JSM1A-9V-4

Automotive Ultra-Miniature Power Relay 22 .866 JS-M RELAYS FEATURES 16 .630 • Low pick-up voltage for high ambient use • Sealed construction • Ultra-miniature size with universal footprint • Usable at high temperature: 85°C 185°F 16.4 .646 mm inch SPECIFICATIONS Characteristics Contact Arrangement Contact material Initial contact resistance, max.* (By voltage drop 6 V DC 1 A) Initial voltage drop Nominal switching capacity Max. switching power Rating Max. switching voltage Max. switching current Max. operating speed (at rated load) Initial insulation resistance*1 High capacity Standard type type 1 Form A, 1 Form C Silver alloy 200 mΩ Between open Initial contacts breakdown Between 2 voltage* contacts and coil Operate time*3 (at nominal voltage) Release time (without diode)*3 (at nominal voltage) Functional*4 Shock resistance Destructive*5 100 mΩ Max. 0.2 V (at 10 A 12 V DC) 10 A 16 V DC 15 A 16 V DC (resistive) (resistive) 160 W 16 V DC 15 A 10 A (10 A max. at 85°C) Mechanical life Expected (at 180 cpm) life (min. ope.) Electrical Resistive 10 N.O.: 105 N.C.: 5×104 105 Coil 640 mW Contact rating Load Max. carry current Max. make current Max. break current Standard type Form C Form A N.O. N.C. 15 A 15 A 15 A 25 A 25 A 10 A 10 A 10 A 10 A Destructive Conditions for operation, transport and storage*7 (Not freezing and condensing at low temperature) Unit weight * Measured after operating 5 times at the rated load Nominal operating power Functional*6 Vibration resistance 7 High capacity type Form C Form A N.O. N.C. 15 A 15 A 15 A 50 A 50 A 15 A 15 A 15 A 15 A 15 cps. Min. 100 MΩ (at 500 V DC) 750 Vrms for 1 min. 1,500 Vrms for 1 min. Approx. 10 ms Approx. 10 ms Min. 98 m/s2 {10 G} Min. 980 m/s2 {100 G} Approx. 98 m/s2 {10 G}, 10 to 55 Hz at double amplitude of 1.6 mm Approx. 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm Ambient temp. –40°C to +85°C –40°F to +185°F Humidity 5 to 85% R.H. Approx. 12 g .423 oz Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Intial breakdown voltage"section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61) TYPICAL APPLICATIONS • Automotive: Power-window, car antenna, door lock, intermittent wiper, interior lighting, power seat, power sunroof, car stereo power antenna, etc. ORDERING INFORMATION Ex. JSM 1a F 4 Contact arrangement Protective construction Coil voltage (DC) Contact material 1a: 1 Form A 1: 1 Form C Nil: Sealed construction F: Flux-resistant type 9, 12 V 4: Standard type (10 A) 5: High capacity type (15 A) Note: Standard packing: Carton: 100 pcs. Case: 500 pcs. 360 12V JS-M TYPES AND COIL DATA (at 20°C 68°F) Standard type (10 A) Contact Coil arrange- voltage, ment V DC 1 Form A 1 Form C 9 12 9 12 Max. Nominal Nominal allowable Pick-up Drop-out Coil operating operating voltage, voltage, voltage, resistance current, Ω power, V DC V DC V DC mA (±10%) mW (at 80°C (max.) (min.) (±10%) 176°F ) 4.7 0.7 126 71.4 640 12 6.3 0.9 225 53.3 640 16 4.7 0.7 126 71.4 640 12 6.3 0.9 225 53.3 640 16 High capacity type (15 A) Sealed type Flux-resistant type Sealed type Flux-resistant type Nominal voltage, V DC JSM1a-9V-4 JSM1a-12V-4 JSM1-9V-4 JSM1-12V-4 JSM1aF-9V-4 JSM1aF-12V-4 JSM1F-9V-4 JSM1F-12V-4 JSM1a-9V-5 JSM1a-12V-5 JSM1-9V-5 JSM1-12V-5 JSM1aF-9V-5 JSM1aF-12V-5 JSM1F-9V-5 JSM1F-12V-5 9 12 9 12 mm inch DIMENSIONS Schematic (Bottom view) PC board pattern (Copper-side view) 1a 1a 16 .630 0.4 .016 4-1.3 dia. 4-.051 dia. N.O. 3.9 .154 COM COIL 12 .472 0.24 .009 0.8 .031 0.8 .031 2 .079 0.4 .016 2 16 .630 1.2 .047 2.3 .091 Note: Terminal No. 4 is only for 1 Form C type 1c 1c 5-1.3 dia. 5-.051 dia. 3 N.O. 12 .472 1 4 N.C. 5 N.O. COM COIL 0.4 .016 2 .079 12.2 .480 12 .472 N.C. 12.2 .480 22 .866 2 .079 General tolerance: ±0.3 ±.012 12.2 .480 Tolerance: ±0.1 ±.004 REFERENCE DATA Circuit + Detection circuit Contact welding: Min. 0.5 sec. Mis-contacting: After 0.2 sec. 16 V DC 12 V DC Change of pick-up and drop-out voltage Change of contact resistance 6 14 Max. Pick-up voltage 5 x Min. 4 3 Max. x Min. Drop-out voltage 2 Contact resistance, mΩ Tested sample: JSM-12V-4, 3 pcs. Condition: 10 A 16 V DC resistive load, 20 cpm Ambient temperature: 25°C 77°F Pick-up/drop-out voltage, V 1-(1) Electrical life test (Resistive) 10 8 6 Max. x Min. 4 1 – N.O. side 12 2 0 0 10 10 No. of operations, ×104 No. of operations, ×104 1-(2) Electrical life test (Power window motor load) 100 9 90 8 7 6 Pick-up voltage 5 Drop-out voltage 3 2 M~ M 14 V DC Ry2 – Contact welding detection and Mis-contacting detection circuit Max. x Min. 4 + Ry1 Change of contact resistance 10 Max. x Min. 1 0 Contact resistance, mΩ Circuit Change of pick-up and drop-out voltage Pick-up/drop-out voltage, V Tested sample: JSM1-12V-4, 4 pcs. Load: DC 14 V (1) Max. 14.8 A (Inrush) Max. 14.2 A (Break) (2) Max. 20.3 A (Inrush) Max. 20.0 A (Break) (3) Max. 16.2 A (Inrush) Max. 11.6 A (Break) Switching frequency: 3 cycle/min. (ON:OFF = 1:9 s) Ambient temperature: (1) 85°C 185°F; (2) –40°C –40°F; (3) 35°C 95°F Tested cycle: (1) 2 × 104 cycle ➝ (2) 2 x 104 cycle ➝ (3) 11 × 104 cycle (Total 15 × 104 cycles) N.C. side N.O. side 80 70 60 50 40 30 20 x x 10 2 4 15 No. of operations, ×104 0 2 4 15 No. of operations, ×104 361 JS-M 1-(3) Electrical life test (Door lock motor load) + 16 V DC M M M M Contact welding detection and Mis-contacting detection circuit 100 9 90 8 7 6 Pick-up voltage Max. x Min. 5 4 3 Drop-out voltage Max. x Min. 2 – Change of contact resistance 10 Contact resistance, mΩ Circuit Change of pick-up and drop-out voltage Pick-up/drop-out voltage, V Tested sample: JSM1-12V-4, 10 pcs. Load: DC 16 V Max. 17.7 A, Min. 15.2 A Switching frequency: 6 cycles/min. (ON:OFF = 0.5:0.5 s) Ambient temperature: 30°C 86°F Tested cycle: 4 × 104 cycles 80 70 60 50 40 30 20 1 10 0 0 2 No. of operations, ×104 N.C. side N.O. side 4 x x 4 2 No. of operations, ×104 1-(4) Electrical life test Change of pick-up and drop-out voltage 6 M Detection circuit Contact welding: Min. 0.5 s Mis-contacting: After 0.2 s Pick-up/drop-out voltage, V + 16 V DC 12 V DC Max. 14 5 x 12 4 Min. Pick-up voltage Circuit Change of contact resistance 3 Drop-out voltage Max. x Min. 2 Contact resistance, mΩ Tested sample: JSM1-12V-4, 3 pcs. Load: 16 V DC 25 A/5 A motor load Switching frequency: 6 cycles (ON:OFF = 1:9 s) Ambient temperature: 27°C 81°F 1 – Max. N.O. side 10 8 x 6 4 Min. 2 0 0 10 10 No. of operations, ×10 No. of operations, ×104 4 1-(5) Electrical life test Change of pick-up and drop-out voltage Tested sample: JSM1-12V-5, 4 pcs. Load: 16 V DC 15 A (resistive) Switching frequency: 20 cpm Ambient temperature: 25°C 77°F 14 Detection circuit Contact welding: Min. 0.5 sec. Mis-contacting: After 0.2 sec. 5 Pick-up voltage Max. x Min. 4 3 2 Drop-out voltage Max. x Min. Contact resistance, mΩ + Pick-up/drop-out voltage, V Circuit 16 V DC 12 V DC Change of contact resistance 6 1 – N.O. side Max. 12 10 x 8 6 Min. 4 2 0 0 10 No. of operations, ×10 10 No. of operations, ×104 4 1-(6) Electrical life test + 16 V DC 12 V DC – M Detection circuit Contact welding: Min. 0.5 s Mis-contacting: After 0.2 s 14 5 12 Pick-up voltage Max. x Min. 4 3 2 Drop-out voltage Max. x Min. 1 N.O. side 10 Max. 8 x Min. 6 4 2 0 10 No. of operations, ×10 362 Change of contact resistance 6 Contact resistance, mΩ Circuit Change of pick-up and drop-out voltage Pick-up/drop-out voltage, V Tested sample: JSM1-12V-5, 3 pcs. Load: 16 V DC 50 A/10 A motor load Switching frequency: 6 cycles (ON:OFF = 1:9 s) Ambient temperature: 27°C 81°F 4 0 10 No. of operations, ×104 JS-M 1-(7) Electrical life test (Lamp load) Tested sample 14.5V DC DC12V Tested sample: JSM1-12V-4 & -5, 5 pcs. Measured portion: Inside the coil 6 110 Pick-up voltage Max. x Min. 5 4 3 Drop-out voltage Max. x Min. 2 10 A at 25°C 77°F 70 60 10 A at 85°C 185°F 50 40 30 0 10 0 12 15 15 A at 85°C 185°F 80 20 No. of operations, ×104 9/1/2000 90 1 0 15 A at 25°C 77°F 100 Temperature rise, °C Circuit 2. Temperature rise Contact welding: 0 time Miscontact: 0 time Pick-up/drop-out voltage, V Tested sample: JSM1a-12V-5, 4 pcs. Load: 9.6A Steady, Inrush 55.2A, 14.5V DC (Lamp load) Operating frequency: ON 1s, OFF 2s 14 16 Coil applied voltage, V All Rights Reserved, © Copyright Matsushita Electric Works, 363 Ltd.