MPDKN007S

MPDKN00_S Series Isolated 50W Quarter Brick DC-DC Converter for Telecom Equipment ■Features ● Lowest Profile in the Industry (5.5mm Max.) ● High Efficiency (Up to 89%) ● Wide Input Voltage Range (36 to 75V) ● Trim Function Vout Range (-20 to +10% of Nominal) ● Input-Output Isolation (1.5kVdc) ● Open Frame (Forced Air Convection Cooling) ● Wide Operating Ambient Temp. (-40 to +85 degreeC) ● Over Current Protection ● Over Voltage Protection ● Over Temperature Protection ● On/Off Control (Negative Logic) ● Output Voltage Remote Sensing ● UL60950 Recognized ● Protection Function Latch Method ■Electrical Specifications MPDKN___S Series Model Item 004 006 Input Voltage Range Nominal Output Voltage 007 008 3.3V 5V 50W 50W 48V (36 to 75V) 1.8V 2.5V Nominal Output Wattage 27W 38W Output Voltage Accuracy ±3% (Input Voltage Range 36 to 75V, Operation Temperature Range -40 to 85˚C) Nominal Output Current Efficiency (Typ.) Note 1 Output Ripple Noise Voltage (Max.) Output Voltage Variable Range Protection 15A 85% 10A 87% 88% 100mVp-p (fBW= 20MHz) -20 to +10% Over Voltage, Over Current, Over Temperature Protection Over Current Protection Value 103 to 160% Over Voltage Protection Value 120 to 140% Over Heat Protection Value Remote On/Off Input-Output Isolation Voltage Safety Standard Operation Temperature and Humidity Range Storage Temperature and Humidity Range 89% Negative Logic 1,500Vdc (1 minute) UL60950 (US and Canada) -40 to 85˚C, 20 to 85% (No Condensation, Power Derating) -45 to 90˚C, 10 to 95% (No Condensation) Note 1: Nominal Input Voltage, Nominal Output Current Note • Please read rating and CAUTION (for strage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. YD8U3-039 MPDKN00_S Series Isolated 50W Quarter Brick DC-DC Converter for Telecom Equipment ■Dimensions 10.795± 0 . 5 57.00± 0.5 36.83±0 . 5 Marking of No.1 Pin 3.10± 0.5 MFG, ID 50.80± 0.25 Lot No. Top View 1 8 P 7 2P P 6 2 P 5 2P 4 MPD KN00_S 3 P 5.50Max. 3.68± 0.25 6- =1.15± 0.1 2- =1.65± 0.1 P=3.81±0.25 (in mm) Pin Number and Function Pin No. Pin Symbol Function 1 Vin(+) (+)Positive Input Voltage 2 On/Off Remote On/Off 3 Vin(-) (-)Negative Input Voltage 4 Vout(-) (-)Negative Output Voltage 5 SENSE(-) (-)Negative Remote Sense 6 TRIM Output Voltage Trim 7 SENSE(+) (+)Positive Remote Sense 8 Vout(+) (+)Positive Output Voltage Note • Please read rating and CAUTION (for strage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. YD8U3-039 MPDKN00_S Series Isolated 50W Quarter Brick DC-DC Converter for Telecom Equipment ■Typical Power DeRating When using this product at the ambient air temperature of 30 degreeC or more, it should be used by the following temperature derating. Temperature Derating Characteristic MPDKN004S (Vo=1.8V) 18 15 400LFM(2m/s) 12 Iout(A) 300LFM(1.5m/s) 200LFM(1.0m/s) 9 100LFM(0.5m/s) 6 40LFM(0.2m/s) Vout=1.8V, Vin=36 to 75V TRIM=OPEN, 4-5 pin 7-8 pin short Mounted on 110mm 180mm circuit board with dual-sided copper conductor layer 3 0LFM 0 20 30 40 50 Ta(°C) Ta( C) 60 70 80 MPDKN006S (Vo=2.5V) 18 15 400LFM(2m/s) 300LFM(1.5m/s) Iout(A) 12 200LFM(1.0m/s) 9 100LFM(0.5m/s) 40LFM(0.2m/s) 0LFM 6 Vout=2.5V, Vin=36 to 75V TRIM=OPEN, 4-5 pin 7-8 pin short Mounted on 110mm 180mm circuit board with dual-sided copper conductor layer 3 0 20 30 40 50 Ta(°C) Ta( C) 60 70 80 Note • Please read rating and CAUTION (for strage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. YD8U3-039 MPDKN00_S Series Isolated 50W Quarter Brick DC-DC Converter for Telecom Equipment MPDKN007S (Vo=3.3V) 18 15 400LFM(2m/s) Iout(A) Io 12 300LFM(1.5m/s) 200LFM(1.0m/s) 9 100LFM(0.5m/s) 6 40LFM(0.2m/s) Vout=3.3V, Vin=36 to 75V TRIM=OPEN, 4-5 pin 7-8 pin short Mounted on 110mm 180mm circuit board with dual-sided copper conductor layer 3 0LFM 0 20 30 40 50 Ta(°C) Ta( C) 60 70 80 MPDKN008S (Vo=5.0V) 12.5 10 7.5 Iout(A) Io 400LFM(2m/s) 300LFM(1.5m/s) 200LFM(1.0m/s) 5 100LFM(0.5m/s) Vout=5.0V, Vin=36 to 75V TRIM=OPEN, 4-5 pin 7-8 pin short Mounted on 110mm 180mm circuit board with dual-sided copper conductor layer 2.5 40LFM(0.2m/s) 0LFM 0 20 30 40 50 Ta(°C) Ta( C) 60 70 80 Note • Please read rating and CAUTION (for strage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. YD8U3-039