EEUFP1E102B

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FP Type : A Features Country of origin ● High ● Malaysia ripple current (2 to 2.5 times as high as FC series) capacitance (Up to 60 % larger than FC series) ● Endurance : 105 °C 4000 h to 5000 h ● RoHS compliant ● Large Specifications Category temperature range –55 °C to +105 °C Rated voltage range 25 V.DC to 35 V.DC Capacitance range 510 µF to 2000 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes 25 35 (max.) (120 Hz/+20 °C) 0.14 0.12 Add 0.02 per 1000 µF for products of 1000 µF or more. Leakage current V.DC tan d Dissipation factor (tan d) After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 010 : 4000 hours, 012.5 : 5000 hours Endurance Capacitance change Within ±30 % of the initial value < 300 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) AEC-Q200 compliant Shelf life AEC-Q200 Frequency correction factor for ripple current Rated voltage (V.DC) Frequency (Hz) Capacitance (µF) 25 to 35 120 1k 10 k 100 k to 510 to 1000 0.65 0.75 0.95 1.00 1200 to 2000 0.75 0.80 1.00 1.00 Sleeve Pressure relief fd±0.05 Dimensions + (Unit : mm) L✽ ✽ L < 16 : L±1.5 L > 20 : L±2.0 14 min. 3 min. 0D±0.5 F±0.5 – 0D L 0d F 10 16 to 20 0.6 5.0 12.5 20 to 25 0.6 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2018 Aluminum Electrolytic Capacitors (Radial Lead Type) Case size/ Impedance/ Ripple current Rated voltage (V.DC) 25 V.DC to 35 V.DC ESR (Ω/100 kHz) Case size (mm) (0D×L) +20 °C –10 °C Ripple current (mA r.m.s./100 kHz) +105 °C 10 × 16 0.068 0.136 2500 10 × 20 0.052 0.104 3000 12.5 × 20 0.038 0.076 3250 12.5 × 25 0.030 0.060 4000 Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 0D L 680 1000 1500 2000 510 750 1000 1300 10 10 12.5 12.5 10 10 12.5 12.5 16 20 20 25 16 20 20 25 25 35 Specification Ripple ESR current Endurance (100 kHz) (100 kHz) (hours) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 2500 0.068 4000 3000 0.052 4000 3250 0.038 5000 4000 0.030 5000 2500 0.068 4000 3000 0.052 4000 3250 0.038 5000 4000 0.030 5000 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. 0d Taping Straight ✽B 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Part No. EEUFP1E681( ) EEUFP1E102( ) EEUFP1E152( ) EEUFP1E202( ) EEUFP1V511( ) EEUFP1V751( ) EEUFP1V102( ) EEUFP1V132( ) Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 500 500 500 500 500 500 500 500 · When requesting taped product, please put the letter "B". Lead wire pitch ✽B=5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2018