NX8563LB

DATA SHEET LASER DIODE NX7460LE 1 480 nm EDFA APPLICATION InGaAsP STRAINED MQW DC-PBH LASER DIODE MODULE DESCRIPTION The NX7460LE is a 1 480 nm pumping laser diode module with optical isolator for an EDFA (Er Doped optical Fiber Amplifier) that can expand the transmission span and compensate optical losses. It has a strained Multiple Quantum Well (st-MQW) DC-PBH laser diode that features high output power, high efficiency, and stable fundamental mode. FEATURES • InGaAsP strained MQW DC-PBH laser diode • High output power Pf = 120 mW MIN. @ IF = 550 mA CW • Internal optical isolator, thermoelectric cooler and InGaAs monitor photo diode • Hermetically sealed 14-pin butterfly package • Single mode fiber pigtail • Wide operating temperature range TC = 0 to +65 °C 15.24 2.54 4– φ 2.67 22.3 PACKAGE DIMENSIONS in millimeters #7 Thermistor TOP VIEW #1 Case 8.89±0.13 13.3 –0.0 1.25 4.0±0.15 +1.0 + – #14 7 8 1 14 12.7±0.15 6.0 LD #8 PD 0.5 20.83±0.13 26.04±0.13 Optical Fiber (SMF) Length: 1 m MIN. Pin No. 1 2 3 4 5 6 7 PIN CONNECTIONS Function Cooler Anode Thermistor PD Anode PD Cathode Case Ground NC NC Pin No. Function 8 NC 9 NC 10 LD Anode, Case Ground 11 LD Cathode 12 NC 13 Case Ground 14 Cooler Cathod 0.30 8.2±0.2 5.6 1.0 29.97±0.25 The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P14127EJ2V0DS00 (2nd edition) Date Published September 1999 NS CP(K) Printed in Japan The mark • shows major revised points. 5.15 Cooler 0.9 © 1999 NX7460LE ORDERING INFORMATION Part Number NX7460LE NX7460LE-BA NX7460LE-CA Available Connector Without Connector With FC-PC Connector With SC-PC Connector ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise specified) Parameter Forward Current of LD Reverse Voltage of LD Forward Current of PD Reverse Voltage of PD Operating Case Temperature Storage Temperature Lead Soldering Temperature (10 s) Symbol IF VR IF VR TC Tstg Tsld Ratings 700 2.0 10 20 –20 to +65 –40 to +85 260 Unit mA V mA V °C °C °C ELECTRO-OPTICAL CHARACTERISTICS (TLD = 25 °C, TC = 0 to +65 °C) Parameter Threshold Current Forward Voltage Optical Output Power from Fiber Center Wavelength Spectrum Width Isolation Symbol Ith VF Pf λC σ IS CW IF = 550 mA IF = 550 mA IF = 550 mA, RMS (–20 dB) IF = 550 mA, RMS (–20 dB) 1 470 nm to 1 490 nm 20 120 1 470 Conditions MIN. TYP. 25 2.2 140 1 480 4.0 1 490 8.0 MAX. 35 2.7 Unit mA V mW nm nm dB 2 Data Sheet P14127EJ2V0DS00 NX7460LE ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = 25 °C, TC = 0 to +65 °C) Parameter Monitor Current Monitor Dark Current Tracking Error Symbol Im ID γ*1 Conditions VR = 5 V, IF = 550 mA VR = 5 V Im = const. MIN. 500 TYP. 1 000 2.0 MAX. 1 500 10 0.5 Unit µA nA dB *1 γ = 10 log Pf 120 mW Pf (mW) TLD = TC = 25 ˚C X Pf TLD = 25 ˚C TC = 0 to +65 ˚C 0 Im (@Pf (25 ˚C) = 120 mW) Im ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TLD = 25 °C, TC = 0 to +65 °C) Parameter Thermistor Resistance B Constant Cooler Current Cooler Voltage Cooling Capacity Symbol R B IC VC TLD = 25 °C Conditions MIN. 9.5 3 300 TYP. 10.0 3 400 1.0 3.5 40 MAX. 10.5 3 500 1.25 4.3 Unit kΩ K A V K ∆T = 40 K ∆T = 40 K IC = 1.25 A, IF = 660 mA ∆T*1 *1 ∆T = TC – TLD Data Sheet P14127EJ2V0DS00 3 NX7460LE TYPICAL CHARACTERISTICS (TC = 25 °C) OPTICAL OUTPUT POWER FROM FIBER vs. FORWARD CURRENT Optical Output Powr from Fiber Pf (mW) 150 LONGITUDINAL MODE 100 50 0 300 Forward Current IF (mA) 600 Relative Intensity (10 dB/div.) 1 430 1 480 Wavelength λ (nm) 1 530 Remark The graphs indicate nominal characteristics. 4 Data Sheet P14127EJ2V0DS00 NX7460LE LD FAMILY FOR DENSE WDM APPLICATION Absolute Maximum Ratings Part Number TC (°C) Tstg (°C) Typical Characteristics Ith (mA) TYP. NDL7540PA −20 to +65 −40 to +85 40 Pf (mW) MIN. 90 λC (nm) TYP. 1 480 1 480 nm pump LD module NX7460LE 0 to +65 −40 to +85 25 120 1 480 1 480 nm pump LD module NX8501 Series NX8561JD NX7660JC *1 *1 Description Package BFY BFY 0 to +65 0 to +65 −20 to +65 −20 to +70 −20 to +65 −20 to +65 −40 to +85 −40 to +85 −40 to +85 −40 to +85 −40 to +85 −40 to +85 20 20 15 7 2 3 5 0.5 1 510 1 510 1 625 1 550 *2 Telemetry Telemetry Telemetry 2.5 G EA modulator integrated module 1 550 CW LD module 1 550 CW LD module Coaxial DIP DIP BFY NDL7910P NX8562LB NX8563LB 20 20 20 10 1 550 *2 *3 BFY BFY ITU-T *1 Under development *2 Wavelength selectable for ITU-T standards upon request *3 Wavelength selectable for ITU-T standards Data Sheet P14127EJ2V0DS00 5 NX7460LE REFERENCE Document Name NEC semiconductor device reliability/quality control system Quality grades on NEC semiconductor devices Semiconductor device mounting technology manual SEMICONDUCTOR SELECTION GUIDE Products & Packages (CD-ROM) Document No. C11159E C11531E C10535E X13769X 6 Data Sheet P14127EJ2V0DS00 NX7460LE CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEC Corporation DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM OUTPUT POWER mW MAX WAVELENGTH nm CLASS lllb LASER PRODUCT SEMICONDUCTOR LASER NEC Building, 7-1, Shiba 5-chome, Minato-ku, Tokyo 108-01, Japan Type number: Manufactured: Serial Number: This product conforms to FDA regulations as applicable to standards 21 CFR Chapter 1. Subchapter J. AVOID EXPOSURE-Invisible Laser Radiation is emitted from this aperture Data Sheet P14127EJ2V0DS00 7 NX7460LE The export of this product from Japan is prohibited without governmental license. To export or re-export this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. • The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. • N o part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. • NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. • D escriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. • While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. • NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8