Light Touch Switches/EVQP2/P9/3P2
4.7 mm×3.5 mm SMD Light Touch Switches
Type:
EVQP2/EVQP9/EVQ3P2
■ Features
● External dimensions : 4.7 mm×3.5 mm,
Height : Middle Push Travel 2.5 mm
Short Push Travel 2.1 mm, 2.5 mm
● High operating force and long operational life
● High mountability with J-bent (4 terminals)
■ Recommended Applications
● Operation switches for portable electronic equipment
(Mobile phones, Digital still cameras, Camcorders,
Portable audio players, etc.)
● Keyless entry systems (automotive)
● Car audio equipment
■ Explanation of Part Numbers
1
2
3
Product Code
4
5
6
Type Operating Force
7
8
9
Product Height and Push Plate Color
■ Specifications
Travel Type
Middle Push Travel
Type
Short Push Travel
Snap action / Push-on V DC type SPST
Rating
10 μA 2 V DC to 20 mA 15 V DC (Resistive load)
Contact Resistance
Electrical
100 mΩ max.
Insulation Resistance
100 MΩ min. (at 100 V DC)
Dielectric Withstanding Voltage
250 V AC (1 minute)
Bouncing
Mechanical
Endurance
10 ms max. (ON, OFF)
Operating Force
2.5 N, 3.5 N, 5.0 N
1.0 N, 1.6 N, 2.4 N, 3.5 N, 4.0 N, 5.0 N
Travel
0.70 mm±0.20 mm
0.25 mm –0.15 mm
Operating Life
+0.05
2.5 N:1,000,000 cycles min.
3.5 N: 500,000 cycles min.
5.0 N: 200,000 cycles min.
Operating Temperature
1.0 N, 1.6
2.4
3.5
4.0
5.0
N: 1,000,000
N: 500,000
N: 200,000
N: 200,000
N: 200,000
cycles
cycles
cycles
cycles
cycles
min.
min.
min.
min.
min.
–40 °C to +85 °C
–40 °C to +85 °C (Bulk)
–20 °C to +60 °C (Taping)
Storage Temperature
Minimum Quantity/Packing Unit
4,000 pcs. Embossed Taping (Reel Pack)
Quantity/Carton
20,000 pcs.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
LQGXVWULDOSDQDVRQLFFRPDFH
1
© Panasonic Corporation 2019
ANCTB19E 201903-Fd
Light Touch Switches/EVQP2/P9/3P2
■ Dimensions in mm (not to scale)
No. 1
EVQP2
EVQ3P2
Middle push travel
With J-bent terminals
Without
Ground Terminal
(General dimension tolerance±0.2)
2.5
+0.2
–0.1
0.6
+0
5.5 –0.3
4.7±0.1
φ1
.8
1.65±0.1
3.5±0.1
Circuit diagram
1.7±0.1
6.6±0.1
3.7±0.1
0.6±0.1
0.7±0.1
2.7±0.1
PWB land pattern for reference
Part Numbers
Ground Terminal Operating Force
Height
Push Plate Color
Operating Life
EVQP2H02B
Without
2.5 N
2.5 mm
Blue
1,000,000 cycles
EVQP2K02Q
Without
3.5 N
2.5 mm
Gray
500,000 cycles
EVQ3P202K
Without
5.0 N
2.5 mm
Black
200,000 cycles
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
2
© Panasonic Corporation 2019
ANCTB19E 201903-Fd
Light Touch Switches/EVQP2/P9/3P2
■ Dimensions in mm (not to scale)
No. 2
EVQP2
EVQ3P2
(General dimension tolerance : ± 0.2)
0.55
Middle push travel
With J-bent terminals
With
Ground Terminal
Ground terminal
2.5
+0.2
–0.1
0.6
+0
4.7±0.1
5.5 –0.3
φ1
.8
1.65±0.1
Circuit diagram
1.4±0.1
3.5±0.1
1.7±0.1
0.6±0.1
3.7±0.1
1
6.6±0.1
1.7±0.1
2.35±0.1
GND
0.3
0.7±0.1
2.7±0.1
Land pattern plan
We recommend to connect the GND land
shown in the switch spec. with the GND
of your P.C.B for withstanding
electric-static discharge.
Part Numbers
Ground Terminal Operating Force
Height
Push Plate Color
Operating Life
EVQP2B02B
With
2.5 N
2.5 mm
Blue
1,000,000 cycles
EVQP2D02Q
With
3.5 N
2.5 mm
Gray
500,000 cycles
EVQP2F02K
With
5.0 N
2.5 mm
Black
200,000 cycles
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
3
© Panasonic Corporation 2019
ANCTB19E 201903-Fd
Light Touch Switches/EVQP2/P9/3P2
■ Dimensions in mm (not to scale)
No. 3
EVQP2
EVQP9
(General dimension tolerance±0.2)
1.6
Short push travel
With J-bent terminals
Without
Ground Terminal
H
0.6
+0
5.5 –0.3
2.6
4.7±0.1
φ2
Circuit diagram
1.65±0.1
3.5±0.1
1.6
6.6±0.1
3.7±0.1
0.6±0.1
0.55
1.7±0.1
Ground terminal
0.7±0.1
2.7±0.1
PWB land pattern for reference
Part Numbers
Ground Terminal Operating Force
H=Height
Push Plate Color
Operating Life
EVQP2002M
Without
1.0 N
2.1 mm
White
1,000,000 cycles
EVQP2002W
Without
1.0 N
2.5 mm
White
1,000,000 cycles
EVQP2202M
Without
1.6 N
2.1 mm
White
1,000,000 cycles
EVQP2202W
Without
1.6 N
2.5 mm
White
1,000,000 cycles
EVQP2402M
Without
2.4 N
2.1 mm
White
500,000 cycles
EVQP2402W
Without
2.4 N
2.5 mm
White
500,000 cycles
EVQP2602M
Without
3.5 N
2.1 mm
White
200,000 cycles
EVQP2602W
Without
3.5 N
2.5 mm
White
200,000 cycles
EVQP9W02M
Without
4.0 N
2.1 mm
White
200,000 cycles
EVQP9W02W
Without
4.0 N
2.5 mm
White
200,000 cycles
EVQP9P02M
Without
5.0 N
2.1 mm
White
200,000 cycles
EVQP9P02W
Without
5.0 N
2.5 mm
White
200,000 cycles
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
4
© Panasonic Corporation 2019
ANCTB19E 201903-Fd
Light Touch Switches/EVQP2/P9/3P2
■ Dimensions in mm (not to scale)
No. 4
Short push travel
With J-bent terminals
With
Ground Terminal
(General dimension tolerance±0.2)
0.55
EVQP2
EVQP9
1.6
Ground terminal
H
0.6
+0
5.5 –0.3
2.6
4.7±0.1
φ2
Circuit diagram
1.4±0.1
1.65±0.1
3.5±0.1
1.7±0.1
0.6±0.1
3.7±0.1
1
6.6±0.1
1.7±0.1
2.35±0.1
GND
0.3
0.7±0.1
2.7±0.1
Land pattern plan
We recommend to connect the GND land
shown in the switch spec. with the GND
of your P.C.B for withstanding
electric-static discharge.
Part Numbers
Ground Terminal Operating Force
H=Height
Push Plate Color
Operating Life
EVQP2P02M
With
1.0 N
2.1 mm
White
1,000,000 cycles
EVQP2P02W
With
1.0 N
2.5 mm
White
1,000,000 cycles
EVQP2R02M
With
1.6 N
2.1 mm
White
1,000,000 cycles
EVQP2R02W
With
1.6 N
2.5 mm
White
1,000,000 cycles
EVQP2T02M
With
2.4 N
2.1 mm
White
500,000 cycles
EVQP2T02W
With
2.4 N
2.5 mm
White
500,000 cycles
EVQP2V02M
With
3.5 N
2.1 mm
White
200,000 cycles
EVQP2V02W
With
3.5 N
2.5 mm
White
200,000 cycles
EVQP9102M
With
4.0 N
2.1 mm
White
200,000 cycles
EVQP9102W
With
4.0 N
2.5 mm
White
200,000 cycles
EVQP9H02M
With
5.0 N
2.1 mm
White
200,000 cycles
EVQP9H02W
With
5.0 N
2.5 mm
White
200,000 cycles
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
5
© Panasonic Corporation 2019
ANCTB19E 201903-Fd
Light Touch Switches/EVQP2/P9/3P2
■ Recommended Reflow Soldering Conditions
Fan or Normal Temp.
Tape width=12.0 mm
230
180
t1
Feeding hole
φD0
Chip pocket
P2 P0
E
150
F
W
A
B
Operation Top (°C)
MAX.
260
● Embossed Carrier Taping
(Normal Temp.)
t2
90±30
P1
Chip component
Tape running direction
40±10
Taping condition : Lack of products in the middle of taping should be
one MAX, but total quantity specified in the
specifications should be secured.
Peeling off strength of top tape : It should be within 0.2N to 1. ON at
165 degree in peeling off angle.
Joint of carrier tape : One joint per one reel may exist.
Soldering Time (s)
Unit: mm
Part No.
Height
A
B
W
EVQP2
EVQP9
EVQ3P2
2.1
2.5
6.0±0.2
4.7±0.2
12.0±0.3
F
E
5.5±0.1 1.75±0.10 8.0±0.1
■ Recommended Shape of Test Pole
Middle Push
Travel Type
P1
P2
P0
D 0 Dia
2.0±0.1
4.0±0.1
1.5 –0
t2
0.3±0.1
2.7±0.2
■ Recommended Operating Conditions
Short Push
Travel Type
0.3 mm max.
Test pole
φ3.0
+0.1
t1
φ3.3 toφ3.7
Leaning angle range
90 ˚±4 ˚
(vertical direction)
Switch
Mounting surface
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
6
© Panasonic Corporation 2019
ANCTB19E 201903-Fd
Requests to customers
Please refer to "the latest product specifications" when designing your product.
Requests to customers :
https://industrial.panasonic.com/ac/e/salespolicies/
Safety Precautions
When using our products, no matter what sort of equipment they might be used for, be sure to
confirm the applications and environmental conditions with our specifications in advance.
Please contact ..........
Electromechanical Control Business Division
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan
industrial.panasonic.com/ac/e/
©Panasonic Corporation 2019
ANCTB19E-2 201903-Fd
Specifications are subject to change without notice.