MPDTH03030WAH

MPDTH**030WAS/WAH Short Form 1 DC-DC Converter Short Form MPDTH**030WAS/WAH (30A output POL-Alliance product) ■ Features ・Point-of-Load Alliance product ・Up to 30A output current ・Wide-Output Voltage Adjust (0.8-5.5V) ・High efficiency up to 94% TYP (@5Vin 3.3V/20Aout) ・Wide Operating Temp - 40 ºC to + 85 ºC ・Open frame TH or SMT termination ・Auto-Track TM Sequencing ・Margin Up/Down Controls ・Pre-Biased start-up ・Output Over-Current Protection ・Output Voltage Sense ・ON/OFF Inhibit ・Under-Voltage Lockout ■ Ordering Information Input Voltage Output Voltage Output Current Model Number ――――――――――――――――――――――――――――――――――――――――― 3.0V to 3.6V 4.5V to 5.5V 10.8V to 13.2V OPTIONS: 0.8V to 2.5V 0.8V to 3.6V 1.2V to 5.5V 30A 30A 26A “WAS” -- SMT termination, MPDTH03030WA(S)/(H) MPDTH05030WA(S)/(H) MPDTH12030WA(S)/(H) “WAH” – TH termination ■ Dimensions 34.80 3.18 3.18 1.52 12.70 12.70 3.18 13 12 11 9.75 MAX. Solder Ball φ1.02 13 Places 9.52 3.18 28.45 12.70 1 1.52 10 9 2 TOP VIEW 8 6 7 9.52 9.52 3 4 5 TOP VIEW SIDE VIEW SMT outline [in (mm)] 34.80 3.18 3.18 1.52 3.55 12.70 12.70 3.18 Signal Vout Vout GND Track Margin Down Margin Up 3.18 28.45 9.52 9 2 TOP VIEW 8 6 7 9.52 9.52 3 4 5 TOP VIEW TH outline [in (mm)] Note: φ1.02 13 Places 10 Signal Pin No. GND 8. Vin 9. Inhibit 10. Inhibit 11. VoAdjust 12. VoSense 13. GND 12.70 1 13 12 11 1.52 Pin No. 1. 2. 3. 4. 5. 6. 7. Host Board 9.00 MAX. SIDE VIEW 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.9.29 MPDTH**030WAS/WAH Short Form 2 ■ Standard Application Track Margin Margin Down Up 13 2 12 11 8 9 1500uF MPDTH**030 + Vin 6 RL 5 4 1 Open =ON 3 7 R1 10 Short =OFF ■ Output Voltage Adjustment R1 = 10k • 0.8V - 2.49k Vout - 0.8V : MPDTH03030 / 05030 R1 = 10k • 0.8V - 1.82k Vout - 1.2V : MPDTH12030 ■ General Specifications Item Input voltage Output voltage Symbol （Ta=25ºC） Condition Vin Vout Parts Number 3.3 3.65 MPDTH05030 4.5 5.0 5.5 MPDTH12030 10.8 12.0 13.2 Vin=2.95Vto 3.65V MPDTH03030 0.8 2.5 Vin=4.5V to 5.5V MPDTH05030 0.8 3.6 Vin=10.8Vto13.2V MPDTH12030 1.2 5.5 Rset 1% tolerance, ±100ppm/℃ Output current Iout MPDTH03030, MPDTH05030 MPDTH12030 Efficiency Eff Max. 2.95 Regtot Vrip Typ. MPDTH03030 Total output variation Ripple voltage Min. Unit V V ±3 %Vo 0 30 A 0 26 Vin=3.3V, Vout=2V,Iout=30A 30 Vin=5.0V, Vout=3.3V,Iout=30A 40 Vin=12.0V, Vout=3.3V,Iout=26A 25 Vin=3.3V,Vout=2.5V,Iout=20A 93 Vin=5.0V,Vout=3.3V, Iout=20A 94 Vin=12.0V,Vout=5.0V, Iout=18A 94.5 mVp-p % Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.9.29 MPDTH**030WAS/WAH Short Form 3 ■ Thermal Derating PTH03030W Safe Operating Area (Vout=2.5V) PTH05030W Safe Operating Area (Vout=3.3V) 90 90 80 80 70 400LFM 60 Ta - °C Ta - °C 70 200LFM 100LFM 50 Nat Conv 200LFM 100LFM 50 40 40 30 30 20 400LFM 60 Nat Conv 20 0 3 6 9 12 15 18 21 24 27 30 0 3 6 9 Iout (A) 12 15 18 21 24 27 30 Iout (A) PTH12030W Safe Operating Area (Vout=3.3V) 90 80 Ta - °C 70 400LFM 60 200LFM 100LFM 50 Nat conv 40 30 20 0 2 4 6 8 10 12 14 16 18 20 22 24 26 Iout (A) ■ Conversion Efficiency PTH05030W Efficiency (Vin=5V) 100 Efficiency - % 95 3.3 V 90 2.5 V 1.8 V 85 1.2 V 80 0.8 V 75 70 0 2 4 6 8 10 12 14 16 18 20 22 Iout - Amps Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.9.29