APE3014H

VDE Pending THE SLIM POWER RELAY PE-RELAYS Insulation complying to following standards: EN 60255 General specification for electrical relays EN 60335 For use in house-hold appliances EN 60730 For use in temperature sensing appliances EN 60950 For use in electrical business equipment EN 60065 For use in entertainment electronics (radio, HiFi-sets) EN 50178 For use in industrial range FEATURES 5 .197 28 1.102 15 .591 • Slim size 28 mm (L)×5 mm (W)×15 mm (H) 1.102 inch (L)×.197 inch (W)×.591 inch (H) permits high density mounting • Wide switching capacity: 100 mA/12 V DC-6A/250 V AC • High sensitivity: 170mW • High breakdown (4,000 V) and surge (6,000 V) voltage between contacts and coil • Clearance/creepage distance: 8/8 mm • 1 Form A/1 Form C contact. SPECIFICATIONS Contacts Arrangement Contact material Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Nominal switching capacity Rating (resis- Maximum switching power tive) Maximum switching voltage Max. switching current Expected life Mechanical (at 180 cpm) (min.operaElectrical (at 6 cpm) tions) (at rated load) 1 Form A, 1 Form C Au-plated Silver alloy silver alloy 100 mΩ 30 mΩ Characteristics Initial insulation resistance*1 Between open contacts Initial breakdown voltage*2 Between contacts and coil Surge voltage between contacts and coil*3 Operate time*4 (at nominal voltage) Release time (without diode)*4 (at nominal voltage) Temperature rise Min. 1,000 MΩ at 500 V DC 1,000 Vrms 4,000 Vrms Min. 6,000 V (Initial) Max. 8 ms (approx. 5 ms) Max. 4 ms (approx. 2.5 ms) Max. 30°C with nominal coil voltage across coil and at nominal switching capacity 1 Form C: Min. 49 m/s2{5 G} 1 Form A: Min. 98 m/s2{10 G} Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 1.0 mm/6 G 10 to 55 Hz at double amplitude of 1.5 mm/9 G –40°C to +85°C –40°F to +185°F 5 to 85%R.H. Approx. 4 g .14 oz 6 A 250 V AC 1,500 VA 400 V AC/300 V DC 6 A (AC) 5×106 N.O.: 5×104 N.C.: 3×104 170 mW (4.5 to 24 V DC) 217 mW (48 V DC) Coil (at 25°C 77°F, 50% R.H.) Nominal operating power Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Intial breakdown voltage" section *2 Detection current: 10mA *3 Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981 *4 Excluding contact bounce time *5 Half-wave pulse of sine wave: 50ms; detection time: 10µs *6 Half-wave pulse of sine wave: 11ms *7 Detection time: 10µs *8 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61). Shock resistance Functional*5 Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, Ambient transport and storage*8 temp. (Not freezing and condensHumidity ing at low temperature) Unit weight TYPICAL APPLICATIONS • Interface relays for programmable controllers • Output relays for measuring equipment, timers, counters and temperature controllers • Industrial equipment, office equipment • House-hold appliances for Europe ORDERING INFORMATION Ex. APE 0 Contact arrangement 1: 1 Form A 3: 1 Form C Contact type 0: Single contact Contact material 0: Silver alloy 1: Au-plated silver alloy Coil voltage (DC) 4H: 4.5 V 18: 18 V 06: 6 V 24: 24 V 12: 12 V 48: 48 V (Notes) 1. Standard packing: Tube: 20 pcs.; Case: 1,000 pcs. 2. 5 V, 60 V type is also available. 3. 1 Form B is also available. 211 PE TYPES AND COIL DATA (at 20°C 68°F) Part No. APE1004H APE10006 APE10012 APE10018 APE10024 APE10048 APE1014H APE10106 APE10112 APE10118 APE10124 APE10148 APE3004H APE30006 APE30012 APE30018 APE30024 APE30048 APE3014H APE30106 APE30112 APE30118 APE30124 APE30148 Contact arrangement Nominal voltage, V DC 4.5 6 12 18 24 48 4.5 6 12 18 24 48 4.5 6 12 18 24 48 4.5 6 12 18 24 48 Pick-up voltage, (Initial) V DC (max.) 2.97 3.96 7.92 11.88 15.84 31.68 2.97 3.96 7.92 11.88 15.84 31.68 2.97 3.96 7.92 11.88 15.84 31.68 2.97 3.96 7.92 11.88 15.84 31.68 Drop-out voltage, (Initial) V DC (min.) 0.225 0.3 0.6 0.9 1.2 2.4 0.225 0.3 0.6 0.9 1.2 2.4 0.225 0.3 0.6 0.9 1.2 2.4 0.225 0.3 0.6 0.9 1.2 2.4 Nominal operating current, mA (±10%) 38 28 14 9 7 5 38 28 14 9 7 5 38 28 14 9 7 5 38 28 14 9 7 5 Nominal operating power, mW Coil resistance, Ω (±10%) 119 212 847 1,906 3,388 10,618 119 212 847 1,906 3,388 10,618 119 212 847 1,906 3,388 10,618 119 212 847 1,906 3,388 10,618 Max. allowable voltage, V DC 5.4 7.2 14.4 21.6 28.8 57.6 5.4 7.2 14.4 21.6 28.8 57.6 5.4 7.2 14.4 21.6 28.8 57.6 5.4 7.2 14.4 21.6 28.8 57.6 mm inch PC board pattern (Bottom view) 2-1 . 2-.0 0 dia. 39 dia . 2-1 . 2-. 3 dia 05 . 1d ia. 1 Form A (without Auplated) 170 217 1 Form A (with Au-plated) 170 217 1 Form C (without Auplated) 170 217 1 Form C (with Au-plated) 170 217 DIMENSIONS 1. 1 Form A type 15.0max. .591max. 0.5 .020 0.3 +0.2 –0.1 .012 +.008 –.004 1.2 .047 3.5 .138 2-0.5 2-.020 3.78 .149 21.42 .843 28.0max. 1.102max. 5.04 .198 2-1.0 2-.039 1.9 .075 0.4 +0.2 –0.1 .016 +.008 –.004 1.2 .047 5.0max. .197max. 3.78 .149 1.2 .047 21.42 .843 5.04 .198 1.9 .075 Tolerance: ±0.1 ±.004 Schematic (Bottom view) Coil COM NO General tolerance: ±0.3 ±.012 2. 1 Form C type PC board pattern (Bottom view) 2-1 . 2-.0 0 dia. 39 dia . 3-1 . 3-. 3 dia 05 . 1d ia. 15.0max. .591max. 0.5 .020 0.3 +0.2 –0.1 .012 +.008 –.004 1.2 .047 3.5 .138 2-0.5 2-.020 3.78 .149 21.42 5.04 5.04 .843 .198 .198 28.0max. 1.102max. 3-1.0 3-.039 1.9 .075 0.4 +0.2 –0.1 .016 +.008 –.004 1.2 .047 5.0max. .197max. 3.78 .149 1.2 .047 5.04 5.04 .198 .198 21.42 .843 1.9 .075 Tolerance: ±0.1 ±.004 Schematic (Bottom view) Coil NC COM NO General tolerance: ±0.3 ±.012 212 PE REFERENCE DATA 1. Max. switching capacity 2. Coil temperature rise Sample: APE30012 Measured portion: Inside the coil Ambient temperature: 28°C 82°F 10 6 5 4 3 2 1 0.5 0.4 0.3 0.2 90 80 Temperature rise, °C 70 60 50 40 30 20 10 10 20 30 50 100 Contact voltage, V 300 0 100 110 120 130 Coil applied voltage, %V -40 -20 0 -10 -20 -30 -40 20 6A 0A 3. Ambient temperature characteristics Sample: APE30012 No. of samples: n = 6 40 30 20 10 40 60 85 Drop-out voltage Pick-up voltage Contact current, A Rate of change, % Ambient temperature, °C NOTES Rating Standard File No. UL E43149 VDE Rating 6 A 277 V AC 6 A 250 V AC (cosφ = 1) 122402ÜG 1 A 250 V AC (cosφ = 0.4) 6 A 250 V AC CH-99.1 10483.2A1 (cosφ = 1) SEV For Cautions for Use, see Relay Technical Information (Page 48 to 76). 9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, 213 Ltd. Go To Online Catalog