ERJ-MP4QF5M0U

Current Sensing Resistors, Metal Plate Type Current Sensing Resistors, Metal Plate Type Type: ERJ MP2, MP3, MP4 Features ● Ideal for current sensing solution ● Small case size with high power ● Metal plate bonding technology. Excellent long term stability ● Outer Resin with high heat dissipation. Wide temperature range ● AEC-Q200 qualified ● RoHS compliant ● ISO9001, ISO/TS16949 certified (−65 °C to +170 °C) ■ As for Packaging Methods, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E R J M P 4 P F 1 0 M U Product Code Metal Plate Chip Resistors Type Code Code Inch size 1206 P2 2010 P3 2512 P4 Power Rating Code Rating G 0.25 W K 0.5 W M 1W P 2W Q 3W Resistance Tolerance Code Tolerance ±1 % F Resistance Value Shown by 3 digits or letters.Decimal point is expressed by M as 2M0=2m Ω 10M=10m Ω Code U Packaging Methods Packaging Embossed Carrier Taping 4 mm pitch, 3,000 pcs. Embossed Carrier Taping 4 mm pitch, 2,000 pcs. Part No. ERJMP2 ERJMP3 ERJMP4 Ratings Part No. (inch size) ERJMP2G (1206) ERJMP2K (1206) ERJMP2M (1206) ERJMP3K (2010) ERJMP3M (2010) ERJMP3P (2010) ERJMP4M (2512) ERJMP4P (2512) ERJMP4Q (2512) Power Rating at 70 °C (W) 0.25 0.5 1 0.5 1 2 1 2 3 Resistance Range✽1 (mΩ) Resistance Tolerance (%) T.C.R. (×10–6/°C) Category Temperature Range (°C) 1, 2, 3, 5, 10, 15 F : ±1 ±75 –65 to +170 1, 2, 3, 5, 10, 15 F : ±1 ±75 –65 to +170 1, 2, 3, 5, 10, 15 F : ±1 ±75 –65 to +170 ✽1 Please contact us when resistors of irregular series are needed. 120 Rated Power (%) Power Derating Curve If the ambient temperature of the resistor is more than ambient temperature upper limit value of the rated table, please reduce the rated power according to the Power Derating Curve shown in the figure on the right. 100 −65 °C 70 °C 80 60 40 20 0 –80 170 °C –40 0 40 80 120 160 200 Ambient Temperature (°C) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2017 Current Sensing Resistors, Metal Plate Type Construction Insulator Resistive Element (Metal Plate) Surfase Treatment (Ni/Sn) Protective Resin Electrode (Metal) Dimensions in mm (not to scale), Recommended Land Pattern t W b A c L a Land Pattern Part No. (inch size) ERJMP2 (1206) ERJMP3 (2010) ERJMP4 (2512) Rating Code Resistance Value (mΩ) G, K, M K, M, P M, P, Q M, P Q 1 2 3, 5 10, 15 1 2, 3, 5 10, 15 1 2, 3 5 Dimension (mm) L W A Recommended Land Pattern (mm) Mass (Weight) (g/1000 pcs.) a b c t 1.04±0.25 1.00±0.25 3.20±0.25 1.60±0.25 0.64±0.25 0.50±0.25 5.00±0.25 2.50±0.25 1.47±0.25 0.50±0.25 2.20±0.25 6.40±0.25 3.20±0.25 1.20±0.25 0.64±0.25 0.90±0.25 0.64±0.25 1.8 1.0 1.1 1.8 1.8 2.1 3.1 1.9 1.3 3.1 3.5 3.0 3.4 2.0 30 70 0.90±0.25 0.74±0.25 0.64±0.25 0.76±0.25 0.83±0.25 10, 15 1.5 100 2.0 3.4 4.0 Change of Resistance (%) Typical Temperature dependence of electrical resistance 1 0.5 0 –0.5 –1 –80 –60 –40 –20 0 20 40 60 80 100 120 140 160 180 Temperature (°C) Long-term stability ● Load ● Thermal Life 70 °C, Rated power ERJMP2MF5M0U Shock −55 °C/155 °C ERJMP4QF5M0U ERJMP2MF5M0U 1 0.5 0 –0.5 –1 0 1000 2000 3000 Test Time (hrs) ERJMP4QF5M0U ERJMP3PF5M0U Change of Resistance (%) Change of Resistance (%) ERJMP3PF5M0U 4000 1 0.5 0 –0.5 –1 0 1000 2000 3000 Test Time (hrs) 4000 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2017 Current Sensing Resistors, Metal Plate Type Maximum pulse energy respectively pulse power for continuous operation Referance Data Condition : Room Temperature, OFF : 10 s, 1000 cycle, Wave form : Square Change of Resistance=±1 % type 1000 100 100 10 10 1 ERJMP2 1m Ω ERJMP2 5m Ω ERJMP2 10m Ω 0.1 1 0.1 0.01 0.01 0.001 0.001 0.0001 ● ERJMP3 0.001 0.01 Pulse width (s) 0.1 1 Power (W) Pulse Energy (J) ● ERJMP2 0.0001 10 type 1000 100 100 10 1 ERJMP3 5m Ω ERJMP3 10m Ω 0.1 1 0.1 0.01 0.01 0.001 0.001 0.0001 ● ERJMP4 0.001 0.01 Pulse width (s) 0.1 1 Power (W) Pulse Energy (J) ERJMP3 1m Ω 10 0.0001 10 type 1000 100 100 10 ERJMP4 5m Ω 1 ERJMP4 10m Ω 0.1 1 0.1 0.01 0.01 0.001 0.001 0.0001 0.001 0.01 Pulse width (s) 0.1 1 Power (W) Pulse Energy (J) ERJMP4 1m Ω 10 0.0001 10 This pulse data is reference characteristic data measured under Panasonic test method and it does not guarantee the performance / characteristics of this product. (The performance / characteristics will change due to the test board, land pattern, amount and type of solder, influence of test equipment and surrounding parts, etc.) Therefore, please use it after sufficiently confirming its reliability under your using conditions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2017 Current Sensing Resistors, Metal Plate Type Performance (AEC-Q200) Test Item Thermal Shock Test Condition −55 °C/155 °C, 1000cycles Overload 3 × Rated Power, 5 sec Solderability 245 °C, 3 sec Resistance to Solvents MIL-STD-202 method 215, 2.1a, 2.1d Low Temperature Storage and Operation −65 °C, 24 h Specification Typical value ±1 % 0.20 % ±0.5 % 0.10 % > 95% coverage > 95% coverage No damage No damage ±0.5 % 0.03 % Resistance to Soldering Heat MIL-STD-202 method 210 (260 °C, 10s) ±0.5 % 0.10 % Moisture Resistance MIL-STD-202 method 106 ±0.5 % 0.10 % Shock MIL-STD-202 method 213-A ±0.5 % 0.10 % Vibration, High Frequency 10 to 2000 (Hz) ±0.5 % 0.05 % Life 70 °C, Rated Power, 2000 h ±1 % 0.30 % Storage Life at Elevated Temperature 170 °C, 2000 h ±1 % 0.30 % High Temperature Characteristics 140 °C, 2000 h ±0.5 % 0.05 % Frequency Characteristics Inductance < 5 nH < 2 nH Sense terminal-Layout Land Sense terminal Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2017