EZP-E80156MTA

Plastic Film Capacitors Metallized Polypropylene Film Capacitor EZPE series Features ● High safety, Self-healing and Self-protecting function built-in ● Long product life, High reliability ● Low loss, Low ESR ● Flame retardant (Case and sealing resin) ● RoHS compliant Recommended applications For DC filtering, DC link circuit ● Solar inverters ● Wind power generation ● Industrial power supplies ● Inverter circuit in appliances (Air Conditioners etc.) Construction ● Dielectric ● Electrodes ● Plastic case ● Sealing ● Terminals ：Polypropylene film ：Metallized dielectric with segmented pattern ：UL94 V-0 ：UL94 V-0 ：Tinned wires, 2-pin and 4-pin versions Explanation of part number 1 2 3 4 E Z P E Product code 5 Dielectric & construction 6 Rated voltage Code 50 80 1B 1D R.voltage [DC] 500 V 800 V 1100 V 1300 V 7 8 9 Capacitance 10 Pin type Code L M 11 12 T A Case type Suffix Pin type 2 pin type 4 pin type Specifications Category temperature range*1 −40 ℃ to +85 ℃ 500 V, 800 V, 1100 V, 1300 V *2 Rated voltag [DC] Rated capacitance Capacitance tolerance Withstand voltage Insulation resistanc (IR) 500 V 800 V 1100 V 1300 V (Derating of rated voltage by more than 70 ℃*3) 10 μF to 110 μF 10 μF to 60 μF 10 μF to 40 μF 10 μF to 25 μF ±10 % Between terminals：Rated voltage (V) × 150 ％ 10 s Terminal to case：2110 V [AC] (50 Hz or 60 Hz), 10 s 　CR ≧ 10,000 Ω・F　(20 ℃, 500 V [DC], 60 s) *1 ：The temperature of capacitor surface (case) *2 ：Use for DC voltage only *3 ：Refer to the page of “DC voltage derating” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Dec-15 EZPE series Marking P1±1 4.0±0.5 H±0.5 MArking 4.0±2.0 H±0.5 Dimensions P2±1 P1±1 ø±0.2 Marking(ex.) Panasonic W±0.5 W±0.5 ø±0.2 DC (a) V (b) μF (a) Rated voltage (b) Capacitance (c) Lot No. (c) L±0.5 L±0.5 Unit:ｍｍ Rating · Dimensions · Quantity ■ Rated voltage [DC]：500 V at 70 ℃ (450 V at 85 ℃) Part No. Capacitance (μF) Dimensions (mm) Permissible current W H L P1 P2 ø dv/dt [V/μs] Peak current*1 (Ao-p) RMS *2 current (A rms) ESR*3 (mΩ) tan δ*4 (%) Mass (g) EZPE50106LTA 10 20 42 41.5 37.5 – 1.2 21 210 5.0 22.0 0.28 45 EZPE50156LTA 15 20 42 41.5 37.5 – 1.2 21 315 7.5 14.8 0.28 45 EZPE50206LTA 20 20 42 41.5 37.5 – 1.2 21 420 9.5 11.0 0.28 44 EZPE50256LTA 25 20 42 41.5 37.5 – 1.2 21 525 11.0 8.8 0.28 43 EZPE50306MTA 30 20 42 41.5 37.5 10.2 1.2 21 630 12.5 7.0 0.28 43 EZPE50356MTA 35 30 51 41.5 37.5 10.2 1.2 21 735 13.5 6.2 0.28 83 EZPE50406MTA 40 30 51 41.5 37.5 10.2 1.2 21 840 14.5 5.4 0.28 82 EZPE50456MTA 45 30 51 41.5 37.5 10.2 1.2 21 945 15.2 4.9 0.28 81 EZPE50506MTA 50 30 51 41.5 37.5 20.3 1.2 21 1050 16.0 4.4 0.28 80 EZPE50556MTA 55 30 51 41.5 37.5 20.3 1.2 21 1155 16.3 4.1 0.28 79 EZPE50606MTA 60 30 51 41.5 37.5 20.3 1.2 21 1260 16.5 3.9 0.28 77 EZPE50656MTA 65 30 51 57.5 52.5 10.2 1.2 14 910 15.0 6.8 0.44 111 EZPE50706MTA 70 30 51 57.5 52.5 10.2 1.2 14 980 15.5 6.5 0.44 109 EZPE50756MTA 75 30 51 57.5 52.5 20.3 1.2 14 1050 16.0 6.0 0.44 108 EZPE50806MTA 80 30 51 57.5 52.5 20.3 1.2 14 1120 16.5 5.7 0.44 106 EZPE50856MTA 85 35 56 57.5 52.5 20.3 1.2 14 1190 16.7 5.4 0.44 142 EZPE50906MTA 90 35 56 57.5 52.5 20.3 1.2 14 1260 17.0 5.1 0.44 141 EZPE50956MTA 95 35 56 57.5 52.5 20.3 1.2 14 1330 17.5 4.9 0.44 140 EZPE50107MTA 100 35 56 57.5 52.5 20.3 1.2 14 1400 18.0 4.7 0.44 139 EZPE50117MTA 110 35 56 57.5 52.5 20.3 1.2 14 1540 18.5 4.4 0.44 138 Min. order Q'ty*5 (PCS) 600 400 200 *1：When rising temperature of capacitor surface by continuous peak current (included pulse current), 　use within limit specified for temperature of capacitor surface and self heating temperature rise. *2：Maximum RMS current @70 ℃, 10 kHz Use within limit for self heating temperature rise at capacitor surface. *3：Typical values @ 20 ℃, 10 kHz ESR : less than 2.5×ESR typ *4：Maximum dissipation factor @ 20 ℃, 1 kHz *5：Minimum order quantity consists of 4 packing units. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Dec-15 EZPE series Rating · Dimensions · Quantity ■ Rated voltage [DC]：800 V at 70 ℃ (700 V at 85 ℃) Dimensions (mm) Permissible current Capacitance (μF) W H L P1 P2 ø dv/dt [V/μs] EZPE80106LTA 10 20 42 41.5 37.5 – 1.2 22 220 EZPE80156MTA 15 20 42 41.5 37.5 10.2 1.2 22 EZPE80206MTA 20 30 51 41.5 37.5 10.2 1.2 EZPE80256MTA 25 30 51 41.5 37.5 10.2 EZPE80306MTA 30 30 51 41.5 37.5 20.3 EZPE80356MTA 35 30 51 57.5 52.5 EZPE80406MTA 40 30 51 57.5 52.5 EZPE80456MTA 45 30 51 57.5 52.5 EZPE80506MTA 50 35 56 57.5 52.5 EZPE80556MTA 55 35 56 57.5 52.5 EZPE80606MTA 60 35 56 57.5 52.5 Part No. ESR*3 (mΩ) tan δ*4 (%) 7 15.8 0.22 44 330 9 10.5 0.22 43 22 440 11 7.7 0.22 82 1.2 22 550 13 6.8 0.22 80 1.2 22 660 15 5.3 0.22 78 10.2 1.2 15 525 12 9.7 0.33 110 20.3 1.2 15 600 13 8.3 0.33 107 20.3 1.2 15 675 14 7.0 0.33 104 20.3 1.2 15 750 15 6.3 0.33 140 20.3 1.2 15 825 16 5.9 0.33 138 20.3 1.2 15 900 17 5.6 0.33 136 ESR*3 (mΩ) tan δ*4 (%) Peak current (Ao-p) *1 RMS current*2 (A rms) Mass (g) Min. order Q'ty*5 (PCS) 600 400 200 ■ Rated voltage [DC]：1100 V at 70 ℃ (920 V at 85 ℃) Dimensions (mm) Permissible current Capacitance (μF) W H L P1 P2 ø dv/dt [V/μs] EZPE1B106MTA 10 20 42 41.5 37.5 10.2 1.2 54 540 7.0 12.3 0.20 43 EZPE1B156MTA 15 30 51 41.5 37.5 10.2 1.2 54 810 8.5 8.2 0.20 80 EZPE1B206MTA 20 30 51 41.5 37.5 20.3 1.2 54 1080 10.0 6.3 0.20 76 EZPE1B256MTA 25 30 51 57.5 52.5 10.2 1.2 35 875 8.0 10.7 0.28 107 EZPE1B306MTA 30 30 51 57.5 52.5 20.3 1.2 35 1050 9.0 8.5 0.28 103 EZPE1B356MTA 35 35 56 57.5 52.5 20.3 1.2 35 1225 10.0 7.2 0.28 137 EZPE1B406MTA 40 35 56 57.5 52.5 20.3 1.2 35 1400 11.0 6.5 0.28 134 ESR*3 (mΩ) tan δ*4 (%) Part No. Peak current*1 (Ao-p) RMS *2 current (A rms) Mass (g) Min. order Q'ty*5 (PCS) 600 400 200 ■ Rated voltage [DC]：1300 V at 70 ℃ (1100 V at 85 ℃) Dimensions (mm) Permissible current Capacitance (μF) W H L P1 P2 ø dv/dt [V/μs] EZPE1D106MTA 10 30 51 41.5 37.5 10.2 1.2 73 EZPE1D156MTA 15 30 51 57.5 52.5 10.2 1.2 EZPE1D206MTA 20 30 51 57.5 52.5 20.3 1.2 EZPE1D256MTA 25 35 56 57.5 52.5 20.3 1.2 Part No. Peak current (Ao-p) *1 RMS current*2 (A rms) Mass (g) 730 12.0 10.0 0.17 80 50 750 10.0 14.5 0.22 109 50 1000 14.0 11.1 0.22 103 50 1250 17.0 8.5 0.22 136 Min. order Q'ty*5 (PCS) 400 200 *1：When rising temperature of capacitor surface by continuous peak current (included pulse current), 　 use within limit specified for temperature of capacitor surface and self heating temperature rise. *2：Maximum RMS current @70 ℃, 10 kHz Use within limit for self heating temperature rise at capacitor surface. *3：Typical values @ 20 ℃, 10 kHz ESR : less than 2.5×ESR typ *4：Maximum dissipation factor @ 20 ℃, 1 kHz *5：Minimum order quantity consists of 4 packing units. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Dec-15 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. ■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 16-Apr-21 Plastic Film Capacitors PRECAUTION AND WARNING ● Please consult us in case that demand the specification of our company without fail and do the confirmation of the use condition and that exceeds the entry value and be indistinct when you use it. ● The film capacitors contain a film based dielectric which may be flammable under certain operating conditions. When in use, they can either emit smoke and/or ignite should the product be defective. It is recommended covering the surrounding resin with flame-resistant materials or case as needed particularly. ● In the event of troubles of other parts on the circuit such as shortening and opening, provide with proper means for preventing excessive voltage, current or temperature exceeding the rating from being applied to the film capacitor. ● Prior to use, please make sure that failure of the film capacitors does not have any negative effects on other preventing electronic circuit components and devices that would possibly cause damage. Proper safety measures should be taken using fail-safe protective circuit designs to help prevent other devices of becoming unsafe. Example: a . State in which basic performance of automobiles (run, turn and stop) b . False operations c . Smoke emission/ignitions ● The Film Capacitor listed in this catalog(except for automotive series) are designed and manufactured specifically for general electronic devices, including audio-video equipment, home appliance, office equipment and data communication equipment etc.. Accordingly, it is strongly recommended that the user contact us in advance it the parts are to be used for the following devices(items 1 -12), which require having advanced security measures. The capacitor for automotive can be used for automobiles such as xEV. (1) Transport equipment (motor vehicles, airplanes, trains, ships, traffic signal controllers) (2) Medical equipment (life-support equipment, pacemakers for the heart, dialysis controllers) (3) Aircraft equipment, Aerospace Equipment (airplanes, artificial satellites, rockets, etc.) (4) Submarine equipment (submarine repeating equipment, etc.) (5) Generation control equipment (equipment for atomic/hydraulic/heat power plants) (6) Information processing equipment (large scale computer system) (7) Electric heating appliance, Burning apparatus (8) Rotary motion equipment (9) Security systems (10) Robots (11) Lighting equipment (12) And any similar types of equipment ● If used in a specific appliance that requires an extremely high reliability directly relating with any life-supporting equipment like electronic aviation controllers, automotive driving controllers and engine controllers, please consult us and use within the conditions designated in the specification. However the chip type capacitor should not be used in these appliances. Note: 1. Technical information in this catalog is intended to convey examples of typical performances and/or applications, and is not intended to convey patents rights, if any. 2. For the products, which are controlled items subject to the Foreign Exchange and Foreign Trade Control Law, the export permission according to the Law is necessary. 3. Note of ozone depleting substances of class1 (ODS) under the Montreal Protocol is used in manufacturing process of Device Solutions Business Division, Panasonic Industry Co., Ltd. ■ AEC-Q200 compliant The products are tested based on all or part of the test conditions and methods defined in AEC-Q200. Please consult with Panasonic for the details of the product specification and specific evaluation test results, etc., and please review and approve Panasonic's product specification before ordering. ✽ Intellectual property right We, Panasonic Group are providing the product and service that customers can use without anxiety, working positively on the protection of our products under intellectual property rights. Representative patents relating to xEV Film capacitors are as follows : US Paten No.7027286, No.8315031, No.8861177, No.9240279, No.10475585 JP Patent No.4784464, No.4930099, No.4946618, No.5391797 15-Dec-20