FSRB100030RTB00B

Reference Only Spec No.JEYF01FH-1004D-01             P.1/8  FERRITECORE FSRB Series Reference Specification 1. Scope This reference specification is applied to ferrite core (FSRB Series) used for noise suppression. Please contact us when using this product for any other applications than described in the above.  2. Murata Part Number Please see P.4/14.  Part Numbering! ౛㹄㹑㹐㹀㸮㸶㸮㸮㸱㸮㹐㹒㹀㸮㸮㹀 (1) (2) (3) (4) (5) (6) (1)Ferrite  (7) (8) (9) (6) Material   (2)Ring Core(7) Process ࠝB0:Barrel Typeࠞ (3)Dimensions (8) Individual Specification Code (4)Outer DimensionSupplement Code (9) Packing Code ࠝB:Bulk ࠞ (5)Length  3.Material Ferrite Permeability (Ref.) RT (Ni-Zn Type) 1600 ± 30% RN (Ni-Zn Type) 550 ± 30% Curie temperature Ӎ110 °C Ӎ130 °C Electrical resistance Ӎ105Ȑ㺃m Ӎ105Ȑ㺃m  4㸬Use in the environment Operating temperature : -25~+85°C Storage temperature : -25~+125°C  5㸬Shape and Dimension Please see P.5/8~8/8.  6. Appearance Standard 2 Xmm Max 2 ࣭Please see P.4/8 as for Limit size of defect (Xmm ) fig. 1 ࣭If there is any doubt about the appearance, the worst samples shall be made. fig.1 7. Electrical Characteristic Ferrite No. Impedance 7.1 7.2 Frequency-characteri stics of Impedance (reference) Specification Please see P.4/8. Please see P.5/8~8/8.  Test Methods Instruments : AGILENT4191A (or equivalent) Frequency : 100MHz Lead wire : 2UEW AWG#18 Please see P.4/8. Temperature㸸23±2°C  Impedance shall be measured at fig.2 fig.2   8. Inspection Test condition Characteristics shall be measured at 20±15°C, 85% RH under. If the measured value should be doubted, characteristics shall be measured at 23±2°C, 85% RH under again.  Inspection Level: ANSI/ASQC Z1.4-1993, Revel S-4, Normal, Single inspection Inspection item Judgment Measurement AGILENT4191A Characteristic n=10,Ac=0,Re=1 (or equivalent) Appearance AQL 2.5% Visual Inspection Dimension n=10,Ac=0,Re=1 Slide Calipers… etc. MURATA MFG CO.,LTD. Reference Only Spec No.JEYF01FH-1004D-01             P.2/8 9. Packing ࣭Quantity in package࣭weight…Please see P.4/14. ࣭Basic packing Outer Case Dimensions(mm)   ձ 㹕 㹂 㹆 㸲㸮㸴 㸰㸴㸳 㸯㸯㸶 Inner Case  Inner Case  ͤAbove Outer Case size is typical When quantity is less than standard quantity, size or kind of outer case and inner case is changed if needed.  fig.3Outer case ࣭Marking for Outside package   Customer name Purchasing Order Number, Customer Part Number, MURATA part number, Inspection number( 1),RoHS Marking( 2), Quantity, etc 1) « Expression of Inspection No. » ‫ ڧڧ‬OOOO uuu (1) (1) Factory Code (2) Date First digit Second digit Third, Fourth digit (2) (3) : Year / Last digit of year : Month / Jan. to Sep. o 1 to 9, Oct. to Dec. o O,N,D : Day (3) Serial No. 2) « Expression of RoHS Marking » ROHS – Y (‫)ڹ‬ (1) (2) (1) RoHS regulation conformity parts. (2) MURATA classification number  10. Changes of specification Any changes in these devices shall be enforced after consultation.  11. CAUTION 1) Limitation of Applications Please contact us before using our products for the under mentioned applications requiring especially high reliability in order to prevent defects which might directly cause damage to other party's life, body or property (listed below). (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Nuclear control apparatus (5) Medical equipment (6) Transportation equipment (automobiles, trains, ships, etc.) (7) Traffic signal equipment (8) Disaster prevention / crime prevention equipment (9) Data-processing equipment (10) Applications of similar complexity or with reliability requirements comparable to the applications listed in the above 2) Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product.  MURATA MFG CO.,LTD. Reference Only Spec No.JEYF01FH-1004D-01             P.3/8 12. Notice 1) Protect product from damage that may occur in transit such as cracking of core. 2) Handle product with care. Do not drop. 3) Do not apply excessive force to the product. 4)This product is designed for use in the environment specified in this approval drawing; do not be used in the following environments or under the following conditions. (1) Ambient air containing corrosive gas. (Cl2, H2S, NH3, SO2, NOX, etc.) (2) In liquid. (3) Other environments similar to (1) through (2). Please contact us before using our products for the below mentioned environments.  13. Note: 1) Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. 2) You are requested not to use our product deviating from the reference specifications. 3) The contents of this reference specification are subject to change without advance notice. Please approve our product specifications or transact the approval sheet for product specifications before ordering. MURATA MFG CO.,LTD. Reference Only Spec No.JEYF01FH-1004D-01             P.4/8 Murata Part Number, Appearance,Characteristic,Packing List MURATA Characteristic Material Part Number appearance 2 (Xmm ) Dimension Impedance Packing quantity Mass Packing Min. Qty. Total Qty. Unit mass Total mass Lead wire FSRB041020RNB00B RN 2 fig.1 Ӎ22ȍ ij0.8 25mm ձ 10,000 50,000 0.09g 5.4kg FSRB044020RNB00B RN 2 fig.2 Ӎ16ȍ ij0.8 25mm ձ 5,000 25,000 0.09g 3.2kg FSRB060040RNB00B RN 2 fig.3 Ӎ25ȍ ij0.8 35mm ձ 4,000 20,000 0.37g 8.3kg FSRB071040RNB00B RN 2 fig.4 Ӎ20ȍ ij0.8 35mm ձ 2,000 10,000 0.53g 6.2kg FSRB090060RNB00B RN 3 fig.5 Ӎ30ȍ AWG18 40mm ձ 600 3,000 1.3g 4.9kg FSRB090080RNB00B RN 3 fig.5 Ӎ39ȍ AWG18 40mm ձ 600 3,000 1.8g 6.3kg FSRB091060RNB00B RN 3 fig.6 Ӎ38ȍ AWG18 40mm ձ 600 3,000 1.5g 5.4kg FSRB091080RNB00B RN 3 fig.6 Ӎ50ȍ AWG18 40mm ձ 600 3,000 2.0g 6.9kg FSRB100030RTB00B RT 4 fig.7 Ӎ20ȍ AWG18 60mm ձ 1,000 5,000 0.78g 4.8kg FSRB100060RTB00B RT 5 fig.7 Ӎ31ȍ AWG18 60mm ձ 600 3,000 1.6g 5.6kg FSRB100080RTB00B RT 5 fig.7 Ӎ38ȍ AWG18 60mm ձ 500 2,500 2.1g 6.2kg FSRB100100RTB00B RT 5 fig.7 Ӎ45ȍ AWG18 60mm ձ 500 2,500 2.5g 7.3kg  ͤWhen quantity is less than standard quantity, size or kind of outer case and inner case is changed if needed.                                   MURATA MFG CO.,LTD. Reference Only Spec No.JEYF01FH-1004D-01             P.5/8 Shape and Dimension 㸦㹓㹌㹇㹒㸸㹫㹫㸧 fig.㸯        ‫ۑ‬ FSRB041020RNB00B  1000 Impedance(ё) s ȭs ȭs                 fig.㸰        100 FSRB041020RNB00B 10 1 1 10 100 1000 Frequency(MHz)   Murata Part Number Barrel  FSRB044020RNB00B ‫ۑ‬  1000  Impedance(ё) s ȭs     ȭs          Frequency-characteristics of Impedance (reference) Instruments : AGILENT4191A / Lead wire: Through (Please see P.4/8.)  Murata Part Number Barrel  100 FSRB044020RNB00B 10 1 1 10 100 Frequency(MHz) MURATA MFG CO.,LTD. 1000 Reference Only Spec No.JEYF01FH-1004D-01             P.6/8 Shape and Dimension 㸦㹓㹌㹇㹒㸸㹫㹫㸧 fig.㸱        Frequency-characteristics of Impedance (reference) Instruments : AGILENT4191A / Lead wire: Through (Please see P.4/8.)  Murata Part Number Barrel FSRB060040RNB00B ‫ۑ‬  1000 Impedance(ё) s ȭs ȭs                FSRB060040RNB00B 10 1 1 10 100 1000 Frequency(MHz)   fig.㸲       Murata Part Number Barrel  FSRB071040RNB00B ‫ۑ‬     1000 Impedance(ё) ȭs s ȭs            100  100 FSRB071040RNB00B 10 1 1 10 100 Frequency(MHz)  MURATA MFG CO.,LTD. 1000 Reference Only Spec No.JEYF01FH-1004D-01             P.7/8 Shape and Dimension 㸦㹓㹌㹇㹒㸸㹫㹫㸧 Frequency-characteristics of Impedance (reference) Instruments : AGILENT4191A / Lead wire: Through (Please see P.4/8.) fig.㸳 Barrel FSRB090060RNB00B 㹆 6.0±0.5 FSRB090080RNB00B 8.0±0.5 ‫ۑ‬ ȭs ȭs Murata Part Number Impedance(ё) + 1000   ‫ۑ‬ FSRB090080RNB00B 100 10 FSRB090060RNB00B  ͤ㹁㒊ᣑ኱ᅗཧ⪃ ͤCorner Enlargement (Ref.) 1 1 10 100 1000 Frequency(MHz) fig.㸴 Barrel FSRB091060RNB00B 㹆 6.0±0.5 FSRB091080RNB00B 8.0±0.5 ‫ۑ‬ ȭs ȭs Murata Part Number ‫ۑ‬ 1000 10 FSRB091060RNB00B  + Impedance(ё) FSRB091080RNB00B 100   ͤ㹁㒊ᣑ኱ᅗཧ⪃ ͤCorner Enlargement (Ref.) 1 1 10 100 Frequency(MHz) MURATA MFG CO.,LTD. 1000 Reference Only Spec No.JEYF01FH-1004D-01             P.8/8 Shape and Dimension 㸦㹓㹌㹇㹒㸸㹫㹫㸧 Frequency-characteristics of Impedance (reference) Instruments : AGILENT4191A / Lead wire: Through (Please see P.4/8.) fig.㸵 Barrel FSRB100030RTB00B 㹆 3.0±0.3 FSRB100060RTB00B 6.0±0.5 ‫ۑ‬ FSRB100080RTB00B 8.0±0.5 ‫ۑ‬ FSRB100100RTB00B 10.0±0.5 ‫ۑ‬ ȭs ȭs Murata Part Number ‫ۑ‬ 1000  Impedance(ё) + FSRB100100RTB00B  FSRB100080RTB00B 100 10 FSRB100060RTB00B  ͤ㹁㒊ᣑ኱ᅗཧ⪃ ͤCorner Enlargement (Ref.) FSRB100030RTB00B 1 1 10 100 Frequency(MHz) MURATA MFG CO.,LTD. 1000