0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
LQH3N221K34

LQH3N221K34

  • 厂商:

    MURATA

  • 封装:

  • 描述:

    LQH3N221K34 - CHIP COIL - Murata Manufacturing Co., Ltd.

  • 数据手册
  • 价格&库存
LQH3N221K34 数据手册
This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL CHIP COIL Murata Manufacturing Co., Ltd. Cat.No.O05E-5 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Murata's LQ- series of chip coils consists of compact, highperformance inductors. Their innovative coil and case structures mean low DC resistance and outstanding high-frequency characteristics. The series is designed for a variety of applications, facilitating component selection for individual circuit requirements. !PRODUCTS GUIDE Application General Frequency Range Part Number LQH1N LQH3N LQH (N) 4N LQG11N LQG21N Tight inductance tolerance Structure Dimensions (mm) 3.2 1.6 Inductance Range (H) 1n 10n 100n 1µ 10µ 100µ 1m 10m (inch) 1206 1210 1812 0603 0805 1214 0402 Page Wound coil (ferrite core) 3.2 2.5 3Y7 4.5 3.2 1.6 Magnetically shielded multilayer 0.8 8Y9 10Y11 12Y13 2.0 1.25 LQS33N LQG10A Magnetically shielded 3.2 3.5 High-frequency Range 1.0 0.5 Multilayer LQG11A 1.6 0.8 14Y16 0603 0402 17Y20 1.6 0.8 Tight inductance tolerance LQP10A Thin film LQP11A LQW1608A LQN21A LQN1A LQN1H Wound coil (ferrite core) Wound coil (air core) 1.0 0.5 0603 0603 0805 24Y27 1206 1206 1206 1210 1812 0805 0805 1206 2220 1212 2525 32 33Y34 35Y36 39Y41 37Y38 39Y41 29Y31 28 21Y23 1.6 0.8 2.0 1.5 3.2 1.6 3.2 1.6 Chokes LQH1C LQH3C LQH4C LQG21C LQG21F LQG3216F LQN6C LQS33C Magnetically shielded LQS66C Wound coil Magnetically shielded multilayer Wound coil 3.2 1.6 3.2 2.5 4.5 3.2 2.0 1.25 2.0 1.25 3.2 1.6 5.7 5.0 3.3 3.3 6.3 6.3 Please refer to the usage conditions; ¡Notice of Chip Coil .................................................P.42YP.45 ¡Dimensions of Taping.......................................................P.46 Please refer to the usage conditions; ¡Design Kit ...............................................................P.47YP.50 ¡Information of Chip Coil ....................................................P.51 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !PART NUMBERING (Please specify the part number when ordering.) (Ex.) LQ q H w 3 e N r 331 t K y 34 u LQ q N w 21 e A r 10N t J y 04 u LQ q G w 21 e N r R10 t K y 10 u T1 i 33nH/33N 3.3nH/3N3 qChip Coil wForm . Structure tInductance Example : 330µH/331 33µH/330 3.3µH/3R3 0.33µH/R33 yInductance Tolerance Mark H N S P G W eSize Form .Structure Wire wound with coating Wire wound without coating Wire wound with shielded core Thin film Multilayer Horizontal wire wound Size Mark 3.2Z1.6mm 1 3.2Z2.5mm 3 4.5Z3.2mm 4 5.7Z5.0mm 6 1.0Z0.5mm 10 1.6Z0.8mm 11 2.0Z1.25 (1.5) mm 21 33 3.2Z3.5mm, 3.3Z3.3mm 6.3Z6.3mm 66 1.6Z0.8mm 1608 3.2Z1.6mm 3216 rCharacteristic . Applications Mark G J K M N B C S D Tolerance T02% T05% T10% T20% T30% T0.1nH T0.2nH T0.3nH T0.5nH uAdditional Number iPackaging Code (LQG21N/21C/LQP10A/11A/ LQG10A/11A/LQW1608A) Mark Characteristic .Applications N General use C Choke coil A Air coil H High Q For DC power supply F line choke coil Mark Packaging T1 Taped (φ180mm Reel) T2 Taped (φ330mm Reel) Bulk package B1 1 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP INDUCTOR SELECTION Start Choke Application Less than 50MHz Need Magnetical Shield No Yes Impedance Matching or Resonance Greater than 100MHz Operating Frequency 30MHz to 150MHz Chip Inductor for Magnetical shield 0603 LQG11N 47-2200nH Chip Inductor for Choke Use 0805 LQG21C Chip Inductor for General Frequency 1206 LQH1N Chip Inductor for High Frequency 1206 Chip Inductor for Ultra High Frequency 0402 LQG10A 1.2-33nH 1.0-47µH 7-60mA 0.15-100µH LQN1H 54-880nH 0805 LQG21F 1210 LQH3N 0805 LQG21N 0.1-4.7µH 0603 LQG11A 1.2-100nH 1.0-47µH 7-220mA 0.10-560µH 1812 1206 LQG3216F 10µH 70mA 1.0-2200µH 1214 LQS33N 0402 LQP10A 1.0-33nH LQH4N 1.0-100µH 0603 LQP11A 1212 LQS33C 1.3-33nH 1206 LQH1C 0.12-100µH 80-970mA 560-2200µH20-50mA 0603 LQW1608A 2.2-220nH 1210 LQH3C 2220 2525 0805 0.15-560µH 60-1450mA 0.12-10000µH 0.05-6.0A LQN6C/LQS66C LQN21A 3.3-470nH 1812 1206 1.0-470µH 90-1080mA LQH4C LQN1A 8.8-100nH 2 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Standard Chip Coil LQH1N/LQH3N/LQH(N)4N Series Wire Wound Chip Coil with High Q Value at High Frequencies and Low DC Resistance The chip coil LQH/LQN series consists of miniature chip inductors wound on a special ferrite core and are made possible by an automatic winding technique developed by Murata. These inductors have a high Q at high frequencies and low DC resistance, making them very well suited to enhancing the performance of electronic circuits in video, communications, and audio equipment. LQH1N Type LQH3N Type !FEATURES 1. There are three different inductor types: the LQH1N,LQH3N and LQH(N)4N series. These three series cover a wide inductance range (from 0.1µH to 2.2mH). 2. The series has outstanding frequency characteristics and a high Q value at high frequencies. 3. The low DC resistance permits high current flow. 4. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. ¡LQH1N Miniature size (3.2Z1.6Z1.8mm) allows parallel mounting at 2.5mm pitch. The series is suitable for portable audio-visual equipment. ¡LQH3N A high Q value makes this series suitable for circuits up to 100MHz in frequency. The series is excellent for video equipment. ¡LQH(N)4N This series offers high inductance values and high current capacity. At 10µH, up to 450mA designs are possible, resulting in excellent performance when the inductors are used as choke coils. LQH4N/LQN4N Type !DIMENSIONS LQH1N Type 2.3±0.2 1.8±0.2 3.2±0.3 1.6±0.2 1.6±0.2 EIA Code:1206 0.7 0.7 0.7 min. min. min. LQH3N Type 2.5±0.2 2.0±0.2 2.5±0.2 3.2±0.3 2.5±0.2 EIA Code:1210 0.9 1.3 0.9 ±0.3 ±0.2 ±0.3 LQH4N/LQN4N Type 3.6±0.2 3.2±0.2 2.6±0.2 4.5±0.3 3.2±0.2 3.2±0.2 EIA Code:1812 1.0 min. 1.0 min. 1.0 min. (in mm) 3 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS LQH1N Inductance Part Number LQH1NR15K04 LQH1NR22K04 LQH1NR33K04 LQH1NR47K04 LQH1NR56K04 LQH1NR68K04 LQH1NR82K04 LQH1N1R0K04 LQH1N1R2K04 LQH1N1R5K(J)04 LQH1N1R8K(J)04 LQH1N2R2K(J)04 LQH1N2R7K(J)04 LQH1N3R3K(J)04 LQH1N3R9K(J)04 LQH1N4R7K(J)04 LQH1N5R6K(J)04 LQH1N6R8K(J)04 LQH1N8R2K(J)04 LQH1N100K(J)04 LQH1N120K(J)04 LQH1N150K(J)04 LQH1N180K(J)04 LQH1N220K(J)04 LQH1N270K(J)04 LQH1N330K(J)04 LQH1N390K(J)04 LQH1N470K(J)04 LQH1N560K(J)04 LQH1N680K(J)04 LQH1N820K(J)04 LQH1N101K(J)04 Q DC Resistance (Ω) 0.39T40% 0.43T40% 0.45T40% 25MHz T10 30 0.83T40% 0.61T40% 0.67T40% 0.73T40% 0.49T30% 0.9 T30% 10MHz 1.0 T30% 1.6 T30% 0.7 T30% 0.55T30% 0.61T30% 35 1MHz 8MHz 1.5 T30% 1.7 T30% 1.8 T30% 2.0 T30% 2.2 T30% T10 (T5) 2.5 T30% 5MHz 2.7 T30% 3.0 T30% 3.4 T30% 3.1 T30% 3.4 T30% 3.8 T30% 7.2 T30% 40 2.5MHz 8.0 T30% 8.9 T30% 9.9 T30% 11 T30% 12 T30% 200 180 160 120 100 90 75 60 50 43 38 35 31 28 25 23 20 18 16 15 14 13 12 11 10 9.0 8.5 7.5 7.0 80 55 85 250 Nominal Tolerance Test Nominal Test Value(µH) (%) Frequency Value(min.) Frequency 0.15 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 20 Self-resonant Frequency (MHz min.) Allowable Current (mA) 250 240 230 215 200 190 185 175 165 155 150 140 135 130 125 120 115 110 105 100 95 90 Y25 to W85D Operating Temp. Range 50 45 4 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 LQH3N Inductance Part Number LQH3NR10M34 LQH3NR18M34 LQH3NR27M34 LQH3NR39M34 LQH3NR56M34 LQH3NR68M34 LQH3NR82M34 LQH3N1R0M34 LQH3N1R2M34 LQH3N1R5K34 LQH3N1R8K34 LQH3N2R2K34 LQH3N2R7K34 LQH3N3R3K34 LQH3N3R9K34 LQH3N4R7K34 LQH3N5R6K34 LQH3N6R8K34 LQH3N8R2K34 LQH3N100K(J)34 LQH3N120K(J)34 LQH3N150K(J)34 LQH3N180K(J)34 LQH3N220K(J)34 LQH3N270K(J)34 LQH3N330K(J)34 LQH3N390K(J)34 LQH3N470K(J)34 LQH3N560K(J)34 LQH3N680K(J)34 LQH3N820K(J)34 LQH3N101K(J)34 LQH3N121K(J)34 LQH3N151K(J)34 LQH3N181K(J)34 LQH3N221K(J)34 LQH3N271K(J)34 LQH3N331K(J)34 LQH3N391K(J)34 LQH3N471K(J)34 LQH3N561K(J)34 Q DC Resistance (Ωmax.) Nominal Tolerance Test Nominal Test Value(µH) (%) Frequency Value(min.) Frequency 0.10 0.18 0.27 0.39 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 1kHz 50 796kHz T10 (T5) 40 35 1MHz 1MHz T10 20 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.5 2.8 3.1 3.5 3.9 4.3 4.9 5.5 6.2 7.0 8.0 9.3 10.2 11.8 12.5 13.0 22.0 25.0 28.0 5.0 50 45 40 T20 30 25 20 200 25.2MHz 0.25 160 120 100 75 60 50 43 38 35 31 28 25 23 20 18 16 15 14 13 12 11 10 9.0 8.5 8.0 7.5 7.0 6.0 5.5 65 Self-resonant Frequency (MHz min.) Allowable Current (mA) 700 650 600 530 470 450 445 425 400 390 370 320 300 290 270 250 240 225 190 180 170 165 150 125 115 110 100 85 80 70 80 75 70 Y25 to W85D Operating Temp. Range 5 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 LQH4N/LQN4N Inductance Part Number LQH4N1R0M04 LQH4N1R2M04 LQH4N1R5M04 LQH4N1R8M04 LQH4N2R2M04 LQH4N2R7M04 LQH4N3R3M04 LQH4N3R9M04 LQH4N4R7K04 LQH4N5R6K04 LQH4N6R8K04 LQH4N8R2K04 LQH4N100K(J)04 LQH4N120K(J)04 LQH4N150K(J)04 LQH4N180K(J)04 LQH4N220K(J)04 LQH4N270K(J)04 LQH4N330K(J)04 LQH4N390K(J)04 LQH4N470K(J)04 LQH4N560K(J)04 LQH4N680K(J)04 LQH4N820K(J)04 LQH4N101K(J)04 LQH4N121K(J)04 LQH4N151K(J)04 LQH4N181K(J)04 LQH4N221K(J)04 LQH4N271K(J)04 LQH4N331K(J)04 LQH4N391K(J)04 LQH4N471K(J)04 LQH4N561K(J)04 LQH4N681K(J)04 LQH4N821K(J)04 LQH4N102K(J)04 LQH4N122K(J)04 LQH4N152K(J)04 LQN4N182K(J)04 LQN4N222K(J)04 Q DC Resistance (Ωmax.) 0.20 Nominal Tolerance Test Nominal Test Value(µH) (%) Frequency Value(min.) Frequency 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 252kHz 1kHz 40 796kHz T10 (T5) 35 1MHz T10 30 T20 20 0.30 Self-resonant Frequency (MHz min.) 120 100 85 75 62 0.32 0.35 0.38 0.40 0.47 0.50 1MHz 0.56 0.62 0.73 0.82 0.94 1.1 1.2 1.4 1.5 1.7 1.9 2.2 2.5 3.0 3.7 4.5 5.4 6.8 8.2 9.7 11.8 14.5 17.0 20.5 25.0 30.0 37.0 45.0 50.0 53 47 41 38 33 31 27 23 21 19 17 15 14 12 11 10 9.3 8.4 7.5 6.8 6.2 5.5 5.0 4.5 4.0 3.6 3.3 3.0 2.7 2.5 2.2 2.0 1.8 1.6 1.5 1.3 450 400 380 360 340 320 300 270 240 220 200 180 170 160 150 130 120 110 100 95 90 80 70 65 60 50 45 40 35 30 Y25 to W85D 500 Allowable Current (mA) Operating Temp. Range 6 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS ¡Q - Frequency Characteristics LQH1N 100 80 60 Q 40 20 0 0.5 1 5 10 50 100 100µH 10µH 1µH Q 40 20 0 0.1 0.5 1 5 Frequency (MHz) 10 100 80 100µH 60 10µH 1µH Q 40 20 0 0.1 0.5 1 5 Frequency (MHz) 10 LQH3N 100 LQH4N/LQN4N 1000µH 80 60 100µH 10µH Frequency (MHz) ¡Inductance - Temperature Characteristics LQH1N 10 5 ∆L/L (%) 0 10 5 ∆L/L (%) 0 220µH ∆L/L (%) 1.0µH LQH3N 10 5 0 10µH LQH4N/LQN4N 100µH 1µH 1000µH 10µH -5 -10 -5 -10 -5 1000µH -20 0 20 40 60 80 -20 0 20 40 60 80 -10 -20 0 20 40 60 80 Temperature (D) Temperature (D) Temperature (D) ¡Inductance - Current Characteristics LQH1N 500 500 220µH Inductance (µH) Inductance (µH) Inductance (µH) 100 50 100µH 33µH 10µH 100 50 100µH 39µH 1000 500 LQH3N 5000 LQH4N/LQN4N 2200µH 1000µH 390µH 100µH 39µH 10 5 10 5 10µH 3.9µH 100 50 1 5 10 1.0µH 50 100 Current (mA) 500 1 5 10 1.0µH 50 100 Current (mA) 500 10 5 10 10µH 50 100 Current (mA) 500 ¡Coupling Coefficient LQH1N 10 Coupling Coefficient (%) 8 6 R=0.9mm 4 2 R=2.0mm 0 0.5 1 5 10 50 100 Inductance (µH) (2.5mm Pitch Parallel Mounting) R 7 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Multilayer Chip Inductor LQG11N Series Magnetically Shielded Multilayer Chip Coil Excellent for High Density Mounting The LQG11N series, of magnetically shielded chip coil was developed by using original multilayer process technology and magnetic materials. Compact size is suitable for high density mounting. Shielded construction is not affected by interference from peripheral components. !FEATURES 1. Magnetically shielded structure provides excellent characteristics in cross talk and magnetic coupling. 2. Compact size (1.6Z0.8mm) and light weight. 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance. Both flow and reflow soldering can be applicable. !DIMENSIONS 0.4±0.2 !APPLICATIONS ¡Resonance circuit, traps, filter circuits and RF choke in telecommunication equipments, cordless phones, radio equipments. 1.6±0.15 0.8±0.15 0.8±0.15 (in mm) 8 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS Inductance Part Number LQG11N47NM00 LQG11N68NM00 LQG11N82NM00 LQG11NR10K00 LQG11NR12K00 LQG11NR15K00 LQG11NR18K00 LQG11NR22K00 LQG11NR27K00 LQG11NR33K00 LQG11NR39K00 LQG11NR47K00 LQG11NR56K00 LQG11NR68K00 LQG11NR82K00 LQG11N1R0K00 LQG11N1R2K00 LQG11N1R5K00 LQG11N1R8K00 LQG11N2R2K00 Q Nominal Tolerance Nominal Test Frequency Value (nH) (%) Value(min.) (MHz) 1047 1068 1082 1100 1120 1150 1180 1220 1270 1330 1390 1470 1560 1680 1820 1000 1200 1500 1800 2200 35 10 0.80 0.95 1.15 T10 0.80 15 25 0.85 1.00 1.35 1.55 1.70 2.10 0.60 0.60 0.50 T20 10 50 0.30 DC Resistance (Ω max.) Self-resonant Frequency (MHz min.) 260 250 245 240 205 180 165 150 136 125 110 105 95 90 85 75 65 60 55 50 15 25 35 Y25 to W85D 50 Allowable Current (mA) Operating Temp. Range !TYPICAL ELECTRICAL CHARACTERISTICS ¡Q-Frequency Characteristics ¡Inductance-Frequency Characteristics 80 10000 2200nH 60 Inductance (nH) 2200nH 1000 820nH Q 40 100nH 820nH 20 47nH 0 1 10 100 Frequency (MHz) 1000 100nH 100 47nH 1 1 10 100 Frequency (MHz) 1000 Measuring instrument Q : HP4291A+16192A Measuring instrument L : HP4291A+16192A 9 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Multilayer Chip Coil LQG21N Series Magnetically Shielded Multilayer Chip Coil Low Drift Excellent for High Density Mounting The LQG21N series consists of magnetically shielded chip coils developed using original Murata multilayer process technology and magnetic materials. The coils occupy one quarter the volume of conventional chip coils and feature high reliability. !FEATURES 1. Magnetically shielded structure provides excellent crosstalk characteristics. 2. Compact (2.0Z1.25mm) and lightweight. 3. Low inductance drift resulting from soldering,environmental tests, etc. 4. Outstanding solder heat resistance. Either flow or reflow soldering can be used. !DIMENSIONS !APPLICATIONS ¡Hard-disk drives ¡Audio-Visual equipment ¡Telecommunications equipment 2.0±0.3 1.25±0.2 EIA Code:0805 0.5±0.3 (in mm) Part Number LQG21NR10K10Y2R2K10 LQG21N2R7K10Y4R7K10 T 0.85T0.2 1.25T0.2 10 T This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS Inductance Part Number LQG21NR10K10 LQG21NR12K10 LQG21NR15K10 LQG21NR18K10 LQG21NR22K10 LQG21NR27K10 LQG21NR33K10 LQG21NR39K10 LQG21NR47K10 LQG21NR56K10 LQG21NR68K10 LQG21NR82K10 LQG21N1R0K10 LQG21N1R2K10 LQG21N1R5K10 LQG21N1R8K10 LQG21N2R2K10 LQG21N2R7K10 LQG21N3R3K10 LQG21N3R9K10 LQG21N4R7K10 Q DC Resistance (Ω max.) 0.26 0.29 0.32 0.35 0.38 0.42 0.48 0.53 0.57 0.63 0.72 0.81 0.40 0.47 0.50 0.57 0.63 0.69 0.80 0.89 1.00 Nominal Tolerance Test Nominal Test Value(µH) (%) Frequency Value(min.) Frequency 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 Self-resonant Frequency (MHz min.) 340 310 270 250 220 200 180 165 150 140 125 115 107 97 87 80 71 66 59 53 47 Allowable Current (mA) Operating Temp. Range 20 25MHz 25MHz 250 200 Y40 to W85D 25 T10 150 50 10MHz 45 10MHz 30 !TYPICAL ELECTRICAL CHARACTERISTICS ¡Q - Frequency Characteristics 100 ¡Inductance - Temperature Characteristics 1R0 80 4R7 R22 60 L/L(%) Q 40 -5 20 R82 0 4.7µH 5 0.1µH 1R8 R10 10 -10 -20 0 20 40 60 Temperature (°C) 80 0 1 10 Frequency (MHz) 100 1000 ¡Inductance - Current Characteristics 50 10 Inductance (µH) 5 4.7µH 1.8µH 1 0.5 1.0µH 0.82µH 0.22µH 0.1 0.10µH 1 5 10 50 100 Current (mA) 500 11 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Small Tolerance Chip Coil LQS33N Series for Oscillation Circuits High Q, Magnetically Shielded Chip Coil with Tight Inductance Tolerance (T2%), Perfect in Oscillation Circuits The LQS33N series consists of closed, magnetically shielded chip inductors wound on ferrite bobbins developed by Murata. Their high Q value virtually eliminates interference with nearby circuits. This, combined with their tight inductance tolerance, makes these chip inductors excellent in resonant circuits. !FEATURES 1. The coil's outstanding stability yields a reduction in inductor tolerance to within T2%. 2. Its high Q (typically greater than 80) is present at all inductance values and is the basis of this chip coil's outstanding low loss circuit characteristics. 3. The ferrite core shielding structure both eliminates external interference and facilitates high mounting density. 4. Small inductance variation with respect to temperature change makes these coils applicable in traps or LC filters for stable frequency characteristics. 5. This series is thin and compact, with a thickness of merely 1.8mm. !DIMENSIONS 3.2 +0.3 -0.2 0.7 min. 0.7 min. 0.7 min. 3.5 +0.3 -0.2 1.8±0.2 EIA Code:1214 (in mm) 12 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS Inductance Part Number LQS33N1R0G(J)04 LQS33N1R2G(J)04 LQS33N1R5G(J)04 LQS33N1R8G(J)04 LQS33N2R2G(J)04 LQS33N2R7G(J)04 LQS33N3R3G(J)04 LQS33N3R9G(J)04 LQS33N4R7G(J)04 LQS33N5R6G(J)04 LQS33N6R8G(J)04 LQS33N8R2G(J)04 LQS33N100G(J)04 LQS33N120G(J)04 LQS33N150G(J)04 LQS33N180G(J)04 LQS33N220G(J)04 LQS33N270G(J)04 LQS33N330G(J)04 LQS33N390G(J)04 LQS33N470G(J)04 LQS33N560G(J)04 LQS33N680G(J)04 LQS33N820G(J)04 LQS33N101G(J)04 Nominal Tolerance Test Peak Value Value(µH) (%) Frequency (Typ.) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Q Min. Value DC Self-resonant Allowable Operating Resistance Frequency Current Test Temp. Range (Ω) (mA) (MHz min.) Frequency 0.19T30% 0.22T30% 0.26T30% 0.28T30% 0.33T30% 0.39T30% 0.43T30% 0.45T30% 0.52T30% 0.56T30% 0.62T30% 0.69T30% 0.94T30% 1.1 T30% 1.2 T30% 1.3 T30% 1.5 T30% 1.7 T30% 2.4 T30% 2.6 T30% 3.0 T30% 3.3 T30% 5.3 T30% 5.8 T30% 6.6 T30% 120 100 80 70 60 55 50 45 40 37 35 32 30 27 25 23 20 18 16 15 14 13 12 11 10 85 70 7.96 MHz 60 7.96 MHz 50 90 T2 (T5) 70 30 Y25 to W85D 15 2.52 MHz 95 2.52 MHz 10 80 100 !TYPICAL ELECTRICAL CHARACTERISTICS ¡Q - Frequency Characteristics ¡Inductance - Temperature Characteristics 120 100µH 100 80 Q 60 40 20 0 0.1 L/L (%) 10µH 1.0µH 10 5 100µH 0 -5 -10 0.5 1 5 10 50 100 Frequency (MHz) -20 0 20 40 60 80 Temperature (°C) ¡Inductance - Current Characteristics 500 ¡Coupling Coefficient 100 Inductance (µH) 50 100µH Coupling Coefficient (%) 47µH 22µH 10µH 4.7µH 2.2µH 1.0µH 10 8 6 4 2 0 1 5 10 50 100 1mm 10 5 Inductance (µH) 1 5 10 50 100 500 Current (mA) 13 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Multilayer Chip Inductor LQG10A/11A Series for High Frequency High-Q, Stable Inductance in High Frequency Range Small Size Multilayer Chip Inductor for High Frequency Range The LQG10A/11A series are chip inductors specifically designed for high frequency applications. The LQG10A/11A series is designed to realize stable characteristics in high frequency range applying integrated multilayer process. The integrated multilayer process enables a wide range of inductance values with tight tolerance. !FEATURES 1. High-Q, stable inductance in high frequency is achieved by the unique low-capacitance structure. It is suitable for mobile communication equipment. 2. The small size of LQG10A (1.0Z0.5Z0.5mm) is ideal for small mobile equipment. 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance. LQG10A LQG11A !DIMENSIONS LQG10A 0.25±0.1 Direection Indicator 0.5±0.1 1.0±0.1 0.5±0.1 !APPLICATIONS ¡High frequency circuit of telecommunication equipment such as CDMA, DECT, PHS, PCS, PCN, GSM and DCS. EIA Code:0402 LQG11A 0.3±0.2 Direction Indicator 0.8±0.15 1.6±0.15 0.8±0.15 EIA Code:0603 (in mm) 14 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS LQG10A Part Number Inductance Q Nominal Test Test Nominal 500MHz 800MHz Value Tolerance Frequency Value Frequency (typ.) (typ.) (nH) (MHz) (MHz) (min.) 01.2 01.5 01.8 02.2 02.7 03.3 03.9 04.7 05.6 06.8 08.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 23 22 T5% 24 100 8 100 23 30 29 29 31 30 31 30 29 28 27 23 33 32 31 27 24 34 32 33 T0.3nH 22 25 24 35 33 31 30 SelfDC Allowable resonant Operating 1GHz Resistance Frequency Current Temp. Range (Ω max.) (mA) (typ.) (MHz min) 38 34 33 32 0.15 0.17 0.19 0.19 0.23 0.26 0.29 0.33 0.35 0.41 0.46 0.51 0.58 0.67 5300 4200 3600 3200 2800 2300 2100 1800 1600 1500 200 Y40 to W85D 6000 LQG10A1N2S00 LQG10A1N5S00 LQG10A1N8S00 LQG10A2N2S00 LQG10A2N7S00 LQG10A3N3S00 LQG10A3N9S00 LQG10A4N7S00 LQG10A5N6S00 LQG10A6N8J00 LQG10A8N2J00 LQG10A10NJ00 LQG10A12NJ00 LQG10A15NJ00 LQG10A18NJ00 LQG10A22NJ00 LQG10A27NJ00 LQG10A33NJ00 0.10 29 LQG11A Inductance Part Number Nominal Value (nH) 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 T5% (T10%) 100 12 100 0.20 5000 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 4000 3500 3000 2800 2600 2300 2000 1700 1500 1200 1100 1000 900 800 300 Y40 to W85D T0.3nH 0.15 0.10 DC Test Nominal Test Resistance Tolerance Frequency Value Frequency (Ω max.) (MHz) (min.) (MHz) Q Selfresonant Frequency (MHz min.) Allowable Current (mA) Operating Temp. Range LQG11A1N2S00 LQG11A1N5S00 LQG11A1N8S00 LQG11A2N2S00 LQG11A2N7S00 LQG11A3N3S00 LQG11A3N9S00 LQG11A4N7S00 LQG11A5N6S00 LQG11A6N8J(K)00 LQG11A8N2J(K)00 LQG11A10NJ(K)00 LQG11A12NJ(K)00 LQG11A15NJ(K)00 LQG11A18NJ(K)00 LQG11A22NJ(K)00 LQG11A27NJ(K)00 LQG11A33NJ(K)00 LQG11A39NJ(K)00 LQG11A47NJ(K)00 LQG11A56NJ(K)00 LQG11A68NJ(K)00 LQG11A82NJ(K)00 LQG11AR10J(K)00 6000 15 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS "Q-Frequency Characteristics 100 "Inductance - Frequency Characteristics LQG10A 1000 33nH LQG10A 80 Inductance (nH) 1.5nH Q 60 4.7nH 40 12nH 20 33nH 0 100 1000 Frequency (MHz) 10000 1 100 1000 Frequency (MHz) 100 12nH 4.7nH 10 1.5nH 10000 Measuring instrument Q : HP8720C, SMA connector (MM1215-3CC) Measuring instrument L : HP8720C, SMA connector (MM1215-3CC) LQG11A 200 1000 LQG11A 160 3.3nH 120 Inductance (nH) 68nH 100 10nH Q 80 10nH 10 3.3nH 40 68nH 0 100 1000 10000 1 100 1000 Frequency (MHz) 10000 Frequency (MHz) 16 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Thin Film Chip Coil LQP10A/LQP11A Series for High Frequency Tight Inductance Tolerance Chip Coil for High Frequency Application Small Size and Tight Inductance Tolerance (T0.2nH or T2%) The LQP10A/LQP11A series consists of chip coils with a tight inductance tolerance (T0.2nH or T2%) achieved even in low inductance region. !FEATURES 1. Tight inductance tolerance (T0.2nH, T2%) realized by thin-film technology enables assemble with no tuning. 2. High self resonant frequency due to low stray capacitance and close inductance distribution provide stable inductance in high frequency circuit such as telecommunication equipment. 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance. ¡LQP10A Ultra-Small size 0402 inductor which is low, and lightest weight (half of multilayer type) in the world enables to miniaturize mobile telephone. ¡LQP11A Small size of 0603 (LQP11A) is suitable for small hand held equipment, especially for card size equipment. LQP10A LQP11A The appearance of coil pattern depends on the part number. !DIMENSIONS LQP10A 0.5T0.15 1.0T0.15 0.35T0.1 0.25T0.1 !APPLICATIONS ¡High frequency circuit of telecommunication equipment, such as DECT, PHS, PCS, PCN, GSM, DCS and CDMA. ¡Impedance Matching—Power-AMP Module (PA), SAW filter ¡Resonance circuits—VCO EIA Code : 0402 LQP11A 0.8±0.15 1.6±0.15 0.5T0.1 0.2 min. EIA Code : 0603 (in mm) Use plastic tweezers when treating with tweezers. 17 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS LQG10A Inductance Part Number Nominal Value (nH) 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10.0 12.0 15.0 18.0 22.0 27.0 33.0 T2% (T5%) 25 1.6 1.8 22 2.0 2.6 21 3.1 3.8 3700 3300 3100 2800 2500 2100 60 80 70 90 26 500 T0.1nH (T0.2nH) 35 40 0.3 6000 0.4 190 220 45 0.3 0.2 220 280 0.2 50 0.1 Tolerance Test Frequency (MHz) Typical @1GHz Q Min. Value Test Frequency (MHz) DC Resistance (Ω max.) Self-resonant Allowable Frequency Current (MHz min) (mA) 400 390 Operating Temp. Range LQP10A1N0B(C)00 LQP10A1N1B(C)00 LQP10A1N2B(C)00 LQP10A1N3B(C)00 LQP10A1N5B(C)00 LQP10A1N6B(C)00 LQP10A1N8B(C)00 LQP10A2N0B(C)00 LQP10A2N2B(C)00 LQP10A2N4B(C)00 LQP10A2N7B(C)00 LQP10A3N0B(C)00 LQP10A3N3B(C)00 LQP10A3N6B(C)00 LQP10A3N9B(C)00 LQP10A4N3B(C)00 LQP10A4N7B(C)00 LQP10A5N1B(C)00 LQP10A5N6B(C)00 LQP10A6N2B(C)00 LQP10A6N8B(C)00 LQP10A7N5B(C)00 LQP10A8N2B(C)00 LQP10A9N1B(C)00 LQP10A10NG(J)00 LQP10A12NG(J)00 LQP10A15NG(J)00 LQP10A18NG(J)00 LQP10A22NG(J)00 LQP10A27NG(J)00 LQP10A33NG(J)00 280 30 28 13 500 0.5 170 Y40 to W85D 29 0.6 160 0.7 140 0.9 130 1.1 5500 110 1.3 4500 100 18 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 LQG11A Inductance Part Number Nominal Value (nH) 01.3 01.5 01.8 02.2 02.7 03.3 03.9 04.7 05.6 06.8 08.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.00 T2% 500 T0.2nH Tolerance Test Frequency (MHz) Peak Value (Typ.) 160 140 120 100 190 185 180 175 165 163 157 155 150 143 139 138 132 130 128 126 128 27 1 125 300 17 500 0.5 0.6 0.7 0.8 1.0 1.3 1.5 1.9 2.4 2.8 2.2 3.4 3.5 4.6 6.1 5900 5200 4700 4300 3600 3400 3000 2700 2300 2100 1900 1700 1400 1200 1000 900 800 700 50 100 150 Y40 to W85D 200 0.4 Q Min. Value Test Frequency (MHz) DC Resistance (Ω max.) 0.3 Self-resonant Allowable Frequency Current (MHz min) (mA) 300 Operating Temp. Range LQP11A1N3C00 LQP11A1N5C00 LQP11A1N8C00 LQP11A2N2C00 LQP11A2N7C00 LQP11A3N3C00 LQP11A3N9C00 LQP11A4N7C00 LQP11A5N6C00 LQP11A6N8C00 LQP11A8N2C00 LQP11A10NG00 LQP11A12NG00 LQP11A15NG00 LQP11A18NG00 LQP11A22NG00 LQP11A27NG00 LQP11A33NG00 LQP11A39NG00 LQP11A47NG00 LQP11A56NG00 LQP11A68NG00 LQP11A82NG00 LQP11AR10G00 6000 250 19 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS "Q-Frequency Characteristics "Inductance - Frequency Characteristics LQP10A 100 33nH 100 LQP10A 80 2.2nH Inductance (nH) Q 60 4.7nH 8.2nH 20 15nH 33nH 0 100 1000 Frequency (MHz) 10000 1 100 1000 Frequency (MHz) 10000 2.2nH 15nH 10 40 8.2nH 4.7nH LQP11A 200 1.5nH 160 100 1000 LQP11A 100nH 68nH 33nH 15nH Inductance (nH) Q 120 3.3nH 80 6.8nH 40 33nH 0 100 100nH 68nH 1000 Frequency (MHz) 15nH 6.8nH 10 3.3nH 1.5nH 1000 Frequency (MHz) 10000 10000 1 100 20 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Wire Wound Chip Coil LQW1608A Series for High Frequency High-Q and Tight Inductance Tolerance (T0.2nH or T2%) Ultra Small Wire Wound Air-core Chip Coil The LQW1608A series which consists of air-core chip coil using a miniature alumina core. The tight inductance tolerance (T0.2nH, T2%) is available due to Murata's original winding technology. The series has high Q value and high self resonant frequency in high frequency range. It is suitable for high frequency circuits which are used in telecommunication equipment. !FEATURES 1. Horizontal winding structure enables tight inductance tolerance (T0.2nH, T2%). Stable circuit operation is possible. 2. Broad range of inductance (3.9nH to 220nH). 3. The subminiature dimensions (1.6Z0.8mm) allow high density mounting. 4. The high self resonant frequency realizes high-Q value and stable inductance at high frequency. 5. Low DC resistance design is ideal for low loss, high output and low power consumption. 4. Resin-coated surface enables excellent mounting. !DIMENSIONS 0.4max. 0.8T0.2 1.6T0.2 0.8T0.3 0.2T0.1 !APPLICATIONS ¡High frequency circuit in telecommunication equipment, such as DECT, PHS, PCS, PCN, GSM and CDMA. ¡Impedance Matching—Power-AMP Module (PA), SAW filter ¡Resonance circuits—VCO 0.3T0.1 0.3T0.1 (in mm) 21 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS Inductance Part Number Nominal Value (nH) 102.2 Tolerance T0.5nH T0.5nH (T0.2nH) T0.5nH T0.5nH (T0.2nH) 45 0.082 750 75 95 Q Test Nominal Test 300 Frequency Value Frequency (MHz) (MHz) (min.) (MHz) Typical 16 25 0.059 850 800 (MHz) Typical 80 SelfDC Allowable 1.5 Resistance resonant Current Operating Frequency Temp. Range (GHz) (Ω max.) (mA) (MHz min.) Typical 110 0.049 700 LQW1608A2N2D00 LQW1608A3N6D(C)00 103.6 LQW1608A3N9D(C)00 103.9 LQW1608A4N3D(C)00 104.3 LQW1608A4N7D00 104.7 LQW1608A5N6D(C)00 105.6 LQW1608A6N2D(C)00 106.2 LQW1608A6N8D(C)00 106.8 LQW1608A7N5D00 LQW1608A8N2D00 LQW1608A8N7D00 LQW1608A9N1D00 LQW1608A9N5D00 LQW1608A10NJ(G)00 LQW1608A11NJ(G)00 LQW1608A12NJ(G)00 LQW1608A13NJ(G)00 LQW1608A15NJ(G)00 LQW1608A16NJ(G)00 LQW1608A18NJ(G)00 LQW1608A20NJ(G)00 LQW1608A22NJ(G)00 LQW1608A24NJ(G)00 LQW1608A27NJ(G)00 LQW1608A30NJ(G)00 LQW1608A33NJ(G)00 LQW1608A36NJ(G)00 LQW1608A39NJ(G)00 LQW1608A43NJ(G)00 LQW1608A47NJ(G)00 LQW1608A51NJ(G)00 LQW1608A56NJ(G)00 LQW1608A62NJ(G)00 LQW1608A68NJ(G)00 LQW1608A72NJ(G)00 LQW1608A75NJ(G)00 LQW1608A82NJ(G)00 LQW1608A91NJ(G)00 LQW1608AR10J(G)00 LQW1608AR11J(G)00 LQW1608AR12J(G)00 LQW1608AR13J(G)00 LQW1608AR15J(G)00 LQW1608AR16J(G)00 LQW1608AR18J(G)00 LQW1608AR20J(G)00 LQW1608AR22J(G)00 107.5 108.2 108.7 109.1 109.5 110.6 111.6 112.6 113.6 115.6 116.6 118.6 120.6 122.6 124.6 127.6 130.6 133.6 136.6 139.6 143.6 147.6 151.6 156.6 162.6 168.6 172.6 175.6 182.6 191.6 100.6 110.6 120.6 130.6 150.6 160.6 180.6 200.6 220.6 35 T0.5nH 80 100 0.11 6000 650 250 50 85 0.13 600 55 90 105 0.16 5500 4900 550 0.17 40 95 0.21 4600 3800 3700 3300 3200 2900 2800 2700 2600 2500 2400 2300 2200 2100 2050 2000 1900 1800 1350 1600 1450 1400 1350 1300 1250 1200 500 440 420 Y25 to W85D 100 0.23 90 0.26 85 T5% (T2%) 38 200 50 75 0.29 0.33 0.35 0.51 0.38 60 34 80 55 0.56 0.60 0.64 0.68 75 32 50 1.2 1.3 1.4 70 65 Y 25 100 60 1.5 2.1 2.2 2.4 2.5 400 380 370 360 280 340 270 250 230 220 200 180 170 160 150 140 120 150 45 22 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS "Q-Frequency Characteristics 160 140 8.7nH 120 100 Q 80 47nH 60 40 20 0 10 100 Frequency (MHz) 1000 220nH 10000 110nH "Inductance - Frequency Characteristics 1000 220nH 100nH Inductance (nH) 100 470nH 20nH 10 8.7nH 20nH 1 10 100 Frequency (MHz) 1000 10000 Measuring instrument Q : HP4291A + 16193A Measuring instrument L : HP4291A + 16193A 23 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Wire Wound Chip Coil LQN21A/LQN1A Series for High Frequency Small Winding-type Air-core Chip Coil with High Q value at High Frequencies and Low DC Resistance The LQN21A/LQN1A series consists of air-core chip coil using a sub-miniature alumina core as a bobbin. The high Q value at high frequencies and high self-resonant frequencies make this coil perfect for use in the high frequency circuits of communications equipment. !FEATURES 1. LQN21A series covers inductance range from 3.3nH to 470nH. 2. Their high self-resonant frequency characteristic yields a high Q value and highly stable inductance at high frequencies. 3. Low DC resistance design enables to handle higher allowable current. 4. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. ¡LQN21Axxxx04 Inductance tolerance T0.5nH (8.2nH max.), T5% (10nH to 220nH) and T10% (270nH to 470nH) are realized. The sub miniature dimensions (2.0Z1.5mm) allow high density mounting. ¡LQN21A (Tight inductance tolerance) Tight inductance tolerance of T2% is available. ¡LQN21Axxxx44 LQN21Axxxx44 using thick wire (f0.12mm) has higher Q value than existing LQN21A series. Low DC resistance design enables to handle higher current. LQN21Axxxx44 covers inductance range from 2.7nH to 27nH. ¡LQN1A Miniature size (3.2Z1.6Z1.8mm) allows parallel mounting at 2.5mm pitch. Inductance tolerance T5% realized. LQN21A LQN1A !DIMENSIONS LQN21A 1.5T0.2 1.5T0.2 1.7 Y0.1 W0.08 2.0T0.2 1.5T0.2 0.5 0.5 0.5 min. min. min. EIA Code : 0805 LQN1A 2.3T0.2 1.6T0.2 ¡High frequency circuit in telecommunication equipment, such as DECT, PHS, PCS, PCN, GSM and CDMA. ¡Impedance Matching—Power-AMP Module (PA), SAW filter ¡Resonance circuits—VCO 3.2T0.3 1.6T0.2 1.8T0.2 !APPLICATIONS EIA Code : 1206 0.7 min. 0.7 min. 0.7 min. (in mm) 24 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS LQN21Axxxx04 Inductance Part Number Nominal Test Peak Value Value Tolerance Frequency (Typ.) (nH) (MHz) 113.3 116.8 118.2 110 112 115 118 122 127 133 139 147 156 168 182 100 120 150 180 220 270 330 390 470 T10% 10 50 15 25.2 T5% (T10%) 65 80 100 65 70 65 60 70 50 45 30 35 100 150 40 200 70 T0.5nH T0.5nH (T10%) 80 65 70 Q Min. Value 10 20 *1 *2 DC Self-resonant Allowable Operating Resistance Frequency Current Temp. Range Test (mA) Frequency (Ω max.) (MHz min.) (MHz) 0.05 0.11 0.12 0.03 0.11 30 250 0.12 0.10 0.09 0.17 0.15 0.09 0.23 0.26 0.23 0.42 0.38 0.40 0.47 0.71 0.70 2.00 2.20 2.50 2.80 6000 5400 3900 3300 3200 2700 2600 2100 2300 1900 1700 1600 1500 1200 1100 1900 1750 1350 1700 1500 1550 1500 1400 1350 1910 1680 1630 1320 1680 1630 1690 1720 1540 1570 1730 1450 1430 1460 1320 1350 1320 1390 1250 1240 1190 1180 1170 1160 Y25 to W85D LQN21A3N3D04 LQN21A6N8D(K)04 LQN21A8N2D(K)04 LQN21A10NJ(K)04 LQN21A12NJ(K)04 LQN21A15NJ(K)04 LQN21A18NJ(K)04 LQN21A22NJ(K)04 LQN21A27NJ(K)04 LQN21A33NJ(K)04 LQN21A39NJ(K)04 LQN21A47NJ(K)04 LQN21A56NJ(K)04 LQN21A68NJ(K)04 LQN21A82NJ(K)04 LQN21AR10J(K)04 LQN21AR12J(K)04 LQN21AR15J(K)04 LQN21AR18J(K)04 LQN21AR22J(K)04 LQN21AR27K04 LQN21AR33K04 LQN21AR39K04 LQN21AR47K04 LQN21A (Tight inductance tolerance) Inductance Part Number Nominal Test Peak Value Value Tolerance Frequency (Typ.) (nH) (MHz) 133 139 147 156 168 182 100 120 150 180 220 T2% 100 65 80 65 70 65 60 55 50 55 50 35 40 30 35 100 150 40 Q Min. Value *1 *2 DC Self-resonant Allowable Operating Resistance Frequency Current Test Temp. Range (mA) Frequency (Ω max.) (MHz min.) (MHz) 250 0.15 0.09 0.23 200 0.26 0.23 0.42 0.55 0.40 0.68 0.71 0.70 1900 1700 1600 1500 1200 1100 1900 1750 1350 1700 1500 570 730 450 430 460 320 270 320 260 250 240 Y25 to W85D LQN21A33NG04 LQN21A39NG04 LQN21A47NG04 LQN21A56NG04 LQN21A68NG04 LQN21A82NG04 LQN21AR10G04 LQN21AR12G04 LQN21AR15G04 LQN21AR18G04 LQN21AR22G04 *1 Measured with LCR meter YHP4191A, measuring tap 16193A. *2 Measured with Network Analyzer HP8753C. 25 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 LQN21Axxxx44 Inductance Part Number Q Nominal Test Nominal Test 800MHz Value Tolerance Frequency Value Frequency (Typ.) (nH) (MHz) (min.) (MHz) 12.7 13.1 13.3 15.6 16.8 18.6 10.8 12.8 15.8 18.8 21.8 27.8 195 T10% 40 105 75 65 45 T5% 100 T0.5nH 35 250 195 115 100 185 100 90 20 185 SelfDC Allowable resonant Operating 1.5GHz Resistance Frequency Current Temp. Range (Ω max.) (mA) (Typ.) (MHz min.) 120 110 6000 1900 1800 1700 1500 5400 0.03 3900 3300 3200 3100 2600 2200 1800 1400 1300 1320 1100 1000 1950 1900 Y25 to W85D LQN21A2N7D44 LQN21A3N1D44 LQN21A3N3D44 LQN21A5N6D44 LQN21A6N8D44 LQN21A8N6D44 LQN21A10NJ44 LQN21A12NK44 LQN21A15NK44 LQN21A18NK44 LQN21A21NK44 LQN21A27NK44 0.02 0.04 0.05 0.06 LQN1A Inductance Part Number LQN1A8N8J(K)04 LQN1A15NJ(K)04 LQN1A17NJ(K)04 LQN1A23NJ(K)04 LQN1A27NJ(K)04 LQN1A33NJ(K)04 LQN1A39NJ(K)04 LQN1A47NJ(K)04 LQN1A56NJ(K)04 LQN1A64NJ(K)04 LQN1A84NJ(K)04 LQN1AR10J(K)04 Nominal Tolerance Test Peak Value Value (nH) (%) Frequency (Typ.) 118.8 114.7 117 123 127 133 139 147 156 164 184 100 T5 (T10) 100MHz 436MHz 100 Q Min. Value 50 DC Self-resonant Allowable Operating Resistance Frequency Current Test Temp. Range (Ω) (MHz min.) (mA) Frequency 0.029T40% 0.035T40% 0.037T40% 0.046T40% 0.051T40% 0.057T40% 0.067T40% 0.110T40% 0.140T40% 0.180T40% 0.280T40% 0.300T40% 1900 1000 750 680 650 590 560 530 490 380 330 290 240 230 Y25 to W85D 60 190 180 170 26 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS "Q-Frequency Characteristics LQN21Axxxx04 "Inductance-Frequency Characteristics LQN21Axxxx44 100 27nH 50 100 80 60 Q 470nH 40 330nH Inductance (nH) 40 30 20 12nH 20 10nH 0 1 5 10 50 100 Frequency (MHz) 220nH 33nH 500 1000 5000 10000 10 0 10 50 100 500 1000 Frequency (MHz) 3.3nH 5000 10000 LQN21Axxxx44 150 3.3nH 120 90 12nH Q 60 30 27nH 0 10 50 100 500 Frequency (MHz) 1000 5000 10000 LQN1A 120 39nH 100 8.8nH 80 Q 60 40 100nH 20 0 10 50 100 500 Frequency (MHz) 1000 5000 27 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL High Q Chip Coil LQN1H for High Frequency Wire Wound Chip Coil with High Q from 30MHz to 150MHz and Stable Inductance The LQN1H series consists of wire wound chip coils which use ferrite cores for high frequency application. Their high Q values from 30MHz to 150MHz and low DC resistance make them suitable in high-frequency resonator circuits. !FEATURES 1. Same dimensions as LQN1A/LQH1N/LQH1C series enables design flexibility. 2. Broad range of inductance 54 to 880nH. 3. High Q value and stable inductance at high frequency (30MHz to 150MHz). 4. Both flow and reflow soldering methods are applicable due to excellent solder heat resistance. 5. Miniature size (3.2Z1.6Z1.8mm) allows parallel mounting at 2.5mm pitch. !DIMENSIONS 2.3T0.2 1.6T0.2 ¡Voltage controlled oscillators, traps, and filter circuits in mobile communication equipments, cordless phones, various radio equipment, FM radio turners, TV turners (VHF low), VIF circuits. 3.2T0.3 1.6T0.2 !TYPICAL ELECTRICAL CHARACTERISTICS ¡Q-Frequency Characteristics 100 R21 80 60 Q 40 20 0 1 5 10 50 100 Frequency (MHz) 500 1000 R88 54N 0.7 min. 0.7 min. 0.7 min. 1.8T0.2 !APPLICATIONS EIA Code : 1206 (in mm) !SPECIFICATIONS Inductance Part Number LQN1H54NK04 LQN1H95NK04 LQN1HR14K(J)04 LQN1HR21K(J)04 LQN1HR29K(J)04 LQN1HR39K(J)04 LQN1HR50K(J)04 LQN1HR61K(J)04 LQN1HR75K(J)04 LQN1HR88K(J)04 28 Nominal Tolerance Test Peak Value Value (nH) (%) Frequency (Typ.) 154 195 145 215 290 390 500 610 750 880 90 T10 (T5) 1MHz 85 100MHz T10 65 75 80 Q Min. Value 50 DC Self-resonant Allowable Operating Resistance Frequency Current Test Temp. Range (Ω) (MHz min.) (mA) Frequency 0.035T30% 0.047T30% 0.061T30% 0.115T30% 0.175T30% 0.265T30% 0.445T30% 0.485T30% 0.795T30% 0.865T30% 800 650 500 430 360 300 270 240 220 200 920 790 700 520 420 330 260 250 190 180 Y25 to W85D 60 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Miniature Chip Coil LQH1C/LQH3C/LQH4C Series for Power Line Choke Miniature Chip Coil for Power Line Choke Has High Current Capacity, Low DC Resistance, Large Inductance The LQH1C, LQH3C and LQH4C series consist of miniature chip coils with low DC resistance, high current capacity, and high impedance characteristics. These features are made possible by the development of Murata's innovative automatic winding techniques. They are excellent for use as choke coils in DC power supply circuits. !FEATURES 1. The LQH1C, LQH3C and LQH4C series have an open magnetic structure. The series have a combined inductance range of 0.12µH to 560µH and are applicable in a wide variety of applications. 2. The series exhibit low voltage drops and small variations in inductance with respect to temperature rise and DC current level. This makes them excellent for use as power supply line choke coils. 3. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. ¡LQH1C Miniature size (3.2Z1.6Z1.8mm) allows parallel mounting at 2.5mm pitch. Despite their small size, at 0.12µH these coils have a maximum current rating of 970mA. ¡LQH3C The low DC resistance means high current and high inductance. For inductance ranging from 0.15µH to 10µH, LQH3C coils have very low DC resistance. ¡LQH4C The LQH4C has miniature size 4.5mmZ3.2mm and realized low height 2.8mm max. LQH1C Type LQH3C Type LQH4C Type !DIMENSIONS LQH1C Type 2.3±0.2 1.8±0.2 3.2±0.3 1.6±0.2 1.6±0.2 EIA Code : 1206 LQH3C xx24 Series 0.7 0.7 0.7 min. min. min. 2.5±0.2 2.0±0.2 2.5±0.2 3.2±0.3 2.5±0.2 EIA Code : 1210 LQH3C xx34 Series 0.7 0.7 0.7 min. min. min. 2.5±0.2 2.0±0.2 2.5±0.2 3.2±0.3 2.5±0.2 EIA Code : 1210 0.9 1.3 0.9 ±0.3 ±0.2 ±0.3 LQH4C Type 3.6±0.2 3.2±0.2 2.6±0.2 4.5±0.3 3.2±0.2 3.2±0.2 EIA Code : 1812 (in mm) 1.0 min. 1.0 min. 1.0 min. 29 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS LQH1C Inductance Part Number LQH1CR12M04 LQH1CR22M04 LQH1CR47M04 LQH1C1R0M04 LQH1C2R2M04 LQH1C4R7M04 LQH1C100K04 LQH1C220K04 LQH1C470K04 LQH1C101K04 Nominal Value (µH) 100.12 100.22 100.47 101.0 102.2 104.7 110 122 147 100 Tolerance (%) Test Frequency DC Resistance (Ω) 10.08T40% 10.10T40% 10.15T40% 10.28T30% 10.41T30% 10.65T30% 11.30T30% 13.00T30% 18.00T30% 12.00T30% Self-resonant Frequency (MHz) Typ. 900 570 310 190 110 167 142 126 118 112 Min. 250 180 100 150 131 120 114 110 117 Allowable Current (mA) 970 850 700 510 430 340 230 160 100 180 Operating Temp. Range T20 1MHz Y25 to W85D T10 LQH3C Inductance Part Number LQH3CR15M24* LQH3CR27M24* LQH3CR47M24* LQH3C1R0M24* LQH3C2R2M24* LQH3C4R7M24* LQH3C100K24* LQH3C1R0M34 LQH3C2R2M34 LQH3C4R7M34 LQH3C100K34 LQH3C220K34 LQH3C470K34 LQH3C101K34 LQH3C221K34 LQH3C331K34 LQH3C391K34 LQH3C471K34 LQH3C561K34 *Low DC Resistance type. Nominal Value (µH) 100.15 100.27 100.47 101.0 102.2 104.7 110 101.0 102.2 104.7 110 122 147 100 220 330 390 470 560 Tolerance (%) Test Frequency DC Resistance (Ω) 10.028T30% 10.034T30% 10.042T30% 10.060T30% 10.097T30% 10.150T30% 10.300T30% 10.090T30% 10.130T30% 10.200T30% 10.440T30% 10.710T30% 11.310T30% 13.510T30% 18.410T30% 10.010T30% 17.010T30% 19.010T30% 22.010T30% Self-resonant Frequency (MHz) Typ. 680 490 370 200 120 177 150 150 100 166 140 127 119 113 108.5 107.0 106.6 106.2 105.7 Min. 400 250 150 100 164 143 126 196 164 143 126 119 115 110 106.8 105.6 105.0 Allowable Current (mA) 1450 1250 1100 1000 1790 1650 1450 1800 1600 1450 1300 1250 1170 1100 1170 Operating Temp. Range T20 T10 T20 1MHz Y25 to W85D T10 1160 1kHz LQH4C Inductance Part Number LQH4C1R0M04 LQH4C1R5M04 LQH4C2R2M04 LQH4C3R3M04 LQH4C4R7M04 LQH4C6R8M04 LQH4C100K04 LQH4C150K04 LQH4C220K04 LQH4C330K04 LQH4C470K04 LQH4C680K04 LQH4C101K04 LQH4C151K04 LQH4C221K04 LQH4C331K04 LQH4C471K04 Nominal Value (µH) 101.0 101.5 102.2 103.3 104.7 106.8 110 115 122 133 147 168 100 150 220 330 470 Tolerance (%) Test Frequency DC Resistance (Ω max.) 0.08 0.09 0.11 0.13 0.15 0.20 0.24 0.32 0.62 1.02 1.12 1.72 2.22 3.52 4.02 6.82 8.52 Self-resonant Frequency (MHz) 100 185 160 147 135 130 123 120 115 112 110 108.4 106.8 105.5 104.5 103.6 103.0 Allowable Current (mA) 1080 1000 1900 1800 1750 1720 1650 1570 1420 1310 1280 1220 1190 1130 1110 1100 1090 Operating Temp. Range T20 1MHz Y25 to W85D T10 1kHz 30 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS "Impedance - Frequency Characteristics LQH1C 1000 Impedance (kΩ) 100 10 1 0.1 0.01 0.01 0.1 1 10 100 1000 100µH 10µH !TYPICAL ELECTRICAL CHARACTERISTICS "Direct Current Characteristics LQH1C Inductance (µH) 1.0µH 100 100µH 10 10µH Fequency (MHz) LQH3C 1000 Impedance (kΩ) 100 10 1 0.1 0.01 0.01 0.1 1 10 100 1000 Inductance (µH) 100µH 10µH 1.0µH 1000 1 5 1.0µH 10 50 100 DC Current (mA) 500 LQH3C 100 100µH Fequency (MHz) LQH4C 1000 100 Impedance (kΩ) 10 1 0.1 0.01 0.01 100µH 10µH 1.0µH 10 10µH 1.0µH 1 0.1 1 10 100 DC Current (mA) 1000 LQH4C 1000 0.1 1 10 Fequency (MHz) 100 1000 Inductance (µH) 100 100µH 10µH 1.0µH 10 1 0.1 1 10 100 1000 10000 DC Current (mA) 31 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Multilayer Chip Coil LQG21C Series Low DC Resistance Choke for Power Lines Has Magnetically Shielded Structure The LQG21C series consists of magnetically shielded chip coil developed with original Murata multilayer process technology and incorporating magnetic materials. It has less than half the DC resistance of our conventional multilayer chip coils as well as high inductance. !FEATURES 1. The inductors have very low DC resistance. 2. The series has an inductance range of 1.0µH to 47µH. 3. Magnetically shielded structure provides excellent crosstalk characteristics. 4. Compact (2.0Z1.25mm) and lightweight. 5. Outstanding solder heat resistance. Either flow or reflow soldering methods can be employed. !DIMENSIONS 2.0T0.3 1.25T0.2 !APPLICATIONS ¡Power lines (for choke use) !TYPICAL ELECTRICAL CHARACTERISTICS ¡Impedance-Frequency Characteristics 10000 T 1000 Impedance (Ω) 100 µH 47 µH 22 µH 10 µH 4.7 H µ 2.2 µH 1.0 0.5T0.3 EIA Code : 0805 (in mm) 10 1 1 10 Frequency (MHz) 100 1000 Part Number LQG21C1R0N00Y100N00 LQG21C220N00Y470N00 T 0.85T0.2 1.25T0.2 !SPECIFICATIONS Inductance Part Number LQG21C1R0N00 LQG21C2R2N00 LQG21C4R7N00 LQG21C100N00 LQG21C220N00 LQG21C470N00 Nominal Value (µH) 1.0 2.2 4.7 10.0 22.0 47.0 T30 1MHz Tolerance (%) Test Frequency DC Resistance (Ω max.) 0.10 0.17 0.30 0.50 0.65 1.20 Self-resonant Frequency (MHz) Typ. 150 100 70 45 20 Min. 75.0 50.0 35.0 24.0 16.0 07.5 Allowable Current (mA) 60 40 30 15 13 07 Operating Temp. Range Y40 to W85D 32 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Multilayer Chip Coil LQG21F Series Magnetically Shielded Multilayer Chip Coil for Choke with Excellent Direct Current Characteristics LQG21F series consists of magnetically shielded chip coils based on Murata's technologies of multilayer process and magnetic materials. Excellent direct current characteristics are realized by using magnetic materials which have excellent saturation characteristics. The inductance of LQG21F is four times as large as that of conventional items. !FEATURES 1. LQG21F series is suitable for power line choke because of its excellent direct current characteristics. The series has larger rated current (60mA at 10µH) than conventional rated current. 2. Low DC resistance is realized. 3. The cross talk characteristics are excellent because of the use of magnetically shielded structure. 4. Small size (2.0Z1.25mm) and light weight. 5. The series has excellent solder heat resistance. Both flow and reflow soldering can be employed. !DIMENSIONS 0.5±0.3 !APPLICATIONS ¡Circuits for DC power line choke of telecommunication equipment such as DVC, digital camera, PDA, MD and DVD-RAM. 2.0±0.2 T 1.25±0.2 EIA Code : 0805 (in mm) Part Number LQG21F1R0N00Y2R2N00 LQG21F4R7N00Y470N00 T 0.85T0.2 1.25T0.2 !SPECIFICATIONS Inductance Part Number LQG21F1R0N00 LQG21F2R2N00 LQG21F4R7N00 LQG21F100N00 LQG21F220N00 LQG21F470N00 Nominal Value (µH) 11.0 12.2 14.7 10.0 22.0 47.0 T30 1MHz Tolerance (%) Test Frequency DC Resistance (Ω T30%) 0.20 0.28 0.30 0.50 0.35 0.60 Self-resonant Frequency (MHz Min.) 105.5 170.5 125.5 115.5 115.5 107.5 Allowable Current (mA) 220 150 80 60 13 7 Y40 to W85D Operating Temp. Range 33 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS ¡Impedance Frequency Characteristics 100000 ¡Direct Current Characteristics 100 47µH 10000 22µH Impedance (Ω) 1000 10µH 22µH 47µH Inductance (µH) 10 10µH 4.7µH 2.2µH 1 1.0µH 100 4.7µH 2.2µH 10 1.0µH 1 1 10 Frequency (MHz) 100 1000 0.1 1 10 DC Current (mA) 100 1000 34 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Multilayer Chip Coil LQG3216F Series Magnetically Shielded Multilayer Thin Type Chip Coil with Excellent Direct Current Characteristics LQG3216F series consists of magnetically shielded chip coils based on Murata's technologies of multilayer process and magnetic materials. Excellent direct current characteristics and low DC resistance are realized by using magnetic materials which have excellent saturation characteristics and high permeability. !FEATURES 1. LQG3216F series is suitable for power line choke because of its excellent direct current characteristics and large rated current. (70mA at 10µH) 2. Low DC resistance is realized. 3. The cross talk characteristics are excellent because of magnetically shielded structure. 4. Low profile 1.0mm. 5. The series has excellent solder heat resistance. Both flow and reflow soldering can be employed. !DIMENSIONS 0.7±0.3 ¡Circuits for DC power line choke of telecommunication equipments such as PDA, Note-PC, digital camera, PDA, DVC, MD and DVD-RAM. 1.0±0.2 !APPLICATIONS 3.2±0.2 1.6±0.2 (in mm) !SPECIFICATIONS Inductance Part Number Nominal Value (µH) 10 Tolerance (%) T20 Test Frequency 1MHz DC Resistance (Ω max.) 0.50 Self-resonant Frequency (MHz Min.) 20 Allowable Current (mA) 70 Operating Temp. Range Y40 to W85D LQG3216F100M00 35 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS ¡Impedance Frequency Characteristics 10000 ¡Direct Current Characteristics 100 1000 Inductance (µH) Impedance (Ω) 100 10 10 1 1 10 Frequency (MHz) 100 1000 1 1 10 DC Current (mA) 100 36 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Magnetically Shielded Choke Coil LQS33C Series Small Size, Low Profile and Magnetically Shielded Chip Coil for Choke Excellent for EL Back Light Driver Circuit !FEATURES 1. Low profile dimension (2.1mm max.) and small size of 1212 (3.3Z3.3mm) is suitable for portable equipment. 2. The series have low DC Resistance. 3. LQS33C series have large inductance of 560µH to 2200µH. 4. Magnetically shielded structure prevents interference occurring between peripheral components. !APPLICATIONS ¡For EL back light driver circuit !DIMENSIONS 3.3±0.3 2.1 max. 3.3±0.3 0.9 1.3 0.9 ±0.3 ±0.2 ±0.3 EIA Code : 1212 (in mm) !SPECIFICATIONS Inductance Part Number LQS33C561N34 LQS33C681N34 LQS33C102N34 LQS33C152N34 LQS33C222N34 Nominal Value (µH) 560 680 1000 1500 2200 T30 110kHz Tolerance (%) Test Frequency 100kHz DC Resistance (Ω T30%) 07.8 09.1 11.0 23.0 28.0 Self-resonant Frequency (MHz Min.) 3.0 2.6 2.1 1.7 1.5 Allowable Current (mA) 50 40 30 25 20 Y25 to W85D Operating Temp. Range 37 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS ¡Impedance Frequency Characteristics 1000 ¡Direct Current Characteristics 10000 LQS33C222N34 100 LQS33C222N34 Impedance (kΩ) Inductance (µH) LQS33C102N34 10 LQS33C561N34 1000 LQS33C102N34 LQS33C561N34 1 100 0.1 0.01 10 100 Frequency (kHz) 1000 10000 10 1 10 DC Current (mA) 100 38 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Large Current Choke Coil LQN6C/LQS66C Series Choke Coil for DC/DC Converters and DC Power Lines with Low DC Resistance, Large Current Capacity and Large Inductance The LQN6C/LQS66C series are choke coils which have achieved low direct current resistance, large current capacity and large inductance by using high performance thick wire wrapping technology. Because the LQS66C series has a shielded construction, it can be mounted in high density without interference occurring between peripheral components. They are optimum for use as choke coils in DC/DC converters and DC power supply circuits. !FEATURES 1. Both the LQN6C series with its open magnetic path construction and the LQS66C series with its magnetic shielding construction allow application to a wide variety of uses. 2. The inductance range covers from 0.12µH up to 10000µH allowing minute compatibility with the E6 series at 1µH to 1000µH. 3. Because the direct current resistance is small as well as the voltage drop and power consumption being small also, they are optimum for use as choke coils for DC power supply circuits. LQN6C LQS66C !DIMENSIONS LQN6C 5.0T0.3 5.0T0.3 !APPLICATIONS ¡Camcorders, portable AV equipment, etc. ¡DC/DC converters and DC power supplies. 5.7T0.3 4.7T0.3 1.3 min. 1.7 min. 1.3 min. EIA Code : 2220 LQS66C 6.3T0.3 6.3T0.3 6.3T0.3 4.7T0.3 1.3 min. 1.7 min. 1.3 min. EIA Code : 2525 (in mm) 39 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !SPECIFICATIONS LQN6C Inductance Part Number LQN6CR12M04 LQN6CR27M04 LQN6CR47M04 LQN6C1R0M04 LQN6C1R5M04 LQN6C2R2M04 LQN6C3R3M04 LQN6C4R7M04 LQN6C6R8M04 LQN6C100M04 LQN6C150M04 LQN6C220M04 LQN6C330M04 LQN6C470M04 LQN6C680M04 LQN6C101M04 LQN6C151M04 LQN6C221M04 LQN6C331M04 LQN6C471M04 LQN6C681M04 LQN6C102M04 LQN6C222M04 LQN6C472M04 LQN6C103M04 Nominal Value (µH) 10010.12 10010.27 10010.47 10011.0 10011.5 10012.2 10013.3 10014.7 10016.8 10110 10115 10122 10133 10147 10168 10100 10150 10220 10330 10470 10680 11000 12200 14700 10000 10kHz 100kHz T20 1MHz Tolerance (%) Test Frequency DC Resistance (ΩT40%) 100.007 100.010 100.013 100.019 100.022 100.029 100.036 100.041 100.074 100.093 100.15 100.19 100.32 100.40 100.67 100.86 101.9 102.4 104.4 105.4 108.1 110.3 121.5 143.6 100 Self-resonant Frequency (MHz min.) 450 300 200 150 110 180 140 130 125 120 117 115 112 110 117.6 116.5 115.0 114.0 113.1 112.4 111.9 111.7 111.2 110.8 110.5 Allowable Current (A) 6.04 5.34 4.84 4.04 3.74 3.24 2.94 2.74 2.04 1.74 1.44 1.24 0.94 0.84 0.64 0.56 0.42 0.32 0.27 0.24 0.19 0.15 0.10 0.07 0.05 Y25 to W80D Operating Temp. Range LQS66C Inductance Part Number LQS66CR27M04 LQS66CR68M04 LQS66C1R0M04 LQS66C1R5M04 LQS66C2R2M04 LQS66C3R3M04 LQS66C4R7M04 LQS66C6R8M04 LQS66C100M04 LQS66C150M04 LQS66C220M04 LQS66C330M04 LQS66C470M04 LQS66C680M04 LQS66C101M04 LQS66C151M04 LQS66C221M04 LQS66C331M04 LQS66C471M04 LQS66C681M04 LQS66C102M04 LQS66C222M04 LQS66C472M04 LQS66C103M04 Nominal Value (µH) 10010.27 10010.68 10011.0 10011.5 10012.2 10013.3 10014.7 10016.8 10010 10015 10022 10033 10047 10068 10100 10150 10220 10330 10470 10680 11000 12200 14700 10000 10kHz 100kHz T20 1MHz Tolerance (%) Test Frequency DC Resistance (ΩT40%) 10.007 10.010 10.013 10.016 10.019 10.022 10.025 10.029 10.036 10.069 10.087 10.14 10.17 10.29 10.36 10.63 10.79 11.8 12.2 13.9 14.9 19.4 19.5 39.7 Self-resonant Frequency (MHz min.) 300 180 150 110 180 140 130 125 120 117 115 112 110 107.6 106.5 105.0 104.0 103.2 102.5 102.0 101.7 101.2 100.8 100.5 Allowable Current (A) 6.06 5.36 4.76 3.86 3.36 2.66 2.26 1.86 1.66 1.36 1.16 0.86 0.76 0.60 0.52 0.42 0.35 0.28 0.24 0.20 0.16 0.10 0.07 0.05 Y25 to W80D Operating Temp. Range 40 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 !TYPICAL ELECTRICAL CHARACTERISTICS ¡Impedance - Frequency Characteristics LQN6C 1000000 100000 Impedance (Ω) 10000 1000 100 10 1 0.01 0.1 10000µH 1000µH 100µH 10µH Impedance (Ω) 1000000 100000 10000 1000 100 10 1 0.01 0.1 10000µH 1000µH 100µH 10µH LQS66C 1µH 1 10 100 1000 1µH 1 10 100 1000 Frequency (MHz) Frequency (MHz) ¡Direct Current Characteristics LQN6C LQS66C 10000 10000µH 10000 10000µH 1000 Inductance (µH) 1000µH Inductance (µH) 1000 1000µH 100 100µH 100 100µH 10 10µH 10 10µH 1 1µH 1 1µH 0.01 0.1 DC Current (A) 1 10 0.01 0.1 DC Current (A) 1 10 41 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Notice of Chip Coil 1. Standard Land Dimensions A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip coil electrode. Series LQG11N LQG21N LQG21C LQG21F LQG3216F LQP10A/11A LQG10A/11A Land Solder Resist (in mm) Standard Land Dimensions (Flow and Reflow) c b LQP10A/11A/LQG10A/11A : Reflow soldering should be applied.) LQH1N/1C LQN1A/1H LQN21A LQW1608A If mounted at 2.5mm intervals as indicated in the diagram at left, attention should be paid to potential magnetic coupling effects when using the coil as a resonator. Refer to the coupling factor graph in the typical electrical characteristics section. a b c a Type 0.4 0.5Y0.6 1.4Y1.5 LQG10A 0.6Y0.8 1.8Y2.2 0.6Y0.8 LQG11A 2.2Y2.6 Flow 0.7 0.7 LQG11N 1.8Y2.0 Reflow 3.0Y4.0 1.2 1.0 LQG21N/21C/21F 0.4 0.5Y0.6 1.4Y1.5 LQP10A 2.6 0.6 0.7 LQP11A 4.2Y5.2 2.0 1.2 LQG3216F a Type LQH1N/1C LQN1A/1H LQN21A LQW1608A c a 1.5 b 4.5 c 1.75 d 1.0 d b 1.2 3.0 1.1 0.8 0.7Y1.0 1.8Y2.0 0.6Y0.7 0.6Y0.8 c 2.5min. (LQW1608A : Reflow soldering should be applied.) 5.5 LQH3Cxx24 Series 2.0 1.0 LQS33N (LQS33N : Reflow soldering should be applied.) LQH3N LQH3Cxx34 Series 2.0 1.0 1.0 1.0 5.5 1.0 LQS33C (LQS33C : Reflow soldering should be applied.) LQH4N LQN4N LQH4C 1.0 1.3 7.5 1.0 3.0 1.5 1.5 1.5 1.5 LQN6C 8.0 LQS66C 3.5 (LQN6C/LQS66C : Reflow soldering should be applied.) 3.0 2.0 3.0 42 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Notice of Chip Coil 2. Mounting Instructions 1Land Pattern Dimensions Large lands reduce Q of the mounted chip. Also, large protruding land areas (bordered by lines having dimensions c and d shown below) cause floating and electrode cracks. Land Solder Resist 4Amount of Solder Paste Excessive solder causes electrode corrosion, while insufficient solder causes low electrode bonding strength. Adjust the amount of solder paste so that solder is applied as shown below. c LQH/LQN d LQS 2Magnetic Coupling Since some chip coils are constructed like an open magnetic circuit, narrow spacing between coils may cause magnetic coupling. (Please refer to Page 54 for coil-to-coil spacing and coupling coefficient.) The LQS and LQG series have a magnetically shielded structure. The structure makes their coupling coefficient smaller than that of conventional chip coils. In particular, the LQS33N series has a very small coupling coefficient. Magnetic Coupling LQP/LQG LQW "Standard thickness of solder paste : 200 to 300µm (LQP10A : 100µm, LQG Series, LQP11A/LQW1608A : 100µm to 150µm) 5Amount of Adhesive If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering. Apply the adhesive in accordance with the following conditions. 3PCB Warping Arrange chip coils to minimize stress caused by PCB warping. LQH/LQN LQG Fig. 1 Fig. 2 LQG11N LQG21N/21C/21F LQG3216F LQN21A LQH1N/1C LQN1A/1H LQH3N/3C LQH(N)4N/4C Typical Application Amount (in mg) UVS-50R-2 NF-3000 MR-8153RA 0.06Y0.07 0.06Y0.07 0.05Y0.06 0.20Y0.25 0.20Y0.25 0.15Y0.20 0.25Y0.30 0.25Y0.30 0.20Y0.25 0.21Y0.23 0.21Y0.23 0.16Y0.18 0.18Y0.20 0.20Y0.23 0.45Y0.50 0.20Y0.25 0.27Y0.35 0.60Y0.80 0.20Y0.25 0.27Y0.35 0.60Y0.80 The arrangement shown in Fig. 2 is more effective in preventing stress than that shown in Fig. 1. 43 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Notice of Chip Coil 3. Standard Soldering Conditions 1Soldering Method Chip coils can be flow or reflow soldered. (LQS33N, LQS66C and LQP11A should only be reflow soldered) Please contact Murata regarding other soldering methods. The volume of solder can cause minor fluctuations in inductance value. Therefore, carefully control the amount of solder when soldering the LQP10A/11A, LQG10A/11A and LQW1608A series. 2Soldering Temperature and Time Solder within the temperature and time combinations indicated by the slanted lines in the following graphs. If soldering is repeated, please note that the allowed time is the accumulated time. 4Standard Soldering Conditions ¡Flow Solder Pre-heating (in air) Temperature (D) 200 100 0 Soldering 240D Gradual Cooling (in air) 1 minute min. 3 sec. max. ¡Reflow Solder ¡Allowable Flow Soldering Temperature and Time Solder : H60A Pre-heating (in air) Temperature (D) 260 Temperature (˚C) 200 100 0 1 minute min. T Soldering 230D Gradual Cooling (in air) 240 220 200 180 LQG11N LQN21A LQG21N/21C/21F LQG3216F LQN1A/1H LQH1N/1C LQH3N/3C LQH(N)4N/4C 0 10 Time (sec.) 20 30 Series Pre-heating Soldering Time Soldering Temp. (150D) (D) (T) ¡Allowable Reflow Soldering Temperature and Time 280 Solder : H60A 260 Temperature (˚C) LQG11A 240 220 LQW1608A LQN21A LQN1A/1H LQN4N LQN6C 0 20 200 180 LQG11N LQG10A LQP10A LQP11A LQG21N/21C/21F LQG3216F LQHSeries LQS33N/33C LQS66C 40 LQG21N/21C/21F LQG3216F LQH1N/1C LQN1A/1H 10 sec. max. LQW1608A 60 sec. min. LQN21A LQH3N/3C LQH4N/LQN4N/LQH4C LQS33N/33C LQN6C/LQS66C 20 sec. max. LQG10A/11A/LQP10A/11A 230 60 80 100 Time (sec.) 3Solder and Flux Solder : Use H60A, H63A, (JIS Z 3282) or equivalent. Use solder paste equivalent to H60A for LQP10A/11A and LQG10A/11A. Flux : Use rosin-based flux, but not strongly acidic flux (with chlorine content exceeding 0.2wt%). Do not use water - soluble flux. 5Reworking with Soldering Iron Preheating at 150D for 1minute is required. Do not directly touch the ceramic element with the tip of the soldering iron. The reworking soldering conditions are as follows. Soldering iron power output : 30W max. Temperature of soldering iron tip : 280D Diameter of soldering iron end : 3.0mm max. Soldering time : within 3 sec. 44 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Notice of Chip Coil 4. Cleaning The following conditions should be observed when cleaning chip coils. 1 Cleaning Temperature : 60D max. (40D max. for CFC alternatives and alcohol cleaning agents) 2 Ultrasonic Output : 20W/R max. Duration : 5 minutes max. Frequency : 28 to 40kHz Care should be taken not to cause resonance of the PCB and mounted products. 3 Cleaning Agent The following cleaning agents have been tested on individual components. Evaluation in complete assembly should be done prior to production. a) CFC alternatives and alcohol cleaning agents #Isopropyl alcohol (IPA) #HCFC-225 b) Aqueous cleaning agents #Surface active agent (Clean Thru 750H) #High grade alcohol (Pine Alpha ST-100S) #Hydrocarbon (Techno Cleaner 335) #Alkaline saponifier (Aqua Cleaner 240-cleaner should be diluted to 20% using deionized water.) LQS series : Aqueous agents should not be used because they may cause quality deterioration. LQH series : Surface active agent and high grade alcohol can be used. 4 Ensure that flux residue is completely removed. Component should be thoroughly dried after aqueous agents have been removed with deionized water. For additional cleaning methods, please contact Murata. ¡LQP Series # The pattern of the chip coil is covered with the protection film. But the handling the chip coil shall be taken care so that the chip coil would not be damaged with the pick-up nozzle, the sharp substance and so on. ¡LQG -N/ -C/ -F Series # There is possibility that the inductance value change due to magnetism. Don't use a magnet or a pair of tweezers with magnetism when chip coil are handled. (The tip of the tweezers should be molded with resin or pottery.) 7. Handling 1 Avoid applying excessive stress to products to prevent damage. 2 Do not touch winding with sharp objects such as tweezers to prevent wire breakage. 3 Do not apply excessive force to products mounted on boards to prevent core breakage. 8. Operating Environment Do not use products in corrosive gases atmosphere such as chlorine gas, acid or sulfide gas. 9. Storage Requirements 1 Storage Period Products should be used within 12 months reckon from the date of our out-going inspection. Solderability should be verified if this period is exceeded. (LQS33N/33C, LQP21A series should be used within 6 months.) 2 Storage conditions a) Store products in a warehouse in compliance with the following conditions : Temperature : Y10 to 40D Humidity : 30 to 70% (relative humidity) Do not subject products to rapid changes in temperature and humidity. Do not store them in corrosive gases atmosphere such as one containing sulfurous acid gas or alkaline gas. This will prevent electrode oxidation which causes poor solderability and possible corrosion of coils. b) Do not store products in bulk packaging to prevent collision among coils which causes core chipping and wire breakage. c) Store products on pallets to protect from humidity, dust, etc. d) Avoid heat shock, vibration, direct sunlight, etc. 5. Resin Coating When coating products with resin, the relatively high resin curing stress may change inductance values. For exterior coating, select resin carefully so that electrical and mechanical performance of the product is not affected. 6. Caution for Use This item is designed to have sufficient strength, but handle with care not to make it chipped or broken due to its ceramic structure. ¡LQW Series # Sharp material, such as a pair of tweezers, shall not touch to the winding portion to prevent the breaking of wire. # Do not give excessive mechanical shock to the products mounted on the board to prevent the breaking of the core. # In some mounting machines, when picking up components support pin pushes up the components from the bottom of base tape. In this case, please remove the support pin. The support pin may damage the components and break wire. ¡LQH/LQN Series # Sharp material, such as a pair of tweezers, shall not touch to the winding portion to prevent the breaking of wire. # Do not give excessive mechanical shock to the products mounted on the board to prevent the breaking of the core. 10. Transportations Do not apply excessive vibration or mechanical shock to products. 45 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Dimensions of Taping LQG21N/21C/21F, LQG3216F, LQG10A/11A/11N, LQH1N/1C, LQN1A/1H, LQN21A, LQH3N/3C, LQP10A/11A, LQW1608A (8mm Tape) ¡Paper Tape Minimum Quantity Series LQG21NR10K10Y2R2K10 LQG21C1R0N00Y100N00 LQG21F1R0N00Y2R2N00 LQG10A LQG11A LQG11N LQP10A LQP11A LQW1608A ¡Plastic Tape LQG10A/LQP10A/LQW1608A *1 : 2.0±0.05 *2 : 1.0±0.05 *3 : 8.0±0.2 a b c φ180mm Reel 14,000 10,000 14,000 10,000 14,000 φ330mm Reel 10,000 50,000 10,000 Y 10,000 1.75±0.1 φ 1.5 +0.1 -0 0.2 1.45 2.25 0.62 1.12 1.05 1.85 0.70 1.20 1.19 2.00 1.10 1.00 1.1 (2.75) 3.5±0.1 1.0 1.1 1.0 1.1 a *1 4.0±0.1 *2 *1 4.0±0.1 *3 8.0±0.3 C b C 2.0±0.1 Direction of Feed Minimum Quantity Series LQG21N2R7K10Y4R7K10 LQG21C220N00Y470N00 LQG21F4R7N00Y470N00 LQG3216F LQH1N/1C · LQN1A/1H LQN21A LQH3N/LQH3C a b c φ180mm Reel φ330mm Reel 1.55 2.3 3.5 3.6 2.3 3.6 1.35 3,000 10,000 1.90 1.75 2.90 2.05 2.15 2,000 17,500 (in mm) LQS33N/33C, LQH(N)4N, LQH4C, LQN6C, LQS66C (12mm Tape) 8.0T0.1 5.5T0.1 1.75T0.1 2.0T0.1 4.0T0.1 φ1.5 +0.1 -0 d Minimum Quantity Series 12.0T0.3 a 3.9 3.6 5.4 6.7 b 3.7 4.9 6.1 6.7 c 1.9 2.7 5.0 5.2 d a Direction of Feed C LQS33N/LQS33C LQH(N)4N LQH4C LQN6C LQS66C φ180mm Reel 1,000 1,500 1,350 φ330mm Reel Y 2,500 Y 1,500 Y 0.3 (4.75) b 0.4 (in mm) 46 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 CHIP COIL Design Kit !DESIGN KIT Various chip coils are available in design kits assembled according to application. No. 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 Part Number LQN21A22NJ04 LQN21A27NJ04 LQN21A33NJ04 LQN21A39NJ04 LQN21A47NJ04 LQN21A56NJ04 LQN21A68NJ04 LQN21A82NJ04 LQN21AR10J04 LQN21AR12J04 LQN21AR15J04 LQN21AR18J04 LQN21AR22J04 LQN1H54NK04 LQN1H95NK04 LQN1HR14K04 LQN1HR21K04 LQN1HR29K04 LQN1HR39K04 LQN1HR50K04 LQN1HR61K04 LQN1HR75K04 LQN1HR88K04 LQP10A1N0C00 LQP10A1N2C00 LQP10A1N5C00 LQP10A1N8C00 LQP10A2N2C00 LQP10A2N7C00 LQP10A3N3C00 LQP10A3N9C00 LQP10A4N7C00 LQP10A5N6C00 LQP10A6N8C00 LQP10A8N2C00 LQP10A10NG00 LQP10A12NG00 LQP10A15NG00 LQP10A18NG00 LQP10A22NG00 LQP10A27NG00 LQP10A33NG00 LQP11A1N3C00 LQP11A1N5C00 LQP11A1N8C00 LQP11A2N2C00 LQP11A2N7C00 LQP11A3N3C00 LQP11A3N9C00 LQP11A4N7C00 LQP11A5N6C00 LQP11A6N8C00 LQP11A8N2C00 LQP11A10NG00 LQP11A12NG00 LQP11A15NG00 LQP11A18NG00 LQP11A22NG00 LQP11A27NG00 LQP11A33NG00 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Part Number : EKLB11EB Contents : LQW1608A/LQN21A/LQN1H/ : LQP10A/LQP11A EKLB11EB No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Part Number LQW1608A3N9D00 LQW1608A4N7D00 LQW1608A5N6D00 LQW1608A6N8D00 LQW1608A8N2D00 LQW1608A10NJ00 LQW1608A12NJ00 LQW1608A15NJ00 LQW1608A18NJ00 LQW1608A22NJ00 LQW1608A27NJ00 LQW1608A33NJ00 LQW1608A39NJ00 LQW1608A47NJ00 LQW1608A56NJ00 LQW1608A68NJ00 LQW1608A82NJ00 LQW1608AR10J00 LQW1608AR12J00 LQW1608AR15J00 LQW1608AR18J00 LQW1608AR22J00 LQN21A3N3D04 LQN21A6N8D04 LQN21A8N2D04 LQN21A10NJ04 LQN21A12NJ04 LQN21A15NJ04 LQN21A18NJ04 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 "Please use the products in this Design Kit for experiment or test production, but do not use for mass production. When useing for mass production, please order them after confirming detailed specifications by approving the appropriate individual specifications sheet. 47 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Part Number : EKLB21EB Contents : LQH3C/LQH3N/LQH4C/LQH4N/LQN4N EKLB21EB No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 Part Number LQH3C1R0M34 LQH3C2R2M34 LQH3C4R7M34 LQH3C100K34 LQH3C470K34 LQH3C221K34 LQH3C391K34 LQH3C561K34 LQH3NR10M34 LQH3NR18M34 LQH3NR27M34 LQH3NR39M34 LQH3NR56M34 LQH3NR68M34 LQH3NR82M34 LQH3N1R0M34 LQH3N1R5K34 LQH3N2R2K34 LQH3N3R3K34 LQH3N4R7K34 LQH3N6R8K34 LQH3N100K34 LQH3N120K34 LQH3N150K34 LQH3N220K34 LQH3N330K34 LQH3N470K34 LQH3N680K34 LQH3N101K34 LQH3N121K34 LQH3N181K34 LQH3N271K34 LQH3N391K34 LQH3N561K34 LQH4C1R0M04 LQH4C1R5M04 LQH4C2R2M04 LQH4C3R3M04 LQH4C4R7M04 LQH4C6R8M04 LQH4C100K04 LQH4C150K04 LQH4C220K04 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 No. 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 Part Number LQH4C330K04 LQH4C470K04 LQH4C680K04 LQH4C101K04 LQH4C151K04 LQH4C221K04 LQH4C331K04 LQH4C471K04 LQH4N180K04 LQH4N270K04 LQH4N390K04 LQH4N560K04 LQH4N820K04 LQH4N121K04 LQH4N221K04 LQH4N331K04 LQH4N471K04 LQH4N681K04 LQH4N821K04 LQH4N102K04 LQH4N122K04 LQH4N152K04 LQN4N182K04 LQN4N222K04 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 "Please use the products in this Design Kit for experiment or test production, but do not use for mass production. When useing for mass production, please order them after confirming detailed specifications by approving the appropriate individual specification sheet. 48 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Part Number EKLM11UB EKLM12UA EKLM13UA EKLM14UB EKLM15UA EKLM16UA EKLM17UA EKLM21UA Contents LQP11A LQN21A LQG11A LQP10A LQG10A LQW1608A tight tolerance (T2% 0.2nH) LQW1608A tolerance (T5% 0.5nH) LQG21N/LQG21C EKLM11UB No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Part Number LQP11A1N3C00 LQP11A1N5C00 LQP11A1N8C00 LQP11A2N2C00 LQP11A2N7C00 LQP11A3N3C00 LQP11A3N9C00 LQP11A4N7C00 LQP11A5N6C00 LQP11A6N8C00 LQP11A8N2C00 LQP11A10NG00 LQP11A12NG00 LQP11A15NG00 LQP11A18NG00 LQP11A22NG00 LQP11A27NG00 LQP11A33NG00 LQP11A39NG00 LQP11A47NG00 LQP11A56NG00 LQP11A68NG00 LQP11A82NG00 LQP11AR10G00 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 EKLM12UA No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part Number LQN21A3N3D04 LQN21A6N8D04 LQN21A8N2D04 LQN21A10NJ04 LQN21A12NJ04 LQN21A15NJ04 LQN21A18NJ04 LQN21A22NJ04 LQN21A27NJ04 LQN21A33NJ04 LQN21A39NJ04 LQN21A47NJ04 LQN21A56NJ04 LQN21A68NJ04 LQN21A82NJ04 LQN21AR10J04 LQN21AR12J04 LQN21AR15J04 LQN21AR18J04 LQN21AR22J04 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 EKLM13UA No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Part Number LQG11A1N2S00 LQG11A1N5S00 LQG11A1N8S00 LQG11A2N2S00 LQG11A2N7S00 LQG11A3N3S00 LQG11A3N9S00 LQG11A4N7S00 LQG11A5N6S00 LQG11A6N8J00 LQG11A8N2J00 LQG11A10NJ00 LQG11A12NJ00 LQG11A15NJ00 LQG11A18NJ00 LQG11A22NJ00 LQG11A27NJ00 LQG11A33NJ00 LQG11A39NJ00 LQG11A47NJ00 LQG11A56NJ00 LQG11A68NJ00 LQG11A82NJ00 LQG11AR10J00 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 "Please use the products in this Design Kit for experiment or test production, but do not use for mass production. When useing for mass production, please order them after confirming detailed specifications by approving the appropriate individual specification sheet. 49 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 EKLM14UB No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Part Number LQP10A1N0B00 LQP10A1N1B00 LQP10A1N2B00 LQP10A1N3B00 LQP10A1N5B00 LQP10A1N6B00 LQP10A1N8B00 LQP10A2N0B00 LQP10A2N2B00 LQP10A2N4B00 LQP10A2N7B00 LQP10A3N0B00 LQP10A3N3B00 LQP10A3N6B00 LQP10A3N9B00 LQP10A4N3B00 LQP10A4N7B00 LQP10A5N1B00 LQP10A5N6B00 LQP10A6N2B00 LQP10A6N8B00 LQP10A7N5B00 LQP10A8N2B00 LQP10A9N1B00 LQP10A10NG00 LQP10A12NG00 LQP10A15NG00 LQP10A18NG00 LQP10A22NG00 LQP10A27NG00 LQP10A33NG00 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 EKLM15UA No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Part Number LQG10A1N2S00 LQG10A1N5S00 LQG10A1N8S00 LQG10A2N2S00 LQG10A2N7S00 LQG10A3N3S00 LQG10A3N9S00 LQG10A4N7S00 LQG10A5N6S00 LQG10A6N8J00 LQG10A8N2J00 LQG10A10NJ00 LQG10A12NJ00 LQG10A15NJ00 LQG10A18NJ00 LQG10A22NJ00 LQG10A27NJ00 LQG10A33NJ00 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 EKLM16UA No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 QTY. (pcs.) Part Number 20 LQW1608A3N9C00 20 LQW1608A5N6C00 20 LQW1608A6N8C00 20 LQW1608A10NG00 20 LQW1608A12NG00 20 LQW1608A15NG00 20 LQW1608A18NG00 20 LQW1608A22NG00 20 LQW1608A27NG00 20 LQW1608A33NG00 20 LQW1608A39NG00 20 LQW1608A47NG00 20 LQW1608A56NG00 20 LQW1608A68NG00 20 LQW1608A82NG00 20 LQW1608AR10G00 20 LQW1608AR12G00 20 LQW1608AR15G00 20 LQW1608AR18G00 20 LQW1608AR22G00 EKLM17UA No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 QTY. (pcs.) Part Number 20 LQW1608A3N9D00 20 LQW1608A4N7D00 20 LQW1608A5N6D00 20 LQW1608A6N8D00 20 LQW1608A8N2D00 20 LQW1608A10NJ00 20 LQW1608A12NJ00 20 LQW1608A15NJ00 20 LQW1608A18NJ00 20 LQW1608A22NJ00 20 LQW1608A27NJ00 20 LQW1608A33NJ00 20 LQW1608A39NJ00 20 LQW1608A47NJ00 20 LQW1608A56NJ00 20 LQW1608A68NJ00 20 LQW1608A82NJ00 20 LQW1608AR10J00 20 LQW1608AR12J00 20 LQW1608AR15J00 20 LQW1608AR18J00 20 LQW1608AR22J00 EKLM21UA No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Part Number LQG21NR10K10 LQG21NR12K10 LQG21NR15K10 LQG21NR18K10 LQG21NR22K10 LQG21NR27K10 LQG21NR33K10 LQG21NR39K10 LQG21NR47K10 LQG21NR56K10 LQG21NR68K10 LQG21NR82K10 LQG21N1R0K10 LQG21N1R2K10 LQG21N1R5K10 LQG21N1R8K10 LQG21N2R2K10 LQG21N2R7K10 LQG21N3R3K10 LQG21N3R9K10 LQG21N4R7K10 LQG21C1R0N00 LQG21C2R2N00 LQG21C4R7N00 LQG21C100N00 LQG21C220N00 LQG21C470N00 QTY. (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 "Please use the products in this Design Kit for experiment or test production, but do not use for mass production. When useing for mass production, please order them after confirming detailed specifications by approving the appropriate individual specification sheet. 50 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Information of Chip Coil 1. Land Area and Q-F Characteristics PCB : Ag-Pb printed land formed on 0.6mm-thick alumina plate Solder : H60A Soldering : Reflow soldering Solder layer : Sections shown by oblique lines in figure 100 A : Characteristic of coil itself 80 2 2.5 B: 1 60 C: Q 2.5 40 1 2.5 (in mm) Characteristic of chip mounted on land B 1.3 1 5.5 1 Characteristic of chip mounted on land A C 20 0 10k 50k 100k 500k Frequency (Hz) 1M 5M 2. Coupling coefficient versus Coil-to-coil Spacing 14 Coil-to-coil Spacing 12 10 Coupling Coefficient (%) 8 6 4 330µH 1µH 2 0 0 1 2 3 Coil-to-coil Spacing (mm) 4 5 6 51 This is the PDF file of catalog No.O05E-5. No.O05E5.pdf 00.3.15 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one of our products for other applications than specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of February 2000. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or product engineers. 4. The parts numbers and specifications listed in this catalog are for information only. You are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. 5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us. http://www.murata.co.jp/products/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-955-6502 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp
LQH3N221K34 价格&库存

很抱歉,暂时无法提供与“LQH3N221K34”相匹配的价格&库存,您可以联系我们找货

免费人工找货