EOSS, [μJ] ID, Drain Current [A] Figure 11. Maximum Drain Current vs. Case Temperature 50 75 100 125 o TC, Case Temperature [ C] DC 1. TC = 25 C o 1 10 100 VDS, Drain to Source Voltage [V] 10ms o 1. TC = 25 C 0 25 200 50 10 0.1 0.1 -50 0 50 100 150 o TJ, Junction Temperature [ C] Figure 10. Maximum Safe Operating Area for FCPF380N60E 50 1 *Notes: 1. VGS = 10V 2. ID = 5A 0.5 0 150 4 0 100 200 300 400 500 VDS, Drain to Source Voltage [V] 600 www.fairchildsemi.com FCP380N60E / FCPF380N60E — N-Channel SuperFET® II Easy-Drive MOSFET Typical Performance Characteristics (Continued) FCP380N60E / FCPF380N60E — N-Channel SuperFET® II Easy-Drive MOSFET Typical Performance Characteristics (Continued) Figure 13. Transient Thermal Response Curve for FCP380N60E ZθJC (t), Thermal Response [oC/W] Thermal Response [ZθJC ] 2 1 0.5 PDM 0.2 t1 0.1 0.1 t2 *Notes: 0.05 0.02 0.01 Single pulse o 1. ZθJC(t) = 1.18 C/W Max. 2. Duty Factor, D= t1/t2 3. TJM - TC = PDM * ZθJC(t) 0.05 -5 10 -4 10 -3 -2 10 10 Rectangular Pulse [sec] t1, Rectangular PulseDuration Duration [sec] -1 10 1 Figure 14. Transient Thermal Response Curve FOR FCPF380N60E o ZThermal Response Response [ZθJC[ ]C/W] θJC(t), Thermal 5 0.5 1 0.2 0.1 PDM 0.05 0.1 t1 *Notes: 0.02 0.01 Single pulse 0.05 -5 10 ©2012 Fairchild Semiconductor Corporation FCP380N60E / FCPF380N60E Rev. C9 t2 o 1. ZθJC(t) = 4 C/W Max. 2. Duty Factor, D= t1/t2 3. TJM - TC = PDM * ZθJC(t) -4 10 -3 -2 -1 10 10 10 1 Pulse Duration [sec] tRectangular 1, Rectangular Pulse Duration [sec] 5 10 100 www.fairchildsemi.com FCP380N60E / FCPF380N60E — N-Channel SuperFET® II Easy-Drive MOSFET IG = const. Figure 15. Gate Charge Test Circuit & Waveform VDS RG RL VDS VDD VGS VGS DUT V 10V GS 90% 10% td(on) tr t on td(off) tf t off Figure 16. Resistive Switching Test Circuit & Waveforms VGS Figure 17. Unclamped Inductive Switching Test Circuit & Waveforms ©2012 Fairchild Semiconductor Corporation FCP380N60E / FCPF380N60E Rev. C9 6 www.fairchildsemi.com FCP380N60E / FCPF380N60E — N-Channel SuperFET® II Easy-Drive MOSFET DUT + VDS _ I SD L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD • dv/dt controlled by RG • ISD controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current I SD ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop Figure 18. Peak Diode Recovery dv/dt Test Circuit & Waveforms ©2012 Fairchild Semiconductor Corporation FCP380N60E / FCPF380N60E Rev. C9 7 www.fairchildsemi.com SUPPLIER "B" PACKAGE SHAPE 3.50 10.67 9.65 E SUPPLIER "A" PACKAGE SHAPE 3.40 2.50 16.30 13.90 IF PRESENT, SEE NOTE "D" 16.51 15.42 E 9.40 8.13 E 1 [2.46] 2 3 C 4.10 2.70 14.04 12.70 2.13 2.06 FRONT VIEWS 4.70 4.00 1.62 H 1.42 "A1" 8.65 7.59 SEE NOTE "F" 1.62 1.10 2.67 2.40 1.00 0.55 6.69 6.06 OPTIONAL CHAMFER E 14.30 11.50 NOTE "I" BOTTOM VIEW 3 0.60 0.36 SIDE VIEW 2.85 2.10 2 1 BACK VIEW NOTES: A) REFERENCE JEDEC, TO-220, VARIATION AB B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS COMMON TO ALL PACKAGE SUPPLIERS EXCEPT WHERE NOTED [ ]. D) LOCATION OF MOLDED FEATURE MAY VARY (LOWER LEFT CORNER, LOWER CENTER AND CENTER OF THE PACKAGE) E DOES NOT COMPLY JEDEC STANDARD VALUE. F) "A1" DIMENSIONS AS BELOW: SINGLE GAUGE = 0.51 - 0.61 DUAL GAUGE = 1.10 - 1.45 G) DRAWING FILE NAME: TO220B03REV9 H PRESENCE IS SUPPLIER DEPENDENT I) SUPPLIER DEPENDENT MOLD LOCKING HOLES IN HEATSINK. B A 10.36 9.96 B 3.28 3.08 7.00 3.40 3.20 2.66 2.42 0.70 SEE NOTE "F" SEE NOTE "F" 6.88 6.48 1 X 45° B 16.00 15.60 16.07 15.67 (3.23) B 1 2.14 3 1.47 1.24 2.96 2.56 0.90 0.70 10.05 9.45 0.50 M A 30° 0.45 0.25 2.54 B 2.54 B 4.90 4.50 NOTES: A. EXCEPT WHERE NOTED CONFORMS TO EIAJ SC91A. B DOES NOT COMPLY EIAJ STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5-1994. F. OPTION 1 - WITH SUPPORT PIN HOLE. OPTION 2 - NO SUPPORT PIN HOLE. G. DRAWING FILE NAME: TO220M03REV5 0.60 0.45 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com