NXRT15WB333JA1B020

R44E.pdf Mar.6,2020 NTC Thermistors !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant F**2&#.0-"3!21',2&'1!2*-%!-+.*7 5'2& -@ F -'1Ÿ2&# 30-.#,'0#!2'4# |z{{G€G -,2&##120'!2'-,-$2&# 1#-$#02',80"-313 12,!#1', *#!20'!*," *#!20-,'! /3'.+#,2@Ÿ FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5#  .%#AŸ302ž1..0-!&$-0 -Ÿ H&22.1BGG555@+302@!-+G#,Q#3G13..-02G !-+.*',!#G0-&1J@ R44E.pdf Mar.6,2020 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 1 Contents Product specifications are as of February 2020. Part Numbering p2 Basic Characteristics p5 1 Temperature Sensor and Compensation 0201 (0603) Size p6 2 Temperature Sensor and Compensation 0402 (1005) Size/NCP Series p7 Temperature Sensor and Compensation 0402 (1005) Size/NCU Series p9 3 Temperature Sensor and Compensation 0603 (1608) Size/NCP Series p10 Temperature Sensor and Compensation 0603 (1608) Size/NCU Series p12 Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions p13 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) p14 Temperature Sensor and Compensation Chip Type !Caution/Notice p17 Temperature Sensor and Compensation Chip Type Package p21 4 Temperature Sensor Thermo String Cooper Wire Type p23 Temperature Sensor Thermo String Nickel Copper Wire Type p24 Temperature Sensor Thermo String Type Specifications and Test Methods p25 5 Temperature Sensor Lead Type p27 Temperature Sensor Lead Type Specifications and Test Methods p28 6 Temperature Sensor Lead Insulation Type p29 Temperature Sensor Lead Insulation Type Specifications and Test Methods p30 Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value) p31 Temperature Sensor Thermo String/Lead Type !Caution/Notice p32 Temperature Sensor Thermo String/Lead Type Package p34 Please check the MURATA website (https://www.murata.com/) if you cannot find a part number in this catalog. 2 3 4 5 6 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering NTC Thermistors for Temp. Sensor and Compensation Chip Type (Part Number) NC P 18 XH 103 J 03 RB 1 2 3 4 5 6 7 8 5Resistance 1Product ID Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Product ID NC NTC Thermistors Chip Type 2Series Ex. Resistance Series 102 1kΩ P Plated Termination Series 103 10kΩ U High Reliability Series 104 100kΩ 3Dimensions (L x W) 6Resistance Tolerance Code Dimensions (L x W) EIA Code Resistance Tolerance 03 0.60 x 0.30mm 0201 D ±0.5% 15 1.00 x 0.50mm 0402 F ±1% 18 1.60 x 0.80mm 0603 E ±3% 21 2.00 x 1.25mm 0805 J ±5% 4Temperature Characteristics 2 Code Code Code Temperature Characteristics XC Nominal B-Constant 3100–3149K XF 7Individual Specifications Structures and other specifications are expressed by two figures. Ex. Code Individual Specifications Nominal B-Constant 3250–3299K 03/05/10/12/60 Standard Type pS Automotive Type XH Nominal B-Constant 3350–3399K XM Nominal B-Constant 3500–3549K XQ Nominal B-Constant 3650–3699K XV Nominal B-Constant 3900–3949K Code Packaging XW Nominal B-Constant 3950–3999K RA Plastic Taping 4mm Pitch (4000 pcs.) WB Nominal B-Constant 4050–4099K RB Paper Taping 4mm Pitch (4000 pcs.) WD Nominal B-Constant 4150–4199K RC Paper Taping 2mm Pitch (10000 pcs.) WF Nominal B-Constant 4250–4299K RL Paper Taping 2mm Pitch (15000 pcs.) WL Nominal B-Constant 4450–4499K WM Nominal B-Constant 4500–4549K 8Packaging R44E.pdf Mar.6,2020 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 NTC Thermistor for Temperature Sensor Thermo String Type (Part Number) NXF T 15 XH 103 1 2 3 4 5 F A 2 1Product ID 025 : 7Lead Wire Type Product ID NXF B 6 7 8 9 NTC Thermistors Sensor Thermo String Type Code Lead Wire Type A ø0.3mm Copper Lead Wire with Polyurethane Coat E ø0.3mm Nickel Copper Lead Wire with Modified Polyester Coat 2Individual Specifications Code Individual Specifications T Commercial Type 8Shape of the Lead Wire Kink Shape of the Lead Wire Kink Code 3Chip Dimensions Code Dimensions (L x T) EIA 15 1.00 x 0.50mm 0402 1 Twisted Lead Wire Type 2 Standard Type (Cooper Wire Type) A Standard Type (Nickel Copper Wire Type) 9Packaging 4Temperature Characteristics Code Temperature Characteristics XH Nominal B-Constant 3350–3399K XM Nominal B-Constant 3500–3549K Code Packaging B Bulk :Dimensions (Full Length) XV Nominal B-Constant 3900–3949K Code Dimensions (Full Length) WB Nominal B-Constant 4050–4099K 021 21mm WF Nominal B-Constant 4250–4299K 025 25mm 030 30mm 5Resistance 035 35mm Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. 040 40mm 045 45mm 050 50mm 060 60mm 070 70mm 080 80mm Ex. Code Resistance 103 10kΩ 473 47kΩ 104 100kΩ 6Resistance Tolerance Code Resistance Tolerance F ±1% E ±3% 090 90mm 100 100mm 110 110mm 120 120mm 130 130mm 140 140mm 150 150mm 3 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistor for Temperature Sensor/Lead Type (Part Number) NXR T 15 XH 103 1 2 3 4 5 F A 1Product ID B 040 : 7Lead Wire Type Product ID NXR 1 6 7 8 9 NTC Thermistor Sensor/Lead Type Code Lead Wire Type A Lead Type: ø0.4mm Copper-clad Fe Wire, Tinned Lead Insulation Type: ø0.46mm Cu Wire with Coat 2Individual Specifications Code Individual Specifications T Commercial Type 3Chip Dimensions Code Dimensions (L x T) 15 1.00 x 0.50mm 8Shape of the Lead Wire Code Shape of the Lead Wire 1 Lead Spacing 2.5mm 3 Lead Spacing 5.0mm 5 Lead Spacing 2.5mm (Insulation Type) 9Packaging 4Temperature Characteristics Code Packaging Code Temperature Characteristics A Ammo Pack Taping XH Nominal B-Constant 3350–3399K B Bulk XM Nominal B-Constant 3500–3549K XV Nominal B-Constant 3900–3949K WB Nominal B-Constant 4050–4099K Code Lead Type Lead Insulation Type WF Nominal B-Constant 4250–4299K 010 10mm – 020 20mm – 5Resistance 025 – 25mm Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. 030 30mm 30mm 035 – 35mm 040 40mm 40mm 045 – 45mm 050 50mm 50mm 016 16mm (Taping Type) – Ex. Code Resistance 202 2.0kΩ 103 10kΩ 104 100kΩ 6Resistance Tolerance 4 Code Resistance Tolerance F ±1% E ±3% J ±5% :Dimensions (Full Length) R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 Basic Characteristics Basic Characteristics Resistance vs. Temperature 102 Resistance vs. Temperature Characteristics, R/R25 1. Zero-power Resistance of Thermistor: R R=R0 expB (1/T–1/T0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (1) R: Resistance in ambient temperature T (K) (K: absolute temperature) R0: Resistance in ambient temperature T0 (K) B: B-Constant of Thermistor 2. B-Constant as (1) formula B= n (R/R0) / (1/T–1/T0) 3. Thermal Dissipation Constant When electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, the formula is as follows P=C (T2–T1) C: Thermal dissipation constant (mW/°C) Thermal dissipation constant is varied with dimensions, measurement conditions, etc. 4. Thermal Time Constant Period in which the thermistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (°C) to T1 (°C). 101 1 10–1 B=3450 B=3900 B=4100 10–2 –20 0 20 40 60 80 100 120 Temperature (°C) Thermal Time Constant T1 Temperature X 63.2% T0 Time Performance Item Resistance B-Constant Condition Measured by zero-power in specified ambient temperature. Calculated between two specified ambient temperatures by the next formula. T and T0 is absolute temperature (K). B= Thermal Dissipation Constant Maximum Operating Current n (R/R0) 1/T–1/T0 Shows necessary electric power that Thermistor's temperature rises 1°C by self-heating. It is calculated by the next formula (mW/°C). C= P T–T0 It is possible to keep the thermistor's temperature rising max. 0.1°C. Please inquire about test conditions and ratings. 5 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Mar.6,2020 NTC Thermistors Temperature Sensor and Compensation 0201 (0603) Size 0.30±0.03 Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment. 0.15±0.05 Features 0.15±0.05 0.60±0.03 0.30±0.03 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) Electrode (Ag System + Ni Plating + Sn Plating) (in mm) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/ncp Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant (25-80°C) (Reference Value) (K) Maximum Voltage (V) Typical Dissipation Constant (25°C) (mW/°C) NCP03XM102p05RL 1.0k 3500 ±1% 3539 3545 3560 NCP03XM152p05RL 1.5k 3500 ±1% 3539 3545 3560 0.316 5 1 0.258 5 NCP03XM222p05RL 2.2k 3500 ±1% 3539 3545 1 3560 0.213 5 1 NCP03XM332p05RL 3.3k 3500 ±1% 3539 NCP03XM472p05RL 4.7k 3500 ±1% 3539 3545 3560 0.174 5 1 3545 3560 0.146 5 NCP03XH682p05RL 6.8k 3380 ±1% 1 3428 3434 3455 0.121 5 NCP03XH103F05RL 10k ±1% 1 3380 ±1% 3428 3434 3455 0.100 5 1 NCP03XH103p05RL 10k 3380 ±1% 3428 3434 3455 0.100 5 1 NCP03XV103p05RL 10k 3900 ±1% 3930 3934 3944 0.100 5 1 NCP03XH153p05RL 15k 3380 ±1% 3428 3434 3455 0.082 5 1 NCP03XH223F05RL 22k ±1% 3380 ±1% 3428 3434 3455 0.067 5 1 NCP03XH223p05RL 22k 3380 ±1% 3428 3434 3455 0.067 5 1 NCP03WF333p05RL 33k 4250 ±1% 4303 4311 4334 0.055 5 1 NCP03WB473F05RL 47k ±1% 4050 ±1% 4101 4108 4131 0.046 5 1 NCP03WB473p05RL 47k 4050 ±3% 4101 4108 4131 0.046 5 1 NCP03WL473p05RL 47k 4485 ±1% 4537 4543 4557 0.046 5 1 NCP03WF683F05RL 68k ±1% 4250±1% 4303 4311 4334 0.038 5 1 NCP03WF683p05RL 68k 4250 ±1% 4303 4311 4334 0.038 5 1 NCP03WL683p05RL 68k 4485 ±1% 4537 4543 4557 0.038 5 1 NCP03WF104F05RL 100k ±1% 4250 ±1% 4303 4311 4334 0.032 5 1 NCP03WF104p05RL 100k 4250 ±1% 4303 4311 4334 0.032 5 1 NCP03WL104p05RL 100k 4485 ±1% 4537 4543 4557 0.032 5 1 NCP03WL154p05RL 150k 4485 ±1% 4537 4543 4557 0.026 5 1 NCP03WL224p05RL 220k 4485 ±1% 4537 4543 4557 0.021 5 1 NCP03WF474F05RL 470k ±1% 4250±1% 4303 4311 4334 0.015 5 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Operating Temperature Range: -40°C to +125°C 6 B-Constant B-Constant Maximum Operating (25-85°C) (25-100°C) Current (25°C) (Reference Value) (K) (Reference Value) (K) (mA) R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size/NCP Series 0.5±0.05 Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment. 0.25±0.10 Features 2 0.25±0.10 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. Same B-constant in the same resistance in the two sizes (0603 size/0402 size) Downsize is easy for design. 6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) 0.5±0.05 1.0±0.05 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/ncp Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Maximum Operating Maximum Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Voltage Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (V) (mW/°C) NCP15XM221p03RC 220 3500 ±3% 3539 3545 3560 0.674 5 1 NCP15XM331p03RC 330 3500 ±3% 3539 3545 3560 0.550 5 1 NCP15XQ471p03RC 470 3650 ±2% 3688 3693 3706 0.609 5 1 NCP15XQ681p03RC 680 3650 ±3% 3688 3693 3706 0.383 5 1 NCP15XQ102p03RC 1.0k 3650 ±2% 3688 3693 3706 0.316 5 1 NCP15XW152p03RC 1.5k 3950 ±3% 3982 3987 3998 0.258 5 1 NCP15XW222p03RC 2.2k 3950 ±3% 3982 3987 3998 0.213 5 1 NCP15XW332p03RC 3.3k 3950 ±3% 3982 3987 3998 0.174 5 1 NCP15XM472p03RC 4.7k 3500 ±2% 3539 3545 3560 0.146 5 1 NCP15XW472p03RC 4.7k 3950 ±3% 3982 3987 3998 0.146 5 1 NCP15XW682p03RC 6.8k 3950 ±3% 3982 3987 3998 0.121 5 1 NCP15XH103D03RC 10k ±0.5% 3380 ±0.7% 3428 3434 3455 0.100 5 1 NCP15XH103F03RC 10k ±1% 3380 ±1% 3428 3434 3455 0.100 5 1 NCP15XH103p03RC 10k 3380 ±1% 3428 3434 3455 0.100 5 1 NCP15XV103p03RC 10k 3900 ±3% 3930 3934 3944 0.100 5 1 NCP15XW153p03RC 15k 3950 ±3% 3982 3987 3998 0.082 5 1 NCP15XW223p03RC 22k 3950 ±3% 3982 3987 3998 0.067 5 1 NCP15WL223p03RC 22k 4485 ±1% 4537 4543 4557 0.067 5 1 NCP15WB333p03RC 33k 4050 ±3% 4101 4108 4131 0.055 5 1 NCP15WL333p03RC 33k 4485 ±1% 4537 4543 4557 0.055 5 1 NCP15WB473D03RC 47k ±0.5% 4050 ±0.5% 4101 4108 4131 0.046 5 1 NCP15WB473F03RC 47k ±1% 4050 ±1% 4101 4108 4131 0.046 5 1 NCP15WB473p03RC 47k 4050 ±1% 4101 4108 4131 0.046 5 1 NCP15WL473p03RC 47k 4485 ±1% 4537 4543 4557 0.046 5 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Operating Temperature Range: -40°C to +125°C Continued on the following page. 7 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 Continued from the preceding page. Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) NCP15WD683p03RC 68k 4150 ±3% 4201 4209 4232 0.038 5 1 NCP15WL683p03RC 68k 4485 ±1% 4537 4543 4557 0.038 5 1 NCP15WF104D03RC 2 B-Constant B-Constant B-Constant Maximum Operating Maximum Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Voltage Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (V) (mW/°C) 4303 4311 4334 0.032 5 1 NCP15WF104F03RC 100k ±0.5% 4250 ±0.5% 100k ±1% 4250 ±1% 4303 4311 4334 0.032 5 1 NCP15WF104p03RC 100k 4250 ±1% 4303 4311 4334 0.032 5 1 NCP15WL104p03RC 100k 4485 ±1% 4537 4543 4557 0.032 5 1 NCP15WL154p03RC 150k 4485 ±1% 4537 4543 4557 0.026 5 1 NCP15WM154p03RC 150k 4500 ±3% 4571 4582 4614 0.026 5 1 NCP15WM224p03RC 220k 4500 ±3% 4571 4582 4614 0.021 5 1 NCP15WM474p03RC 470k 4500 ±3% 4571 4582 4614 0.015 5 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Operating Temperature Range: -40°C to +125°C 8 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size/NCU Series 0.5±0.05 Chip NTC Thermistors have Ni barrier termination, provide excellent solderability and offer high stability in environment due to unique inner construction. This is new series, available market where request the high reliability for wide temperature sensing and compensation. 0.25±0.10 0.25±0.10 0.5±0.05 1.0±0.05 Features 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. Same B-constant in the same resistance in the two sizes (0603 size/0402 size) Downsize is easy for design. 6. NCU series are recognized by UL/cUL. (UL1434, File No.E137188) 2 Electrode (Cu System + Ni Plating + Sn Plating) (in mm) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/ncu Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Maximum Operating Maximum Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Voltage Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (V) (mW/°C) NCU15XH103D60RC 10k ±0.5% 3380 ±0.7% 3428 3434 3455 0.100 5 NCU15XH103F60RC 10k ±1% 3380 ±1% 3428 3434 3455 0.100 5 1 NCU15XH103p60RC 10k 3380 ±1% 3428 3434 3455 0.100 5 1 NCU15WB473D60RC 47k ±0.5% 4050 ±0.5% 4101 4108 4131 0.046 5 1 NCU15WB473F60RC 47k ±1% 4050 ±1% 4101 4108 4131 0.046 5 1 1 NCU15WB473p60RC 47k 4050 ±1% 4101 4108 4131 0.046 5 1 NCU15WF104D60RC 100k ±0.5% 4250 ±0.5% 4303 4311 4334 0.032 5 1 NCU15WF104F60RC 100k ±1% 4250 ±1% 4303 4311 4334 0.032 5 1 NCU15WF104p60RC 100k 4250 ±1% 4303 4311 4334 0.032 5 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Operating Temperature Range: -40°C to +125°C If there is any additionally electrical characteristics, please contact from close sales office or website. 9 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistors Temperature Sensor and Compensation 0603 (1608) Size/NCP Series 0.8±0.15 Chip NTC Thermistors' Ni barrier termination provides excellent solderability and their unique construction offers high stability in the application's environment. 0.2-0.6 Features 3 0.2-0.6 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-constant 4. Flow/Reflow soldering possible 5. Same B-Constant in the same resistance in the two sizes (0603 size/0402 size) Downsize is easy for design. 6. NCP series are recognized by UL/cUL. (UL1434, File No.E137188) 0.8±0.15 1.6±0.15 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/ncp Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Maximum Operating (25-80°C) (25-85°C) (25-100°C) Current (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) Maximum Voltage (V) Typical Dissipation Constant (25°C) (mW/°C) NCP18XM221p03RB 220 3500 ±3% 3539 3545 3560 0.674 5 1 NCP18XM331p03RB 330 3500 ±3% 3539 3545 3560 0.550 5 1 NCP18XQ471p03RB 470 3650 ±2% 3688 3693 3706 0.609 5 1 NCP18XQ681p03RB 680 3650 ±3% 3688 3693 3706 0.383 5 1 NCP18XQ102p03RB 1.0k 3650 ±2% 3688 3693 3706 0.316 5 1 NCP18XW152p03RB 1.5k 3950 ±3% 3982 3987 3998 0.258 5 1 NCP18XW222p03RB 2.2k 3950 ±3% 3982 3987 3998 0.213 5 1 NCP18XW332p03RB 3.3k 3950 ±3% 3982 3987 3998 0.174 5 1 NCP18XM472p03RB 4.7k 3500 ±2% 3539 3545 3560 0.146 5 1 NCP18XW472p03RB 4.7k 3950 ±3% 3982 3987 3998 0.146 5 1 NCP18XW682p03RB 6.8k 3950 ±3% 3982 3987 3998 0.121 5 1 3428 3434 3455 0.100 5 1 NCP18XH103D03RB 10k ±0.5% 3380 ±0.7% NCP18XH103F03RB 10k ±1% 3380 ±1% 3428 3434 3455 0.100 5 1 NCP18XH103p03RB 10k 3380 ±1% 3428 3434 3455 0.100 5 1 NCP18XV103p03RB 10k 3900 ±3% 3930 3934 3944 0.100 5 1 NCP18XW153p03RB 15k 3950 ±3% 3982 3987 3998 0.082 5 1 NCP18XW223p03RB 22k 3950 ±3% 3982 3987 3998 0.067 5 1 NCP18WB333p03RB 33k 4050 ±3% 4101 4108 4131 0.055 5 1 NCP18WB473D03RB 4101 4108 4131 0.046 5 1 NCP18WB473F10RB 47k ±1% 4050 ±1.5% 4101 4108 4131 0.046 5 1 NCP18WB473p03RB 47k 4050 ±1% 4101 4108 4131 0.046 5 1 NCP18WD683p03RB 68k 4150 ±3% 4201 4209 4232 0.038 5 1 4303 4311 4334 0.032 5 1 NCP18WF104D03RB 47k ±0.5% 4050 ±0.5% 100k ±0.5% 4250 ±0.5% p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Operating Temperature Range: -40°C to +125°C Continued on the following page. 10 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 Continued from the preceding page. Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Maximum Operating (25-80°C) (25-85°C) (25-100°C) Current (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) Maximum Voltage (V) Typical Dissipation Constant (25°C) (mW/°C) NCP18WF104F12RB 100k ±1% 4250 ±1% 4303 4311 4334 0.032 5 1 NCP18WF104p03RB 100k 4250 ±2% 4303 4311 4334 0.032 5 1 NCP18WM154p03RB 150k 4500 ±3% 4571 4582 4614 0.026 5 1 NCP18WM224p03RB 220k 4500 ±3% 4571 4582 4614 0.021 5 1 NCP18WM474p03RB 470k 4500 ±3% 4571 4582 4614 0.015 5 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Operating Temperature Range: -40°C to +125°C 3 11 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistors Temperature Sensor and Compensation 0603 (1608) Size/NCU Series 3 0.8±0.15 Chip NTC Thermistors have Ni barrier termination, provide excellent solderability and offer high stability in environment due to unique inner construction. This is new series, available market where request the high reliability for wide temperature sensing and compensation. 0.2-0.6 0.2-0.6 0.8±0.15 1.6±0.15 Features Electrode (Cu System + Ni Plating + Sn Plating) 1. Excellent solderability and high stability in the application's environment 2. Excellent long-term stability 3. High accuracy in resistance and B-constant 4. Flow/Reflow soldering possible 5. Same B-Constant in the same resistance in the two sizes (0603 size/0402 size) Downsize is easy for design. 6. NCU series are recognized by UL/cUL. (UL1434, File No.E137188) (in mm) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/ncu Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number NCU18XH103D60RB Resistance (25°C) (ohm) B-Constant B-Constant B-Constant B-Constant (25-50°C) (25-80°C) (25-85°C) (25-100°C) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) 10k ±0.5% 3380 ±0.7% 3428 3434 3455 Maximum Voltage (V) Typical Dissipation Constant (25°C) (mW/°C) 0.100 5 1 NCU18XH103F60RB 10k ±1% 3380 ±1% 3428 3434 3455 0.100 5 1 NCU18XH103p60RB 10k 3380 ±1% 3428 3434 3455 0.100 5 1 NCU18WB473D60RB 4101 4108 4131 0.046 5 1 NCU18WB473F60RB 47k ±0.5% 4050 ±0.5% 47k ±1% 4050 ±1% 4101 4108 4131 0.046 5 1 NCU18WB473p60RB 47k 4050 ±1% 4101 4108 4131 0.046 5 1 NCU18WF104D60RB 100k ±0.5% 4250 ±0.5% 4303 4311 4334 0.032 5 1 NCU18WF104F60RB 100k ±1% 4250 ±1% 4303 4311 4334 0.032 5 1 NCU18WF104p60RB 100k 4250 ±2% 4303 4311 4334 0.032 5 1 NCU18WM154p60RB 150k 4500 ± 3% 4571 4582 4614 0.026 5 1 NCU18WM224p60RB 220k 4500 ± 3% 4571 4582 4614 0.021 5 1 NCU18WM474p60RB 470k 4500 ± 3% 4571 4582 4614 0.015 5 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Operating Temperature Range: -40°C to +125°C If there is any additionally electrical characteristics, please contact from close sales office or website. 12 Maximum Operating Current (25°C) (mA) !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor and Compensation Chip Type Standard Land Pattern Dimensions c Chip b Part Number NCP03 NCP15 NCU15 NCP18 NCU18 Solder Resist Land a Dimensions (mm) Soldering Methods Chip (LxW) a b Reflow Soldering 0.6x0.3 0.25 0.3 Reflow Soldering 1.0x0.5 0.4 0.4-0.5 Reflow Soldering 1.0x0.5 0.6 0.4-0.5 0.6-1.0 0.8-0.9 Flow Soldering 1.6x0.8 0.6-0.8 0.6-0.7 Reflow Soldering 0.6-1.2 0.8-0.9 Flow Soldering 1.6x0.8 0.6-1.2 0.6-0.7 Reflow Soldering c 0.3 0.5 0.5 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 13 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Part Number NCPppXM221 NCPppXM331 NCPppXQ471 NCPppXQ681 NCPppXM102 NCPppXQ102 NCPppXM152 NCPppXW152 Resistance 220Ω 330Ω 680Ω 1.0kΩ 470Ω 1.0kΩ 1.5kΩ 1.5kΩ B-Constant 3500K 3650K 3500K 3500K 3650K 3650K 3500K 3950K Temp. (°C) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) –40 4947.904 7421.856 17104.854 21.266 11822.473 25.154 31.899 51.791 –35 3703.755 5555.632 12685.248 16.150 8767.745 18.655 24.225 37.172 –30 2798.873 4198.309 9505.855 12.347 6570.224 13.979 18.520 27.005 –25 2135.887 3203.831 7193.219 9.503 4971.784 10.578 14.255 19.843 –20 1645.037 2467.555 5493.436 7.365 3796.933 8.079 11.047 14.728 –15 1278.034 1917.051 4229.599 5.747 2923.400 6.220 8.621 11.044 –10 1000.620 1500.930 3283.675 4.516 2269.599 4.829 6.773 8.362 –5 789.612 1184.418 2568.411 3.572 1775.225 3.777 5.358 6.389 0 627.752 941.628 2024.158 2.844 1399.050 2.977 4.266 4.922 5 502.474 753.711 1606.275 2.280 1110.220 2.362 3.419 3.825 10 405.010 607.514 1283.691 1.839 887.257 1.888 2.758 2.994 15 328.480 492.720 1032.245 1.492 713.463 1.518 2.238 2.361 20 268.044 402.066 835.351 1.218 577.375 1.229 1.827 1.876 25 220.000 330.000 680.000 1.000 470.000 1.000 1.500 1.500 30 181.576 272.365 556.733 0.825 384.800 0.819 1.238 1.207 35 150.668 226.002 458.287 0.685 316.757 0.674 1.027 0.978 40 125.681 188.521 379.320 0.571 262.177 0.558 0.857 0.797 45 105.336 158.004 315.504 0.479 218.069 0.464 0.718 0.653 50 88.717 133.076 263.749 0.403 182.297 0.388 0.605 0.538 55 75.059 112.588 221.579 0.341 153.150 0.326 0.512 0.446 60 63.777 95.666 186.998 0.290 129.249 0.275 0.435 0.371 65 54.415 81.622 158.499 0.247 109.551 0.233 0.371 0.311 70 46.631 69.946 134.960 0.212 93.281 0.199 0.318 0.261 75 40.115 60.172 115.383 0.182 79.750 0.170 0.274 0.221 80 34.637 51.955 99.029 0.157 68.446 0.146 0.236 0.187 85 30.013 45.019 85.356 0.136 58.996 0.126 0.205 0.160 90 26.110 39.165 73.839 0.119 51.036 0.109 0.178 0.137 95 22.790 34.186 64.140 0.104 44.332 0.094 0.155 0.117 100 19.957 29.935 55.905 0.091 38.640 0.082 0.136 0.101 105 17.541 26.312 48.888 0.080 33.790 0.072 0.120 0.088 110 15.453 23.180 42.918 0.070 29.664 0.063 0.105 0.076 115 13.663 20.494 37.795 0.062 26.123 0.056 0.093 0.067 120 12.114 18.171 33.409 0.055 23.091 0.049 0.083 0.058 125 10.778 16.168 29.618 0.049 20.472 0.044 0.074 0.051 Part Number NCPppXM222 NCPppXW222 NCPppXM332 NCPppXW332 NCPppXM472 NCPppXW472 NCPppXH682 NCPppXW682 3.3kΩ 4.7kΩ 3.3kΩ 2.2kΩ 4.7kΩ Resistance 2.2kΩ 6.8kΩ 6.8kΩ 3950K 3950K 3500K 3500K 3500K 3950K B-Constant 3380K 3950K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) 162.279 70.179 –40 46.786 105.705 75.961 133.043 234.787 113.941 116.474 53.295 –35 35.530 79.126 54.520 100.756 168.515 81.779 84.615 40.743 –30 27.162 59.794 39.607 77.076 122.422 59.411 62.173 31.360 –25 20.907 45.630 29.103 59.540 89.953 43.654 46.147 24.304 –20 16.203 35.144 21.601 46.401 66.766 32.401 34.604 18.966 –15 12.644 27.303 16.198 36.482 50.066 24.297 26.200 14.901 –10 9.934 21.377 12.264 28.904 37.906 18.396 20.018 11.787 –5 7.858 16.869 9.370 23.047 28.963 14.055 10.829 15.423 9.386 0 6.257 13.411 7.219 18.509 22.313 8.414 11.984 7.523 5 5.015 10.735 5.609 14.974 17.338 6.586 9.380 6.067 10 4.045 8.653 4.391 12.189 13.571 5.195 7.399 4.924 15 3.283 7.018 3.463 9.978 10.705 4.126 5.877 4.019 20 2.680 5.726 2.751 8.215 8.503 3.300 4.700 3.300 25 2.200 4.700 2.200 6.800 6.800 2.656 3.783 2.724 30 1.816 3.879 1.771 5.654 5.474 2.152 3.064 2.260 35 1.507 3.219 1.434 4.725 4.434 1.753 2.497 1.885 40 1.257 2.685 1.169 3.967 3.613 1.437 2.046 1.580 45 1.053 2.250 0.958 3.344 2.961 1.184 1.686 1.331 50 0.887 1.895 0.789 2.829 2.440 0.981 1.397 1.126 55 0.751 1.604 0.654 2.404 2.022 0.817 1.164 0.957 60 0.638 1.363 0.545 2.050 1.683 0.684 0.974 0.816 65 0.544 1.163 0.456 1.759 1.409 0.575 0.819 0.700 70 0.466 0.996 0.383 1.515 1.185 0.486 0.692 0.602 75 0.401 0.857 0.324 1.309 1.001 0.412 0.587 0.520 80 0.346 0.740 0.275 1.135 0.849 0.351 0.500 0.450 85 0.300 0.641 0.234 0.988 0.724 0.301 0.428 0.392 90 0.261 0.558 0.200 0.862 0.620 0.258 0.368 0.342 95 0.228 0.487 0.172 0.755 0.532 0.223 0.318 0.299 100 0.200 0.426 0.149 0.662 0.459 0.193 0.275 0.263 105 0.175 0.375 0.129 0.583 0.398 0.168 0.239 0.232 110 0.155 0.330 0.112 0.515 0.346 0.146 0.208 115 0.205 0.137 0.292 0.098 0.457 0.302 0.128 0.182 120 0.182 0.121 0.259 0.085 0.406 0.264 0.113 0.160 125 0.162 0.108 0.230 0.075 0.361 0.232 Continued on the following page. 14 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCpppXH103D NCpppXH103 NCPppXV103 NCPppXH153 NCPppXW153 NCPppXH223 NCPppXW223 NCPppWL223 10kΩ±0.5% 10kΩ Resistance 10kΩ 15kΩ 15kΩ 22kΩ 22kΩ 22kΩ 3380K 3900K 3380K B-Constant 3950K 3380K 3950K 3380K 4485K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) 197.390 195.652 –40 293.478 517.912 759.605 1073.436 430.434 328.996 149.390 148.171 –35 222.256 371.724 545.196 753.900 325.976 237.387 114.340 113.347 –30 170.021 270.048 396.070 535.073 249.364 173.185 88.381 87.559 –25 131.338 198.426 291.025 383.590 192.629 127.773 68.915 68.237 –20 102.355 147.278 216.008 277.643 150.121 95.327 54.166 53.650 –15 80.474 110.439 161.977 202.813 118.029 71.746 42.889 42.506 –10 63.759 83.617 122.638 149.462 93.514 54.564 34.196 33.892 –5 50.838 63.888 93.702 111.082 74.563 41.813 27.445 27.219 0 40.828 49.221 72.191 83.233 59.881 32.330 22.165 22.021 5 33.032 38.245 56.093 62.858 48.446 25.194 18.010 17.926 10 26.888 29.936 43.907 47.831 39.436 19.785 14.720 14.674 15 22.010 23.613 34.633 36.664 32.282 15.651 12.099 12.081 20 18.121 18.756 27.509 28.304 26.577 12.468 10.000 10.000 25 15.000 15.000 22.000 22.000 22.000 10.000 8.072 8.309 8.315 30 12.472 12.074 17.709 17.214 18.292 6.556 6.939 6.948 35 10.422 9.780 14.344 13.557 15.285 5.356 5.824 5.834 40 8.751 7.969 11.688 10.744 12.834 4.401 4.911 4.917 45 7.375 6.531 9.578 8.566 10.817 3.635 4.160 4.161 50 6.241 5.382 7.894 6.871 9.154 3.019 3.539 3.535 55 5.302 4.459 6.540 5.544 7.777 2.521 3.024 3.014 60 4.521 3.713 5.446 4.498 6.631 2.115 2.593 2.586 65 3.879 3.108 4.559 3.669 5.690 1.781 2.233 2.228 70 3.341 2.613 3.832 3.009 4.901 1.509 1.929 1.925 75 2.887 2.208 3.239 2.479 4.234 1.284 1.673 1.669 80 2.503 1.873 2.748 2.052 3.671 1.097 1.455 1.452 85 2.178 1.597 2.342 1.707 3.195 0.941 1.270 1.268 90 1.902 1.367 2.004 1.426 2.790 0.810 1.112 1.110 95 1.664 1.174 1.722 1.196 2.441 0.701 0.976 0.974 100 1.461 1.013 1.486 1.008 2.142 0.608 0.860 0.858 105 1.287 0.878 1.287 0.852 1.888 0.530 0.759 0.758 110 1.137 0.763 1.119 0.724 1.668 0.463 0.673 0.672 115 1.007 0.665 0.975 0.617 1.477 0.406 0.598 0.596 120 0.895 0.582 0.854 0.528 1.312 0.358 0.532 0.531 125 0.797 0.511 0.750 0.454 1.169 Part Number NCPppWB333 NCPppWF333 NCPppWL333 NCpppWB473D NCpppWB473 NCPppWL473 NCPppWD683 NCPppWF683 47kΩ±0.5% Resistance 47kΩ 33kΩ 33kΩ 47kΩ 33kΩ 68kΩ 68kΩ 4050K B-Constant 4050K 4485K 4050K 4485K 4250K 4250K 4150K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) 1690.586 1747.920 1610.154 2293.249 1227.263 –40 1451.049 2990.041 2735.359 1215.318 1245.428 1130.850 1610.605 874.449 –35 1019.238 2100.247 1937.391 882.908 898.485 802.609 1143.110 630.851 –30 725.084 1494.113 1389.345 647.911 655.802 575.385 819.487 460.457 –25 522.021 1075.679 1008.014 480.069 483.954 416.464 593.146 339.797 –20 379.842 782.705 738.978 359.009 360.850 304.219 433.281 253.363 –15 279.371 575.674 547.456 270.868 271.697 224.193 319.305 190.766 –10 207.566 427.712 409.600 206.113 206.463 166.623 237.312 144.964 –5 155.639 320.710 309.217 158.126 158.214 124.850 177.816 111.087 0 117.814 242.768 235.606 122.267 122.259 94.287 134.287 85.842 5 89.925 185.300 180.980 95.256 95.227 71.747 102.184 66.861 10 69.204 142.603 140.139 74.754 74.730 54.996 78.327 52.470 15 53.675 110.602 109.344 59.075 59.065 42.455 60.467 41.471 20 41.937 86.415 85.929 47.000 47.000 33.000 47.000 33.000 25 33.000 68.000 68.000 37.636 37.643 25.822 36.776 26.430 30 26.143 53.871 54.167 30.326 30.334 20.335 28.962 21.298 35 20.845 42.954 43.421 24.583 24.591 16.115 22.952 17.266 40 16.723 34.460 35.016 20.043 20.048 12.849 18.301 14.076 45 13.498 27.814 28.406 16.433 16.433 10.306 14.679 11.538 50 10.954 22.572 23.166 13.545 13.539 8.317 11.845 9.506 55 8.940 18.422 18.997 11.223 11.209 6.748 9.610 7.870 60 7.334 15.113 15.657 9.345 9.328 5.504 7.839 6.549 65 6.046 12.459 12.967 7.818 7.798 4.513 6.427 5.475 70 5.011 10.325 10.794 6.571 6.544 3.718 5.296 4.595 75 4.170 8.592 9.021 5.548 5.518 3.078 4.384 3.874 80 3.487 7.185 7.575 4.704 4.674 2.560 3.646 3.282 85 2.928 6.033 6.387 4.004 3.972 2.139 3.046 2.789 90 2.469 5.087 5.407 3.422 3.388 1.794 2.555 2.379 95 2.091 4.309 4.598 2.936 2.902 1.511 2.152 2.038 100 1.777 3.661 3.922 2.528 2.494 1.278 1.820 1.751 105 1.516 3.124 3.359 2.184 2.150 1.085 1.546 1.509 110 1.298 2.675 2.887 1.893 1.860 0.925 1.318 1.306 115 1.116 2.299 2.489 1.646 1.615 0.792 1.128 1.134 120 0.962 1.983 2.155 1.436 1.406 0.681 0.970 0.987 125 0.832 1.715 1.870 Continued on the following page. 15 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppWL683 NCpppWF104D NCpppWF104 NCPppWL104 NCPppWL154 NCpppWM154 NCPppWL224 NCpppWM224 220kΩ Resistance 100kΩ±0.5% 150kΩ 100kΩ 100kΩ 220kΩ 150kΩ 68kΩ 4500K B-Constant 4250K 4500K 4250K 4485K 4485K 4485K 4485K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) –40 4397.119 11585.884 4879.254 10734.358 7318.881 3317.893 7899.466 4221.283 –35 3088.599 8016.973 3426.818 7539.001 5140.228 2330.237 5466.118 2995.044 –30 5623.931 2197.225 2432.149 5350.729 3648.224 1653.862 3834.499 2146.996 –25 3990.100 1581.881 1743.590 3835.898 2615.385 1185.641 2720.523 1554.599 –20 2861.784 1151.037 1262.012 2776.427 1893.018 858.168 1951.216 1136.690 –15 2076.162 846.579 921.875 2028.126 1382.813 626.875 1415.565 839.019 –10 1520.909 628.988 679.373 1494.620 1019.059 461.974 1036.984 624.987 –5 1125.049 471.632 504.919 1110.822 757.379 343.345 767.079 469.678 0 839.912 357.012 378.333 832.332 567.499 257.266 572.667 355.975 5 632.521 272.500 285.717 628.577 428.575 194.287 431.264 272.011 10 480.194 209.710 217.414 478.310 326.121 147.841 327.405 209.489 15 367.455 162.651 166.654 366.639 249.981 113.325 250.538 162.559 20 283.310 127.080 128.653 283.036 192.979 87.484 193.166 127.057 25 220.000 100.000 100.000 220.000 150.000 68.000 150.000 100.000 30 172.012 79.222 78.247 172.143 117.370 53.208 117.281 79.222 35 135.364 63.167 61.622 135.569 92.433 41.903 92.293 63.167 40 107.198 50.677 48.835 107.436 73.252 33.208 73.090 50.677 45 85.419 40.904 38.937 85.662 58.406 26.477 58.240 40.904 50 68.441 33.195 31.231 68.708 46.846 21.237 46.665 33.195 55 55.153 27.091 25.202 55.444 37.803 17.137 37.605 27.091 60 44.665 22.224 20.448 44.984 30.671 13.904 30.453 22.224 65 36.379 18.323 16.679 36.694 25.018 11.342 24.804 18.323 70 29.763 15.184 13.675 30.085 20.513 9.299 20.293 15.184 75 24.462 12.635 11.268 24.789 16.902 7.662 16.679 12.635 80 20.205 10.566 9.329 20.523 13.993 6.343 13.776 10.566 85 16.761 8.873 7.758 17.068 11.638 5.276 11.428 8.873 90 13.962 7.481 6.481 14.258 9.721 4.407 9.520 7.481 95 11.684 6.337 5.437 11.961 8.155 3.697 7.966 6.337 100 9.809 5.384 4.580 10.075 6.869 3.114 6.688 5.384 105 8.270 4.594 3.873 8.521 5.810 2.634 5.639 4.594 110 6.998 3.934 3.289 7.236 4.933 2.236 4.772 3.934 115 5.942 3.380 2.804 6.169 4.206 1.907 4.052 3.380 120 5.067 2.916 2.400 5.281 3.601 1.632 3.454 2.916 125 4.334 2.522 2.064 4.540 3.096 1.403 2.955 2.522 Part Number NCPppWF474 NCpppWM474 Resistance 470kΩ±1% 470kΩ B-Constant 4250K 4500K Temp. (°C) Resistance (kΩ) Resistance (kΩ) 18632.4186 24751.661 –40 13322.1161 17127.169 –35 9596.7223 12014.762 –30 7012.1677 8524.305 –25 5148.6454 6113.811 –20 3837.2457 4435.437 –15 2870.6987 3249.216 –10 2177.2734 2403.515 –5 1657.5649 1794.358 0 1271.5627 1351.294 5 980.9354 1025.870 10 762.8640 785.018 15 596.7998 605.252 20 470.0000 470.000 25 372.5499 367.480 30 297.1820 289.186 35 238.3762 229.014 40 192.4150 182.485 45 156.0147 146.215 50 127.2622 117.828 55 104.1000 95.420 60 85.7325 77.718 65 70.8958 63.584 70 58.9516 52.260 75 49.1468 43.166 80 41.1989 35.808 85 34.6905 29.828 90 29.3049 24.961 95 24.8835 20.955 100 21.2079 17.668 105 18.1119 14.951 110 15.5330 12.695 115 13.3419 10.824 120 11.5013 9.259 125 16 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor and Compensation Chip Type !Caution/Notice !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product. Notice (Storage and Operating Conditions) To keep the solderability of the product from degrading, the following storage conditions are recommended. 1. Storage condition: Temperature -10 to +40°C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. Notice (Handling) The ceramic of this product is fragile, and care must be taken not to load an excessive press-force or to cause a shock at handling. Such forces may cause cracking or chipping. 17 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 Temperature Sensor and Compensation Chip Type !Caution/Notice Notice (Soldering and Mounting) 1. Mounting Position Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. Component Direction Locate this product horizontal to the direction in which stress acts. Mounting Close to Board Separation Line C Perforation Holes A (a) Solder within the temperature and time combinations indicated by the slanted lines in the following graphs. (b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure below. (For example, Reflow peak temperature: 260°C, twice -> The total accumulated soldering time at 260°C is within 30sec.) D Slit Keep this product on the PC Board away from the Separation Line. Worst ← A-C-B-D → Better NCP03/15 Series, NCU15 Series Allowable Reflow Soldering Temp. and Time 280 Temperature (°C) 2. Allowable Soldering Temperature and Time B 270 260 250 240 230 220 0 10 20 30 40 50 60 70 80 90 Time (sec.) NCP18 Series, NCU18 Series Allowable Reflow Soldering Temp. and Time 280 280 270 270 Temperature (°C) Temperature (°C) Allowable Flow Soldering Temp. and Time 260 250 240 230 220 210 260 250 240 230 220 210 0 10 20 Time (sec.) 30 0 10 20 30 40 50 60 70 80 90 100110 Time (sec.) Continued on the following page. 18 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. (a) Insufficient preheating may cause a crack on the ceramic body. The difference between preheating temperature and maximum temperature in the profile shall be 100 °C. (b) Rapid cooling by dipping in solvent or by other means is not recommended. NCP03/15 Series, NCU15 Series Reflow Soldering Conditions Temperature (°C) 3. Recommended Temperature Profile for Soldering 300 Preheating (in air) Soldering 1-2min. *20sec. Gradual Cooling (in air) 200 100 0 * In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure of section 2. Preheating: 160±10°C, 1-2min. Soldering: 240-260°C, 20sec. NCP18 Series, NCU18 Series 300 Preheating (in air) Reflow Soldering Conditions Gradual Cooling Soldering (in air) Temperature (°C) Temperature (°C) Flow Soldering Conditions 200 100 0 1-2min. Soldering 1-2min. *20sec. Gradual Cooling (in air) 200 100 0 *10sec. Preheating (in air) 300 Preheating: 160±10°C, 1-2min. Soldering: 230-260°C, 10sec. Preheating: 160±10°C, 1-2min. Soldering: 230-260°C, 20sec. 4. Solder and Flux (1) Solder and Paste (a) Reflow Soldering: NCP03/15/18 Series, NCU15/18 Series For your reference, we use the solder paste below for any internal tests of this product. aM705-GRM360-K2-V (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%) (Manufactured by Senju Metal Industry Co., Ltd.) (b) Flow Soldering: NCP18 Series, NCU18 Series We use the solder paste below for any internal tests of this product. aSn:Ag:Cu=96.5wt%:3.0wt%:0.5wt% (2) Flux Use rosin type flux in the soldering process. If the flux listed below is used, some problems might be caused in the product characteristics and reliability. Please do not use the following flux. a Strong acidic flux (with halide content exceeding 0.1wt%). a Water-soluble flux (*Water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.) 5. Cleaning Conditions For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality. a Please keep mounted parts and a substrate from an occurrence of resonance in ultrasonic cleaning. a Please do not clean the products in the case of using a non-wash-type flux. NCP03/15, NCU15 NCP18, NCU18 Solvent Isopropyl Alcohol Isopropyl Alcohol Dipping Cleaning Less than 5min. at room temp. or less than 2min. at 40°C max. Less than 5min. at room temp. or less than 2min. at 40°C max. Ultrasonic Cleaning Less than 5min. and 20W/ Frequency of 28kHz to 40kHz Less than 1min. and 20W/ Frequency of several 10kHz to 100kHz 6. Drying After cleaning, promptly dry this product. Continued on the following page. 19 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 Temperature Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. 7. Printing Conditions of Solder Paste Reference: Optimum Solder Amount o The amount of solder is critical. Standard height of fillet is shown in the table below. o Too much solder may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage. E T Electrode Solder Solder Part Number Solder Paste Thickness NCP03 100μm NCP15, NCU15 150μm NCP18, NCU18 200μm 8. Adhesive Application and Curing o Thin or insufficient adhesive may result in loose component contact with land during flow soldering. o Low viscosity adhesive causes chips to slip after mounting. 20 T 1/3E< =T< =E 1/3E< =T< =E 0.2mm< =T< =E R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 Temperature Sensor and Compensation Chip Type Package Taping Dimensions Minimum Quantity Guide Part Number Quantity (pcs.) Paper Tape NCP03 15,000 NCP15, NCU15 10,000 NCP18, NCU18 4,000 Embossed Tape - Tape Carrier Packaging 1. Dimensions of Reel 2.0±0.5 ø60 +1.0 –0 ø13.0±0.2 ø21.0±0.8 +1.0 9.0–0 +0 ø180–1.5 (in mm) 2. Taping Method (1) A tape in a reel contains Leader unit and Trailer unit where products are not packed. (Please refer to the figure at the Leader Unit 190-250 210-250 40 min. Trailer Unit Vacant Section Top Tape alone Cover Tape alone right.) (2) The top and base tapes or plastic and cover tape are not Chip-mounting Unit stuck at the first five pitches minimum. (3) A label should be attached on the reel. (MURATA's part number, inspection number and quantity should be marked on the label.) Direction of Feed (in mm) (4) Taping reels are packed in a package. Continued on the following page. 21 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 Temperature Sensor and Compensation Chip Type Package Taping Dimensions Continued from the preceding page. 3. Paper Tape (NCP03/15/18 Series, NCU15/18 Series) 0.8 max. 0.38* 8.0±0.3 ø1.5+0.1/–0 1.15* 8.0±0.3 0.68* 2.0±0.05 4.0±0.1 0.5 max. 3.5±0.05 1.75±0.1 ø1.5+0.1/–0 3.5±0.05 2.0±0.05 4.0±0.1 1.75±0.1 NCP15, NCU15 Series NCP03 Series 0.65* Direction of Feed Direction of Feed * Reference Value * Reference Value 1.1 max. 1.85* 8.0±0.3 ø1.5+0.1/–0 3.5±0.05 2.0±0.05 4.0±0.1 4.0±0.1 1.75±0.1 NCP18, NCU18 Series 1.05* Direction of Feed * Reference Value (in mm) (1) Other Conditions (a) Packaging Products are packaged in the cavity of the base tape and sealed by a top tape and bottom tape. (b) Tape The top tape and bottom tape have no joints and products are packaged and sealed in the cavity of the base tape, continuously. (2) Peeling Force of Top Tape 165-180° F * 1 Peeling angle: 165 to 180° against the fixed surface of tape. * 2 Peeling speed: 300mm/min. * 3 Peeling force: 0.1 - 0.6N (3) Pull Strength Pull strength of top tape is specified at 10N minimum. Pull strength of bottom tape should be specified 5N minimum. 22 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistors Temperature Sensor Thermo String Cooper Wire Type 1.2±0.4 1.2±0.4 This product is a small flexible lead type NTC Thermistor with a small head and a thin lead wire. 60 to 100±2 110 to 150±3 Features NXFT15_1B Type (twist) 1.2±0.4 1.2±0.4 60 to 100±2 110 to 150±3 4 ø0.30±0.05 3+2/-1 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits NXFT15XM202EApBppp (in mm) The full length 60mm to 150mm interval 10mm. Applications Part Number ø0.30±0.05 3+2/-1 1. This small and highly accurate NTC Thermistor provides extremely precise temperature sensing. 2. The small sensing head and thin lead wire deliver temperature sensing in a narrow space. 3. Flexibility and a wide variety of lengths (60mm to 150mm) enable the design of flexible temperature sensing architectures. 4. This product is compatible with our 0402 (EIA) size chip Thermistor. 5. Excellent long-term stability 6. This is a halogen free product. * * Cl= max.900ppm, Br=max.900ppm and Cl+Br=max.1500ppm 7. NXFT series are recognized by UL/cUL. (UL1434, File No.E137188). The full length 60mm to 150mm interval 10mm. (in mm) NXFT15_2B Type (without twist) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/nxf Resistance B-Constant B-Constant B-Constant B-Constant Maximum Operating Rated Electric Typical Dissipation Thermal Time (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) 2k±3% 3500±1% 3539 3545 3560 0.27 7.5 1.5 4 NXFT15XV302FApBppp 3k±1% 3936±1% 3971 3977 3989 0.22 7.5 1.5 4 NXFT15XH103FApBppp 10k ±1% 3380 ±1% 3428 3434 3455 0.12 7.5 1.5 4 NXFT15XV103FApBppp 10k ±1% 3936 ±1% 3971 3977 3989 0.12 7.5 1.5 4 NXFT15WB473FApBppp 47k ±1% 4050 ±1% 4101 4108 4131 0.06 7.5 1.5 4 NXFT15WF104FApBppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4 p is filled with lead shape (1: twist, 2: without twist). ppp is filled with Total-length codes. (60 to 150mm interval 10mm, ex. 060=60mm) Maximum Operating Current rises Thermistor's temperature by 0.1°C Rated Electric Power shows the required electric power that the thermistor's temperature rise to 30°C by self-heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 23 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistors Temperature Sensor Thermo String Nickel Copper Wire Type 1.2±0.4 1.2±0.4 This product is a small flexible lead type NTC Thermistor with a small head and a thin lead wire. 4 21.0 to 50.0±2 Features ø0.30±0.05 3+2/-1 1. This small and highly accurate NTC Thermistor provides extremely precise temperature sensing. Nickel Copper Wire Type has high thermal response than the Cooper Wire Type. 2. The small sensing head and thin lead wire deliver temperature sensing in a narrow space. 3. Flexibility and a wide variety of lengths (21mm to 50mm) enable the design of flexible temperature sensing architectures. 4. This product is compatible with our 0402 (EIA) size chip Thermistor. 5. Excellent long-term stability 6. This is a halogen free product. * * Cl= max.900ppm, Br=max.900ppm and Cl+Br=max.1500ppm 7. NXFT series are recognized by UL/cUL. (UL1434, File No.E137188). The full length 21mm, 25 to 50mm interval 5mm. (in mm) NXFT15_AB Type (without twist) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/nxf Applications 1. Temperature compensation for transistors, ICs, and crystal oscillators in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance B-Constant B-Constant B-Constant B-Constant Maximum Operating Rated Electric Typical Dissipation Thermal Time (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) NXFT15XV302FEABppp 3k±1% 3936±1% 3971 3977 3989 0.14 3 0.6 NXFT15XV502FEABppp 5k±1% 3936±1% 3971 3977 3989 0.11 3 0.6 3 NXFT15XH103FEABppp 10k±1% 3380±1% 3428 3434 3455 0.077 3 0.6 3 NXFT15XV103FEABppp 10k±1% 3936±1% 3971 3977 3989 0.077 3 0.6 3 NXFT15WB473FEABppp 47k±1% 4050±1% 4101 4108 4131 0.036 3 0.6 3 NXFT15WF104FEABppp 100k±1% 4250±1% 4303 4311 4334 0.024 3 0.6 3 ppp is filled with Total-length codes. (21mm, 25 to 50mm interval 5mm, ex. 050=50mm) Maximum Operating Current rises Thermistor's temperature by 0.1°C Rated Electric Power shows the required electric power that the thermistor's temperature rise to 30°C by self-heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 24 3 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor Thermo String Type Specifications and Test Methods No. Item Specifications Except XM202&XV302 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 Humidity Storage Test 4 Temperature Cycle 5 High Temperature Load 6 Insulation Break down Voltage · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · Resistance (R25°C) fluctuation rate: less than ±2%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. Test Methods XM202&XV302 · Resistance (R25°C) fluctuation rate: less than ±3%. · B-Constant (B25/50°C) fluctuation rate: less than ±2%. 125±2°C in air, for 1000 +48/-0hrs. without loading. · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. -40 +0/-3°C in air, for 1000 +48/-0hrs. without loading. · Resistance (R25°C) fluctuation rate: less than ±2%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 60±2°C, 90 to 95%RH in air, for 1000 +48/-0hrs. without loading. · Resistance (R25°C) fluctuation rate: less than ±3%. · B-Constant (B25/50°C) fluctuation rate: less than ±2%. -40 +0/-3°C, 30min. in air +25±2°C, 10 to 15min. in air +125±2°C, 30min. in air +25 +2/-0°C, 10 to 15min. in air (1 cycle) Continuous 100 cycles, without loading. · Resistance (R25°C) fluctuation rate: less than ±3%. · B-Constant (B25/50°C) fluctuation rate: less than ±2%. 85±2°C in air, with 'Operating Current for Sensor' for 1000 +48/-0hrs. · No damage electrical characteristics at DC100 V, 1min. 2mm length of coating resin from the top of Thermistor is to be dipped into beads of lead (Pb), and DC100V 1min. is applied to circuit between beads of lead (Pb) and lead wire. 4 Both lead wires are dipped into 350±10°C solder for 3.5±0.5sec., or 260±5°C solder for 10±1sec. according to Fig-1 (solder ). 7 Resistance to Soldering Heat · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 1 to 2mm Solder Fig-1 8 Solderability More than 90% of lead wire surface shall be covered by solder. Both lead wires are dipped into flux (25wt% colophony isopropyl alcohol ) for 5 to 10sec. Then both lead wires are dipped into 245±5°C solder for 2±0.5sec. according to Fig-1. The lead wire shall be inserted in a ø1.0mm hole until resin part contacts with a substrate as shown in Fig.-2, and 1N force for 10sec. shall be applied to the lead wire. 9 Lead Wire Pull Strength · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 1N (10sec.) Fig-2 * · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1hr. at room temperature (normal humidity and normal atmospheric pressure). Continued on the following page. 25 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 Temperature Sensor Thermo String Type Specifications and Test Methods Continued from the preceding page. No. Item Specifications Test Methods Hold the lead wires as in Fig-3. Bend by 90 degrees and again bend back to the initial position. Then bend to the other side by 90 degrees and again bend back to the initial position. After bending process, 10N force for 3sec. shall be applied to the lead wire. 10 Lead Wire Bending Strength · Lead wire does not break. 10N (3 sec.) Fig-3 NTC Thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. 11 Free Fall NTC Thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, Frequency sequence of 10Hz - 55Hz - 10Hz in 1min. shall be applied for right angled 3 directions for 2hrs. duration each. 4 12 Vibration · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · No visible damage at resin part. Mount Oscillating Direction Z Solder is attached from the reverse side. Oscillating Direction Y Oscillating Direction X * · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1hr. at room temperature (normal humidity and normal atmospheric pressure). 26 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistors Temperature Sensor Lead Type 4.0 max. 2.0 max. This thermistor is for normal temperature level sensors having self-subsistence due to strong lead strength based on chip NTC. 10.0 to 50.0±1.0 Features 1. This highly accurate NTC Thermistor provides extremely precise temperature sensing. 2. This product is compatible with 1005 (1.0mm x 0.5mm) size NTC Thermistor. 3. The variation per hour of this product is highly stable. 4. This product is produced with an automation line that was consistent from lead to packaging so that a product of uniform quality may be obtained at low cost in large quantities. 5. Since this product has strong lead intensity with original lead mounting technique, it is bent at the time of use and can withstand processing, etc., readily. Taping package can be supported. 2.5±1 ø0.40±0.05 The full length 10.0 to 50.0mm interval 10.0mm (in mm) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/nxr Applications 1. For temperature detection of a rechargeable battery pack 2. For temperature detection of a charge circuit 3. For temperature detection of a printer head 4. For temperature detection of a DC fan motor 5. For temperature detection of home electronics Part Number 5 Resistance B-Constant B-Constant B-Constant B-Constant Maximum Operating Rated Electric Typical Dissipation Thermal Time (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) NXRT15XM202EA1Bppp 2k ±3% 3500 ±1% 3539 3545 3560 0.27 7.5 1.5 4 NXRT15XV302FA1Bppp 3k ±1% 3936 ±1% 3971 3977 3989 0.22 7.5 1.5 4 NXRT15XV502FA1Bppp 5k ±1% 3936 ±1% 3971 3977 3989 0.17 7.5 1.5 4 NXRT15XH103FA1Bppp 10k ±1% 3380 ±1% 3428 3434 3455 0.12 7.5 1.5 4 NXRT15XV103FA1Bppp 10k ±1% 3936 ±1% 3971 3977 3989 0.12 7.5 1.5 4 NXRT15WB333JA1Bppp 33k ±5% 4050 ±3% 4101 4108 4131 0.07 7.5 1.5 4 NXRT15WB473FA1Bppp 47k ±1% 4050 ±1% 4101 4108 4131 0.06 7.5 1.5 4 NXRT15WF104FA1Bppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4 ppp is filled with Total-length codes. (10 to 50mm interval 10mm, ex. 040=40mm) Maximum Operating Current rises Thermistor's temperature by 0.1°C. Rated Electric Power is necessary electric power that thermistor's temperature rises 5°C by self-heating at 25°C in still air. Taping type of part numbers with "3A016" is available (Lead Spacing=5mm). Operating Temperature Range: -40°C to +125°C 27 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor Lead Type Specifications and Test Methods No. Item Specifications Test Methods 1 Low Temperature Storage Test 2 High Temperature Storage Test 3 High Temperature Load 85±2°C in air, with ‘Operating Current for Sensor’ for 1000 +48/-0hrs. 4 Humidity Storage Test 60±2°C, 90 to 95%RH in air, for 1000 +48/-0hrs. without loading. 5 Temperature Cycle 6 Insulation Break down Voltage · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · Resistance (R25°C) fluctuation rate: less than ±2%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · No damage electrical characteristics on D.C.100 V, 1min. -40 +0/-3°C in air, for 1000 +48/-0hrs. without loading. 125±2°C in air, for 1000 +48/-0hrs. without loading. -40°C +0/-3°C, 30min. in air +25°C±2°C, 10 to 15min. in air +125°C +3/-0°C, 30min. in air +25°C +2/-0°C, 10 to 15min. in air (1 cycle) Continuous 100 cycles, without loading. 2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1min. is applied to circuit between beads of lead (Pb) and lead wire. Both lead wires are dipped into 350±10°C solder for 3.5±0.5sec., or 260±5°C solder for 10±1sec. according to Fig-1. (solder ) 7 Resistance to Soldering Heat · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. Solder Fig-1 5 8 Solderability · More than 90% of lead wire surface shall be covered by solder. Both lead wires are dipped into flux (25wt% colophony isopropyl alcohol ) for 5 to 10 sec. Then both lead wires are dipped into 245±5°C solder for 2±0.5sec. according to Fig-1. One end of a lead wire shall be fixed and 2.5N force for 10sec. shall be applied to the other lead wire as shown in Fig-2. 9 Lead Wire Pull Strength · Resistance(R25°C) fluctuation rate: less than ±1%. · B-Constant(B25/50°C) fluctuation rate: less than ±1%. · No visible damage at resin part. 2.5N (10sec.) Fig-2 One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90° and again bent back to the initial position. This sequence shall be completed twice. See Fig-3. 10 Lead Wire Bending Strength · Lead wire does not break. 90° 2.5N Fig-3 11 Free Fall 12 Vibration · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · No visible damage at resin part. NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. NTC thermistor shall be fixed to the vibration test Equipment. Vibration of total 1.5mm amplitude, Frequency sequence of 10Hz – 55Hz – 10Hz in 1min., shall be applied for right angled 3 directions for 2hrs. duration each. * · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C-50°C. · After each test, NTC Thermistor should be kept for 1hr. at room temperature (normal humidity and normal atmospheric pressure). 28 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Mar.6,2020 NTC Thermistors Temperature Sensor Lead Insulation Type 4.0 max. (5.0mm) A 2.5±1.0 Features B 1. NXR series can accurately detect temperature with NCP15 series on the head of parts. 2. The insulation coat with polyulethane on the surface of lead wire : 100VDC. 3. You can choose NTC characteristics from NCP15 series. 4. The resistance drift is low in the reliability test. 5. The production capacity is bigger and NXR is produced almost entirely in an automation line. 6. Adopt to Sb regulation 25.0 to 50.0±1.0 This thermistor is for normal temperature level sensors having self-subsistence due to strong lead strength based on chip NTC. 2.0 max. 0.46±0.05 The full length 25.0 to 50.0mm interval 5.0mm A: Epoxy Resin B: Copper Lead Wire with Polyurethane Coat (in mm) Detailed are accessable from the following URL. https://www.murata.com/en-global/products/thermistor/ntc/nxr Applications 1. Secondary battery 2. Temperature detection for charging 3. Temperature detection for DC fan motor 4. Temperature sensing for appliance 5. Self-standing temperature sensing for fire detector Part Number Resistance B-Constant B-Constant B-Constant B-Constant Maximum Operating Rated Electric Typical Dissipation Thermal Time (25°C) (25-50°C) (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) Constant (ohm) (K) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) NXRT15XM202EA5Bppp 2k ±3% 3500 ±1% 3539 3545 3560 0.36 13 2.6 4 NXRT15XV302FA5Bppp 3k ±1% 3936 ±1% 3971 3977 3989 0.29 13 2.6 4 NXRT15XV502FA5Bppp 5k ±1% 3936 ±1% 3971 3977 3989 0.23 13 2.6 4 NXRT15XH103FA5Bppp 10k ±1% 3380 ±1% 3428 3434 3455 0.16 13 2.6 4 NXRT15XV103FA5Bppp 10k ±1% 3936 ±1% 3971 3977 3989 0.16 13 2.6 4 NXRT15WB333JA5Bppp 33k ±5% 4050 ±3% 4101 4108 4131 0.08 13 2.6 4 NXRT15WB473FA5Bppp 47k ±1% 4050 ±1% 4101 4108 4131 0.07 13 2.6 4 NXRT15WF104FA5Bppp 100k ±1% 4250 ±1% 4303 4311 4334 0.05 13 2.6 4 6 ppp is fulled with Total-length codes. (25 to 50mm interval 5mm, ex. 030=30mm) Maximum Operating Current rises Thermistor's temperature by 0.1°C. Rated Electric Power is necessary electric power that thermistor's temperature rises 5°C by self-heating at 25°C in still air. Operating Temperature Range: -40°C to +125°C 29 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Temperature Sensor Lead Insulation Type Specifications and Test Methods No. Item Specifications Test Methods Both lead wires are dipped into 350±10°C solder for 3.5±0.5sec., or 260 ±5°C solder for 10±1sec. according to Fig-1. (solder ) 1 Resistance to Soldering Heat (Flow) · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. Solder 1 to 2mm Fig-1 2 Solderability (Flow) · More than 90% of lead wsire surface shall be covered by solder. Both lead wires are dipped into flux (25wt% colophony isopropyl alcohol ) for 5 to 10sec. Then both lead wire are dipped into 245±5°C solder for 2±0.5sec. according to Fig-1. One end of a lead wire shall be fixed and 2.5N force for 10sec. shall be applied to the other lead wire as shown in Fig-2. 3 Lead Wire Breaking Strength · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 2.5N (10sec.) Fig-2 One lead wire is held and 2.5N force is applied. Then the body of NTC thermistor is bent by 90° and again bent back to the initial position. This sequence shall be completed twice. See Fig-3. 4 Lead Wire Bending Strength · Lead wire does not break. 90° 6 2.5N Fig-3 5 Free Fall 6 Vibration 7 Cold 8 Dry Heat 9 High Temperature with Continuous Load 10 Damp Heat 11 · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. NTC thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, frequency sequence of 10Hz - 55Hz - 10Hz in 1min., shall be applied for right angled 3 directions for 2hrs. duration each. -40 +0/-3°C in air, for 1000 +48/-0hrs. without loading. 125±2°C in air, for 1000 +48/-0hrs. without loading. 85±2°C in air, with ‘Operating Current for Sensor’ for 1000 +48/-0hrs. · Resistance (R25°C) fluctuation rate: less than ±2%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. Change of Temperature Dielectric 12 Breakdown Voltage 30 · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · No visible damage at resin part. NTC thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. · No damage electrical characteristics on D.C.100V, 1min. 60±2°C, 90 to 95%RH in air, for 1000 +48/-0hrs. without loading. -40°C +0/-3°C, 30min. in air +25°C±2°C, 10 to 15min. in air +125°C +3/-0°C, 30min. in air +25°C +2/-0°C, 10 to 15min. in air (1 cycle) Continuous 100 +4/-0 cycles, without loading. 2mm length of coating resin from the top of thermistor is to be dipped into beads of lead (Pb), and DC100V 1min. is applied to circuit between beads of lead (Pb) and lead wire. Mar.6,2020 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor Thermo String/Lead Type Temperature Characteristics (Center Value) Part Number NXFT15XM202 NXFT15XV302 NXFT15XV502 NXFT15XH103 NXFT15XV103 NXFT15WB473 NXFT15WF104 Resistance 10kΩ 3kΩ 5kΩ 2kΩ 10kΩ 100kΩ 47kΩ B-Constant 3936K 3380K 4250K 3500K 3936K 3936K 4050K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) –40 195.652 4397.119 101.251 168.752 44.981 337.503 1747.920 –35 148.171 3088.599 73.000 121.666 33.671 243.332 1245.428 –30 113.347 2197.225 53.249 88.748 25.444 177.496 898.485 –25 87.559 1581.881 39.258 65.430 19.417 130.859 655.802 –20 68.237 1151.037 29.228 48.714 14.955 97.428 483.954 –15 53.650 846.579 21.969 36.615 11.619 73.230 360.850 –10 42.506 628.988 16.659 27.764 9.097 55.529 271.697 –5 33.892 471.632 12.740 21.233 7.178 42.467 206.463 0 27.219 357.012 9.824 16.374 5.707 32.747 158.214 5 22.021 272.500 7.635 12.725 4.568 25.450 122.259 10 17.926 209.710 5.980 9.966 3.682 19.932 95.227 15 14.674 162.651 4.718 7.864 2.986 15.727 74.730 20 12.081 127.080 3.749 6.249 2.437 12.498 59.065 25 10.000 100.000 3.000 5.000 2.000 10.000 47.000 30 8.315 79.222 2.416 4.027 1.651 8.054 37.643 35 6.948 63.167 1.959 3.264 1.370 6.529 30.334 40 5.834 50.677 1.597 2.662 1.143 5.324 24.591 45 4.917 40.904 1.310 2.183 0.958 4.366 20.048 50 4.161 33.195 1.080 1.801 0.807 3.601 16.433 55 3.535 27.091 0.896 1.493 0.682 2.985 13.539 60 3.014 22.224 0.746 1.244 0.580 2.488 11.209 65 2.586 18.323 0.625 1.041 0.495 2.083 9.328 70 2.228 15.184 0.526 0.876 0.424 1.752 7.798 75 1.925 12.635 0.444 0.740 0.365 1.480 6.544 80 1.669 10.566 0.377 0.628 0.315 1.256 5.518 85 1.452 8.873 0.321 0.535 0.273 1.070 4.674 90 1.268 7.481 0.275 0.458 0.237 0.916 3.972 95 1.110 6.337 0.236 0.394 0.207 0.787 3.388 100 0.974 5.384 0.204 0.340 0.181 0.679 2.902 105 0.858 4.594 0.177 0.294 0.160 0.588 2.494 110 0.758 3.934 0.154 0.256 0.141 0.512 2.150 115 0.672 3.380 0.134 0.223 0.124 0.446 1.860 120 0.596 2.916 0.117 0.195 0.110 0.391 1.615 125 0.531 2.522 0.103 0.172 0.098 0.343 1.406 Part Number NXRT15XM202 NXRT15XV302 NXRT15XV502 NXRT15XH103 NXRT15XV103 NXRT15WB333 NXRT15WB473 NXRT15WF104 2.0kΩ 3.0kΩ Resistance 10kΩ 10kΩ 5.0kΩ 100kΩ 33kΩ 47kΩ 3500K 3936K B-Constant 3380K 3936K 3936K 4250K 4050K 4050K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) –40 44.981 101.251 195.652 337.503 168.752 4397.119 1227.263 1747.920 –35 33.671 73.000 148.171 243.332 121.666 3088.599 874.449 1245.428 –30 25.444 53.249 113.347 177.496 88.748 2197.225 630.851 898.485 –25 19.417 39.258 87.559 130.859 65.430 1581.881 460.457 655.802 –20 14.955 29.228 68.237 97.428 48.714 1151.037 339.797 483.954 –15 11.619 21.969 53.650 73.230 36.615 846.579 253.363 360.850 –10 9.097 16.659 42.506 55.529 27.764 628.988 190.766 271.697 –5 7.178 12.740 33.892 42.467 21.233 471.632 144.964 206.463 0 5.707 9.824 27.219 32.747 16.374 357.012 111.087 158.214 5 4.568 7.635 22.021 25.450 12.725 272.500 85.842 122.259 10 3.682 5.980 17.926 19.932 9.966 209.710 66.861 95.227 15 2.986 4.718 14.674 15.727 7.864 162.651 52.470 74.730 20 2.437 3.749 12.081 12.498 6.249 127.080 41.471 59.065 25 2.000 3.000 10.000 10.000 5.000 100.000 33.000 47.000 30 1.651 2.416 8.315 8.054 4.027 79.222 26.430 37.643 35 1.370 1.959 6.948 6.529 3.264 63.167 21.298 30.334 40 1.143 1.597 5.834 5.324 2.662 50.677 17.266 24.591 45 0.958 1.310 4.917 4.366 2.183 40.904 14.076 20.048 50 0.807 1.080 4.161 3.601 1.801 33.195 11.538 16.433 55 0.682 0.896 3.535 2.985 1.493 27.091 9.506 13.539 60 0.580 0.746 3.014 2.488 1.244 22.224 7.870 11.209 65 0.495 0.625 2.586 2.083 1.041 18.323 6.549 9.328 70 0.424 0.526 2.228 1.752 0.876 15.184 5.475 7.798 75 0.365 0.444 1.925 1.480 0.740 12.635 4.595 6.544 80 0.315 0.377 1.669 1.256 0.628 10.566 3.874 5.518 85 0.273 0.321 1.452 1.070 0.535 8.873 3.282 4.674 90 0.237 0.275 1.268 0.916 0.458 7.481 2.789 3.972 95 0.207 0.236 1.110 0.787 0.394 6.337 2.379 3.388 100 0.181 0.204 0.974 0.679 0.340 5.384 2.038 2.902 105 0.160 0.177 0.858 0.588 0.294 4.594 1.751 2.494 110 0.141 0.154 0.758 0.512 0.256 3.934 1.509 2.150 115 0.124 0.134 0.672 0.446 0.223 3.380 1.306 1.860 120 0.110 0.117 0.596 0.391 0.195 2.916 1.134 1.615 125 0.098 0.103 0.531 0.343 0.172 2.522 0.987 1.406 31 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Sensor Thermo String/Lead Type !Caution/Notice !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product. Notice (Storage and Operating Conditions) To keep the solderability of the product from degrading, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40°C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. Notice (Soldering and Mounting) NXF Series Please note as shown below when you mount this product. 1. Do not melt the solder in the resin head when you solder this product. If you do so, there is a possibility of wire breakage, electric short mode failure and wire coating breakage. If you cut the lead wire of this product less than 20mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire. 2. Do not touch the resin head directly with the soldering iron. It may cause the melting of solder in the resin head. 3. Do not separate the parallel lead wires 10mm or less from the resin. 4. If you mold this product with resin, please evaluate the quality of this product before you use it. 5. Do not bend the lead wire radius 1mm or more. Continued on the following page. 32 R44E.pdf Mar.6,2020 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. R44E.pdf Mar.6,2020 Temperature Sensor Thermo String/Lead Type !Caution/Notice Continued from the preceding page. Notice (Soldering and Mounting) NXR Series Please note as shown below when you mount this product. 1. Do not melt the solder in the resin head, when you solder this product. If you melt the solder in resin the head, the wire could break and short. If you cut the lead wire of this product less than 8mm from the resin head, the heat of the melted solder at the lead wire edge is propagated easily to the resin head along the lead wire. Please do not cut this product below 9mm. 2. Do not touch the resin head directly with the solder iron. It may cause the melting of solder in the resin head. 3. If you mold this product with resin, please evaluate the quality of this product before you use it. Notice (Soldering and Mounting) NXR Series (Insulation Type) Please note as shown below when you mount this product. 1. Do not melt the solder in the resin head when you solder this product. (more than 25mm in full length of the product). If you melt the solder in the resin head, it has posibility that the wire could break and short. 2. Do not touch the resin head directly with the solder iron. It may cause the melting of solder in the resin head. 3. When additonal processing is carried out on this product (such as bonding, resin molding, and resin coating, etc.), please perform an audit of quality level on an automated machine and only use the product after confirming its reliability. Please talk to us if you have concern matter, like process it under the high temperature and the high pressure. (For example, exposed to high-temperature and high-pressure environment as mold sealing with injection molding.) Notice (Handling) NXF/NXR Series 1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping. 2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding the element by the side lead wire is recommended when lead wire is bent or cut. Notice (Handling) NXR Series (Insulation Type) 1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock at handling. Such forces may cause cracking or chipping. Especially under high-temperature environment, there is a possibility that epoxy resin will become soft. When you set up the processing environment, please examine the processing method after evaluating the quality of this product. 2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding the element by the side lead wire is recommended when lead wire is bent or cut. Handle the lead with care; there is a possibility that a crack may go into the polyurethane insulated coat when bending the lead. 33 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Sensor Thermo String/Lead Type Package Minimum Order Quantity Bulk Ammo Pack Taping Minimum Quantity (pcs.) Part Number NXF 1,000 - - NXR 500 NXRT_3A016 2,500 Part Number Minimum Quantity (pcs.) Taping Dimensions (NXRT_3A016 Series) Δh1 P2 P Δh2 T ΔS H3 D ød Item Code Dimensions (mm) Pitch of Component P 12.7±1.0 Pitch of Sprocket Hole P0 12.7±0.3 Lead Spacing F 5.0±1.0 Length from Hole Center to Component Center P2 6.35±1.3 Length from Hole Center to Lead P1 3.85±0.7 Body Diameter D 4.0 max. Deviation Along Tape, Left or Right ΔS 0±2.0 Carrier Tape Width W3 18.0±0.5 Position of Sprocket Hole W1 9.0±0.5 Lead Distance between Reference and Bottom Planes H0 16.0±1.0 Height of Component H3 7.5±1.0 I +0.5 to −1.0 øD0 4.0±0.1 Lead Diameter ød 0.40±0.05 Total Tape Thickness t1 0.6±0.3 Total Thickness, Tape and Lead Wire t2 1.6 max. Protrusion Length Diameter of Sprocket Hole Deviation Across Tape Δh1, Δh2 1.0 max. Portion to Cut in Case of Defect L3 11.0 +0 –2.0 Hold down Tape Width W0 9.5 min. Hold down Tape Position W2 1.5±1.5 T 2.0 max. Thickness 34 øD0 t1 P0 t2 I W3 W0 W1 L3 H0 W2 F P1 R44E.pdf Mar.6,2020 R44E.pdf Mar.6,2020 Cat. No. R44E-19 Global Locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Murata Manufacturing Co., Ltd. www.murata.com 3 Product specifications in this catalog are as of February 2020. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party’s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.