NSS1C200L, NSV1C200L
Low VCE(sat) Transistor,
PNP, 100 V, 2.0 A
ON Semiconductor’s e 2PowerEdge family of low V CE(sat)
transistors are miniature surface mount devices featuring ultra low
saturation voltage (VCE(sat)) and high current gain capability. These
are designed for use in low voltage, high speed switching applications
where affordable efficient energy control is important.
Typical applications are DC−DC converters and power management
in portable and battery powered products such as cellular and cordless
phones, PDAs, computers, printers, digital cameras and MP3 players.
Other applications are low voltage motor controls in mass storage
products such as disc drives and tape drives. In the automotive
industry they can be used in air bag deployment and in the instrument
cluster. The high current gain allows e2PowerEdge devices to be
driven directly from PMU’s control outputs, and the Linear Gain
(Beta) makes them ideal components in analog amplifiers.
www.onsemi.com
−100 VOLTS, 2.0 AMPS
PNP LOW VCE(sat) TRANSISTOR
COLLECTOR
3
1
BASE
Features
• NSV Prefix for Automotive and Other Applications Requiring
•
2
EMITTER
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
3
1
MAXIMUM RATINGS (TA = 25°C)
Symbol
Max
Unit
Collector-Emitter Voltage
VCEO
−100
Vdc
Collector-Base Voltage
VCBO
−140
Vdc
Emitter-Base Voltage
VEBO
−7.0
Vdc
IC
−2.0
A
ICM
−3.0
A
Symbol
Max
Unit
Total Device Dissipation
TA = 25°C
Derate above 25°C
PD (Note 1)
490
mW
3.7
mW/°C
Thermal Resistance,
Junction−to−Ambient
RqJA (Note 1)
255
°C/W
Total Device Dissipation
TA = 25°C
Derate above 25°C
PD (Note 2)
710
mW
4.3
mW/°C
Thermal Resistance,
Junction−to−Ambient
RqJA (Note 2)
176
°C/W
Junction and Storage
Temperature Range
TJ, Tstg
−55 to
+150
°C
Rating
Collector Current − Continuous
Collector Current − Peak
2
SOT−23 (TO−236)
CASE 318
STYLE 6
MARKING DIAGRAM
VL MG
G
THERMAL CHARACTERISTICS
Characteristic
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR− 4 @ 100 mm2, 1 oz. copper traces.
2. FR− 4 @ 500 mm2, 1 oz. copper traces.
© Semiconductor Components Industries, LLC, 2007
October, 2016 − Rev. 6
1
1
VL = Specific Device Code
M = Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or overbar may
vary depending upon manufacturing location.
ORDERING INFORMATION
Device
Package
Shipping†
NSS1C200LT1G,
NSV1C200LT1G
SOT−23
(Pb−Free)
3000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Publication Order Number:
NSS1C200L/D
NSS1C200L, NSV1C200L
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
OFF CHARACTERISTICS
Collector −Emitter Breakdown Voltage
(IC = −10 mAdc, IB = 0)
V(BR)CEO
Collector −Base Breakdown Voltage
(IC = −0.1 mAdc, IE = 0)
V(BR)CBO
Emitter −Base Breakdown Voltage
(IE = −0.1 mAdc, IC = 0)
V(BR)EBO
Collector Cutoff Current
(VCB = −140 Vdc, IE = 0)
ICBO
Emitter Cutoff Current
(VEB = −6.0 Vdc)
IEBO
Vdc
−100
Vdc
−140
Vdc
−7.0
nAdc
−100
nAdc
−50
ON CHARACTERISTICS
hFE
DC Current Gain (Note 3)
(IC = −10 mA, VCE = −2.0 V)
(IC = −500 mA, VCE = −2.0 V)
(IC = −1.0 A, VCE = −2.0 V)
(IC = −2.0 A, VCE = −2.0 V)
150
120
80
50
Collector −Emitter Saturation Voltage (Note 3)
(IC = −0.1 A, IB = −0.01 A)
(IC = −0.5 A, IB = −0.05 A)
(IC = −1.0 A, IB = −0.100 A)
(IC = −2.0 A, IB = −0.200 A)
VCE(sat)
Base −Emitter Saturation Voltage (Note 3)
(IC = −1.0 A, IB = −0.100 A)
VBE(sat)
Base −Emitter Turn−on Voltage (Note 3)
(IC = −1.0 A, VCE = −2.0 V)
VBE(on)
240
360
V
−0.040
−0.080
−0.115
−0.250
V
−0.950
V
−0.850
Cutoff Frequency
(IC = −100 mA, VCE = −5.0 V, f = 100 MHz)
fT
MHz
Input Capacitance (VEB = 2.0 V, f = 1.0 MHz)
Cibo
200
pF
Output Capacitance (VCB = 10 V, f = 1.0 MHz)
Cobo
22
pF
120
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
3. Pulsed Condition: Pulse Width = 300 msec, Duty Cycle ≤ 2%.
PD, POWER DISSIPATION (W)
0.60
0.50
Note 2
0.40
0.30
Note 1
0.20
0.10
0
0
20
40
60
80
100
120
TA, AMBIENT TEMPERATURE (°C)
Figure 1. Power Derating
www.onsemi.com
2
140
160
NSS1C200L, NSV1C200L
500
500
VCE = 2 V
150°C
25°C
200
−55°C
100
0.01
0.1
1
25°C
200
−55°C
100
0.01
0.1
1
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 2. DC Current Gain
Figure 3. DC Current Gain
1
0.1
150°C
25°C
−55°C
0.01
0.001
300
0
0.001
10
0.01
0.1
IC/IB = 10
1
10
VCE(sat), COLLECTOR−EMITTER VOLTAGE (V)
VCE(sat), COLLECTOR−EMITTER VOLTAGE (V)
0
0.001
VBE(sat), BASE−EMITTER VOLTAGE (V)
DC, CURRENT GAIN
300
400
10
1
150°C
0.1
25°C
−55°C
0.01
0.001
IC/IB = 50
0.01
0.1
1
10
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 4. Collector−Emitter Saturation Voltage
Figure 5. Collector−Emitter Saturation Voltage
1.2
1.0
VBE(sat), BASE−EMITTER VOLTAGE (V)
DC, CURRENT GAIN
400
VCE = 4 V
150°C
−55°C
0.8
25°C
0.6
150°C
0.4
0.2
0
0.001
IC/IB = 10
0.01
0.1
1
10
1.2
1.0
−55°C
0.8
25°C
0.6
150°C
0.4
0.2
0
0.001
IC/IB = 50
0.01
0.1
1
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 6. Base−Emitter Saturation Voltage
Figure 7. Base−Emitter Saturation Voltage
www.onsemi.com
3
10
VBE(on), BASE−EMITTER VOLTAGE (V)
1.0
−55°C
0.8
25°C
0.6
150°C
0.4
0.2
VCE = 2 V
0
0.001
0.01
0.1
1
10
IC, COLLECTOR CURRENT (A)
VCE(sat), COLLECTOR−EMITTER VOLTAGE (V)
NSS1C200L, NSV1C200L
1.00
TJ = 25°C
3A
1A
0.10
0.5 A
IC = 0.1 A
0.01
1.0E−04
1.0E−02
1.0E−01
1.0E+00
Figure 9. Collector Saturation Region
400
80
COBO, OUTPUT CAPACITANCE (pF)
TJ = 25°C
fTEST = 1 MHz
300
200
100
0
0
1
2
3
4
5
6
7
8
50
40
30
20
10
0
0
10
20
30
40
50
60
70
80
90
VCB, COLLECTOR BASE VOLTAGE (V)
Figure 11. Output Capacitance
100
10
TJ = 25°C
fTEST = 1 MHz
VCE = 10 V
10 ms
100
80
60
40
20
0
0.001
60
Figure 10. Input Capacitance
140
120
TJ = 25°C
fTEST = 1 MHz
70
VCE, EMITTER BASE VOLTAGE (V)
IC, COLLECTOR CURRENT (A)
CIBO, INPUT CAPACITANCE (pF)
1.0E−03
IB, BASE CURRENT (A)
Figure 8. Base−Emitter Saturation Voltage
fTau, CURRENT−GAIN BANDWIDTH PRODUCT
(MHz)
2A
0.01
0.1
IC, COLLECTOR CURRENT (A)
1
1 ms
1
100 ms
Thermal Limit
0.1
0.01
0.1
1
10
VCE, COLLECTOR EMITTER VOLTAGE (V)
Figure 12. Current−Gain Bandwidth Product
Figure 13.
www.onsemi.com
4
100
NSS1C200L, NSV1C200L
1000
D = 0.5
R(t), (°C/W)
100
D = 0.2
D = 0.1
D = 0.05
10
D = 0.02
D = 0.01
1
0.1
0.000001
Single Pulse
0.00001
0.0001
0.001
0.01
0.1
t, PULSE TIME (s)
Figure 14. Transient Thermal Resistnce
www.onsemi.com
5
1.0
10
100
1000
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AS
DATE 30 JAN 2018
SCALE 4:1
D
0.25
3
E
1
2
T
HE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.
MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF
THE BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
DIM
A
A1
b
c
D
E
e
L
L1
HE
T
L
3X b
L1
VIEW C
e
TOP VIEW
A
A1
SIDE VIEW
SEE VIEW C
c
MIN
0.89
0.01
0.37
0.08
2.80
1.20
1.78
0.30
0.35
2.10
0°
MILLIMETERS
NOM
MAX
1.00
1.11
0.06
0.10
0.44
0.50
0.14
0.20
2.90
3.04
1.30
1.40
1.90
2.04
0.43
0.55
0.54
0.69
2.40
2.64
−−−
10 °
MIN
0.035
0.000
0.015
0.003
0.110
0.047
0.070
0.012
0.014
0.083
0°
INCHES
NOM
0.039
0.002
0.017
0.006
0.114
0.051
0.075
0.017
0.021
0.094
−−−
MAX
0.044
0.004
0.020
0.008
0.120
0.055
0.080
0.022
0.027
0.104
10°
GENERIC
MARKING DIAGRAM*
END VIEW
RECOMMENDED
SOLDERING FOOTPRINT
XXXMG
G
1
3X
2.90
3X
XXX = Specific Device Code
M = Date Code
G
= Pb−Free Package
0.90
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
0.95
PITCH
0.80
DIMENSIONS: MILLIMETERS
STYLE 1 THRU 5:
CANCELLED
STYLE 6:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
STYLE 7:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
STYLE 9:
PIN 1. ANODE
2. ANODE
3. CATHODE
STYLE 10:
PIN 1. DRAIN
2. SOURCE
3. GATE
STYLE 11:
STYLE 12:
PIN 1. ANODE
PIN 1. CATHODE
2. CATHODE
2. CATHODE
3. CATHODE−ANODE
3. ANODE
STYLE 15:
PIN 1. GATE
2. CATHODE
3. ANODE
STYLE 16:
PIN 1. ANODE
2. CATHODE
3. CATHODE
STYLE 17:
PIN 1. NO CONNECTION
2. ANODE
3. CATHODE
STYLE 18:
STYLE 19:
STYLE 20:
PIN 1. NO CONNECTION PIN 1. CATHODE
PIN 1. CATHODE
2. CATHODE
2. ANODE
2. ANODE
3. GATE
3. ANODE
3. CATHODE−ANODE
STYLE 21:
PIN 1. GATE
2. SOURCE
3. DRAIN
STYLE 22:
PIN 1. RETURN
2. OUTPUT
3. INPUT
STYLE 23:
PIN 1. ANODE
2. ANODE
3. CATHODE
STYLE 24:
PIN 1. GATE
2. DRAIN
3. SOURCE
STYLE 27:
PIN 1. CATHODE
2. CATHODE
3. CATHODE
STYLE 28:
PIN 1. ANODE
2. ANODE
3. ANODE
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42226B
SOT−23 (TO−236)
STYLE 8:
PIN 1. ANODE
2. NO CONNECTION
3. CATHODE
STYLE 13:
PIN 1. SOURCE
2. DRAIN
3. GATE
STYLE 25:
PIN 1. ANODE
2. CATHODE
3. GATE
STYLE 14:
PIN 1. CATHODE
2. GATE
3. ANODE
STYLE 26:
PIN 1. CATHODE
2. ANODE
3. NO CONNECTION
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative