NR3313TQ

PRELIMINARY DATA SHEET RECEIVER NR3313TQ InGaAs PIN-PD RECEIVER WITH INTERNAL PRE-AMPLIFIER FOR 10 Gb/s APPLICATIONS DESCRIPTION The NR3313TQ products consist of InGaAs PIN ROSAs (Receiver Optical Sub-Assembly) with internal pre-amplifiers designed for 10 Gb/s optical transceivers such as the XFP/SFP+. These modules are ideal as receivers for IEEE 10G BASE and SONET OC-192 systems. FEATURES • XMD-MSA compliant ROSA • 10 Gb/s high sensitivity InGaAs PIN-PD • +3.3 V transimpedance pre-amplifier • Minimum receiver sensitivity • Operating case temperature • Transimpedance • Cut-off frequency • With flexible printed circuit Pr = −20 dBm TC = −20 to +95°C Zt = 6 000 Ω (Single-ended) fc = 8.5 GHz The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PL10775EJ01V0DS (1st edition) Date Published August 2009 NS Printed in Japan 2009 NR3313TQ PACKAGE DIMENSIONS (UNIT: mm) φ 5.0 φ 3.85 φ 2.99±0.01 φ 2.92 offset 0.11 1.1±0.035 0.63 4.05 1.1 MIN. 11.8±0.3 0.55±0.03 OPTICAL REFERENCE PLANE φ 5.6 BOTTOM VIEW 1.00 R0.35 3.0 5.41 Vpd GND DATA N DATA P GND VCC 2.91 2.69 13.42 16.30 0.10 2.00 0.35 2 Preliminary Data Sheet PL10775EJ01V0DS 0.79 5.60 NR3313TQ BLOCK DIAGRAM Vpd 100 pF GND GND PD DATA P TIA DATA N 100 pF GND VCC Preliminary Data Sheet PL10775EJ01V0DS 3 NR3313TQ ORDERING INFORMATION Part Number NR3313TQ Receptacle Type LC, Isolated Note Differential output with flexible PCB ABSOLUTE MAXIMUM RATINGS Parameter PIN-PD Reverse Voltage PIN-PD Reverse Current IC Supply Voltage Operating Case Temperature Storage Temperature Maximum AOP Input (ER < 5.4 dB (1.1 A/W)) Lead Soldering Temperature (Flexible Printed Circuit) Tsld 260 (10 sec.) °C Symbol VR IR VCC TC Tstg Pin Ratings 10 10 −0.3 to +4 −20 to +95 −40 to +85 +5 Unit V mA V °C °C dBm RECOMMENDED OPERATING CONDITION Parameter PIN-PD Reverse Voltage IC Supply Voltage Operating Case Temperature Symbol VR VCC TC MIN. 2.8 +2.97 −20 TYP. 3.3 +3.3 +25 MAX. 3.5 +3.5 +95 Unit V V °C ELECTRO-OPTICAL CHARACTERISTICS (λ = 1 310 nm/1 550 nm, unless otherwise specified) Parameter Sensitivity Transimpedance Symbol S Zt RL = 50 Ω, Pin = −20 dBm, Single-ended Maximum Output Voltage Swing Cut-off Frequency Vclip fC Single-ended RL = 50 Ω, Pin = −17 dBm, −3 dB from 1 GHz Minimum Receiver Sensitivity Overload IC Supply Current Optical Return Loss Pr PO ICC ORL 9.95 Gb/s, BER = 10− , 12 Conditions MIN. 0.75 3 000 TYP. MAX. 1.2 Unit A/W Ω 6 000 10 000 350 6.5 8.5 −20 +1 +3 50 −27 −17 mVpp GHz dBm dBm mA dB PRBS = 2 −1, ER > 10 dB, NRZ, 31 λ = 1 550 nm VCC = 3.5 V 4 Preliminary Data Sheet PL10775EJ01V0DS NR3313TQ REFERENCE Document Name Opto-Electronics Devices Pamphlet *1 Document No. PX10160E *1 Published by the former NEC Compound Semiconductor Devices, Ltd. Preliminary Data Sheet PL10775EJ01V0DS 5 NR3313TQ • T he information in this document is current as of August, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E0904E 6 Preliminary Data Sheet PL10775EJ01V0DS NR3313TQ Caution This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. GaAs Products Caution Optical Fiber A glass-fiber is attached on the product. Handle with care. • When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments.