HPR1000C

HPR10XXC www.murata-ps.com 1.0 WATT UNREGULATED, SIP DC/DC CONVERTER FEATURES ■ OBSOLETE PRODUCT RoHS Compliant Low Cost ■ Last time buy: August 31, 2014. Single-in-line (SIP) Click HerePackage For Obsolescence Notice of February 2014. ■ DESCRIPTION ■ Internal input and output filtering The HPR10XXC Series uses advanced circuit design and packaging technology to deliver superior reliability and performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are reduced when using the HPR10XXC Series with high frequency isolation amplifiers. Reduced parts count and high efficiency add to the reliability of the HPR10XXC Series. The high efficiency of the HPR10XXC Series means less internal power dissipation, as low as 190mW. With reduced heat dissipation the HPR10XXC Series can operate at higher temperatures with no degradation. In addition, the high efficiency of the HPR10XXC Series means the series is able to offer greater than 13 W/inch3 of output power density. Operation down to no load will not impact the reliability of the series, although a 1mA minimum load is needed to realize published specifications. The HPR10XXC Series provides the user low cost without sacrificing reliability. The use of surface mounted devices and advanced manufacturing technologies make it possible to offer premium performance and low cost. Non-Conductive Case ■ High Output Power Density: 13 Watts/Inch3 ■ ■ Extended Temperature Range: -25°C to +65°C ■ Efficiency to 72% (Typical) ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. OBSOLETE Model HPR1000C HPR1001C HPR1004C HPR1005C HPR1018C HPR1022C HPR1023C HPR1002C HPR1003C HPR1006C HPR1007C HPR1008C HPR1009C HPR1010C HPR1011C HPR1012C HPR1013C HPR1014C HPR1015C HPR1016C HPR1017C HPR1019C HPR1020C HPR1021C Nominal Input Voltage VDC Rated Output Voltage VDC Rated Output Current mA 5 5 5 5 24 24 24 5 5 12 12 12 12 12 12 15 15 15 5 12 ±12 ±15 5 ±12 ±15 15 ±5 5 12 15 ±5 ±12 ±15 5 12 15 200 83 ±42 ±34 200 ±42 ±34 67 ±100 200 83 67 ±100 ±42 ±34 200 83 67 15 15 24 24 24 ±12 ±15 12 15 ±5 ±42 ±34 83 67 ±100 Input Current Reflected Efficiency No Load Rated Load Ripple Current mA mAp-p % 33 290 8 68 33 290 8 69 33 285 8 70 33 285 8 70 12 60 15 71 12 58 15 72 12 58 15 72 33 285 8 70 33 285 8 70 18 110 10 70 18 107 10 71 18 107 10 71 18 107 10 71 18 107 10 71 18 107 10 71 15 96 10 70 15 94 10 70 15 94 10 71 15 15 12 12 12 94 94 60 58 58 10 10 15 15 15 71 71 71 72 72 Recommended Alternatives MER1S0505SC MER1S0512SC MEA1D0512SC MEA1D0515SC MER1S2405SC MEA1D2412SC MEA1D2415SC NMR102C / MER1S0515SC NMA0505SC / MEA1D0505SC NMR106C / MER1S1205SC NMR107C / MER1S1212SC NMR108C / MER1S1215SC NMA1205SC / MEA1D1205SC NMA1212SC / MEA1D1212SC NMA1215SC / MEA1D1215SC MER1S1505SC MER1S1512SC MER1S1515SC MEA1D1505SC MEA1D1512SC MEA1D1515SC MER1S2412SC MER1S2415SC MEA1D2405SC 　 For full details go to www.murata-ps.com/rohs www.murata-ps.com/support TDC_HPR10XXC.D02 Page 1 of 4 HPR10XXC 1.0 WATT UNREGULATED, SIP DC/DC CONVERTER MECHANICAL FRONT VIEW Notes: All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) RIGHT SIDE VIEW HPR10XXC PIN PLACEMENT TOLERANCE: ± 0.015" MATERIAL: Lead material is phosphor bronze; finish is 100-300 micro-inches of matte tin over a barrier layer of 5-40 micro-inches of nickel. PIN CONNECTIONS 1. +VIN BOTTOM VIEW 2. -VIN 4. -VOUT 5. COM* 6. +VOUT * Common pin not present on single output models. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range Voltage Rise Time ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Ripple & Noise Voltage Temperature Coefficent REGULATION Line Regulation Load Regulation (5V out only) Load Regulation (All other Models) GENERAL Switching Frequency Frequency Change Package Weight MTTF per MIL-HDBK-217, Rev. E Ground Benign Fixed Ground Naval Sheltered Airborne Uninhabited Fighter CONDITIONS MIN TYP MAX UNITS 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC 21.6 24 26.4 VDC See Typical Performance Curves & Application Notes: "Capacitive Loading Effects on Start-Up of DC/DC Converters" 60 Hz, 10 Seconds 1000 1000 10 25 2 VISO= 240VAC, 60Hz 100 8.5 1.0 VDC Vpk G pF µArms .01 W % mVp-p mVrms VDC VDC VDC %/Deg C High Line to Low Line Rated Load to 1mA Load Rated Load to 1mA Load 1 10 3 %/%Vin % % Over Line and Load 170 24 2 kHz % g Circuit Stress Method TA = +25°C TA = +35°C TA = +35°C TA = +35°C 3.8 1.4 685 211 MHr MHr kHr kHr ±5 100 Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz 1mA Load, VOUT = 5V 1mA Load, VOUT = 12V 1mA Load, VOUT = 15V TEMPERATURE Specification Storage 30 7 15 18 -25 -50 +25 +65 +110 °C °C * For demonstrated MTTF results reference Reliability Report HPR105 www.murata-ps.com/support TDC_HPR10XXC.D02 Page 2 of 4 HPR10XXC 1.0 WATT UNREGULATED, SIP DC/DC CONVERTER TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. VOUT VS LOAD (5Vout Models) VOUT VS LOAD (±5Vout Models) 5.7 5.4 5.5 5.2 VOUT VS LOAD (12Vout Models) 12.5 5.3 12.3 Vout Vout Vout 12.4 5.0 12.2 12.1 5.1 4.8 4.9 4.6 12.0 0 80 40 120 160 11.9 0 Output Current (mA) 20 40 60 0 80 Output Current each load (mA) VOUT VS LOAD (±12Vout Models) VOUT VS LOAD (15Vout Models) 12.6 40 60 80 VOUT VS LOAD (±15Vout Models) 16.5 15.9 12.5 16.0 15.7 12.4 15.5 12.3 15.5 Vout Vout Vout 20 Output Current each load (mA) 15.0 12.2 15.3 14.5 12.1 15.1 14.0 12.0 14.9 0 10 20 30 40 13.5 0 20 40 60 Output Current each load (mA) Output Current each load (mA) EFFICIENCY VS LOAD OSCILLATION FREQUENCY VS TEMPERATURE 90 80 0 0.2 0.4 0.6 0.8 1.0 Output Power each load (Watts) 220 Efficiency (%) Efficiency (%) 75 60 45 30 200 180 160 15 0 0 20 40 60 140 80 % of Rated Load (%) 100 -30 0 30 60 90 Temperature (°C) THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com/support TDC_HPR10XXC.D02 Page 3 of 4 HPR10XXC 1.0 WATT UNREGULATED, SIP DC/DC CONVERTER SAFE OPERATING AREA LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 600 50 Total Load Capacitance (uF) Total Load Capacitance (uF) 500 400 300 SAFE OPERATING AREA 200 40 30 SAFE OPERATING AREA 20 10 100 0 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) NOTES: LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) 1. When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of Hpr10xxC devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steadystate value. 80 70 60 50 SAFE OPERATING AREA 40 0 50 90 Total Load Capacitance (uF) LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 60 30 2. For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS HPR 10XX C Device Family HPR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics RoHS Compliance Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Internal Power Dissipation.....................................................490mW Short Circuit Duration......................................................Momentary This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2014 Murata Power Solutions, Inc. www.murata-ps.com/support TDC_HPR10XXC.D02 Page 4 of 4