PS2561DL-1Y-V-F3-A

PRELIMINARY DATA SHEET PHOTOCOUPLER PS2561D-1,PS2561DL-1 PS2561DL1-1,PS2561DL2-1 DIP PHOTOCOUPLER OPERATING AMBIENT TEMPERATURE 110°C −NEPOC Series− DESCRIPTION The PS2561D-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2561D-1 is in a plastic DIP (Dual In-line Package) and the PS2561DL-1 is lead bending type (Gull-wing) for surface mount. The PS2561DL1-1 is lead bending type for long creepage distance. The PS2561DL2-1 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES • Operating ambient temperature: 110°C • High Isolation voltage (BV = 5 000 Vr.m.s.) • High collector to emitter voltage (VCEO = 80 V) • High current transfer ratio (CTR = 160% TYP.) • High-speed switching (tr = 3 μs TYP., tf = 5 μs TYP.) • Ordering number of taping product: PS2561DL-1-F3 : 2 000 pcs/reel : PS2561DL2-1-E3: 1 000 pcs/reel • Pb-Free product 1 2 4 PIN CONNECTION (Top View) 3 1. Anode 2. Cathode 3. Emitter 4. Collector APPLICATIONS • Power supply • Telephone/FAX. • FA/OA equipment • Programmable logic controller The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10777EJ01V0DS (1st edition) Date Published August 2009 NS Printed in Japan 2009 PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 PACKAGE DIMENSIONS (UNIT : mm) DIP Type Long Creepage Distance PS2561DL1-1 4.6±0.35 4.6±0.35 PS2561D-1 43 6.5±0.5 6.5±0.5 4 3 12 7.62 1 3.15 3.85 ±0.35 ±0.4 3.5 ±0.3 2 10.16 3.2±0.4 4.15±0.4 3.5±0.3 1.25±0.15 0 to 15° +0.1 0.25 –0.05 0.50±0.10 0.25 M 2.54 0.50±0.1 0.25 M 2.54 1.25±0.15 0.25–0.05 +0.1 0 to 15° Lead Bending Type PS2561DL-1 4.6±0.35 Long Creepage Distance (Gull-Wing) PS2561DL2-1 4.6±0.35 4 6.5±0.5 3 6.5±0.5 4 3 0.25±0.2 1 3.5±0.3 2 0.25 +0.1 –0.05 0.1 +0.1 –0.05 1 3.5±0.3 2 1.25±0.15 0.25 M 2.54 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.9±0.25 +0.2 11.8–0.5 10.16 PHOTOCOUPLER CONSTRUCTION Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Inner Creepage Distance (MIN.) Isolation Distance (MIN.) PS2561D-1, PS2561DL-1 7 mm 7 mm 4 mm 0.4 mm PS2561DL1-1, PS2561DL2-1 8 mm 8 mm 4 mm 0.4 mm 2 Preliminary Data Sheet PN10777EJ01V0DS 0.25–0.05 +0.1 PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 MARKING EXAMPLE No. 1 pin Mark 2561D NY931 Assembly Lot N Y 9 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Pb-Free and Halogen Free New PKG Made in Taiwan Y Preliminary Data Sheet PN10777EJ01V0DS 3 PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS2561D-1 PS2561DL-1 PS2561DL1-1 PS2561DL2-1 PS2561DL-1-F3 PS2561DL2-1-E3 PS2561D-1-V PS2561DL-1-V PS2561DL1-1-V PS2561DL2-1-V PS2561DL-1-V-F3 PS2561DL2-1-V-E3 PS2561D-1Y-A PS2561DL-1Y-A PS2561DL1-1Y-A PS2561DL2-1Y-A PS2561DL-1Y-F3-A PS2561DL2-1Y-E3-A PS2561D-1Y-V-A PS2561DL-1Y-V-A PS2561DL1-1Y-V-A PS2561DL2-1Y-V-A PS2561DL-1Y-V-F3-A PS2561DL2-1Y-V-E3-A Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Special version (Pb-Free and Halogen Free) Magazine case 100 pcs Packing Style Safety Standard Approval Standard products (UL, CSA, BSI, NEMKO, DEMKO, SEMKO, FIMKO Embossed Tape 2 000 pcs/reel awaiting approval) Embossed Tape 1 000 pcs/reel Magazine case 100 pcs DIN EN60747-5-2 (VDE0884 Part2) awaiting approval (Option) Application Part Number PS2561D-1 PS2561DL-1 PS2561DL1-1 PS2561DL2-1 PS2561DL-1 PS2561DL2-1 PS2561D-1 PS2561DL-1 PS2561DL1-1 PS2561DL2-1 PS2561DL-1 PS2561DL2-1 *1 *1 For the application of the Safety Standard, following part number should be used. 4 Preliminary Data Sheet PN10777EJ01V0DS PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Diode Reverse Voltage Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Symbol VR IF Ratings 6 40 1.5 150 1 80 7 50 1.5 150 5 000 –55 to +110 –55 to +150 Unit V mA mW/°C mW A V V mA mW/°C mW Vr.m.s. °C °C ΔPD/°C PD IFP VCEO VECO IC Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation ΔPC/°C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 μs, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. Preliminary Data Sheet PN10777EJ01V0DS 5 PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Collector to Emitter Dark Current Coupled Current Transfer Ratio (IC/IF) *1 Symbol VF IR Ct ICEO IF = 10 mA VR = 5 V Conditions MIN. TYP. 1.2 MAX. 1.4 5 Unit V μA pF V = 0 V, f = 1.0 MHz VCE = 48 V, IF = 0 mA 10 100 nA CTR IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V 50 10 160 80 400 % Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 VCE (sat) IF = 10 mA, IC = 2 mA 0.3 V Ω RI-O CI-O tr tf VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100 Ω 10 11 0.5 3 5 pF μs *2 *1 CTR rank CTR Rank H 16 and larger 100 to 200 Q 20 and larger 130 to 260 W 26 and larger 200 to 400 L 40 and larger 50 to 400 N 10 and larger IF = 1 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V CTR (%) 80 to 160 Conditions IF = 5 mA, VCE = 5 V *2 Test circuit for switching time Pulse Input PW = 100 μ s Duty Cycle = 1/10 IF 50 Ω VOUT RL = 100 Ω VCC Input ton td ts toff 90% Output 10% tr tf 6 Preliminary Data Sheet PN10777EJ01V0DS PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 TAPING SPECIFICATIONS (UNIT : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2561DL-1-F3 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 330±2.0 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange Preliminary Data Sheet PN10777EJ01V0DS 7 PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.55±0.1 4.4±0.2 11.5±0.1 2.05±0.1 12.0±0.1 6.6±0.2 0.38 Tape Direction PS2561DL2-1-E3 Outline and Dimensions (Reel) 12.35±0.15 24.0±0.3 2.0±0.5 φ 330±2.0 2.0±0.5 φ13.0±0.2 R 1.0 φ 21.0±0.8 φ 100±1.0 25.5±1.0 29.5±1.0 Packing: 1 000 pcs/reel 23.9 to 27.4 Outer edge of flange 8 Preliminary Data Sheet PN10777EJ01V0DS PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) D A Part Number PS2561DL PS2561DL2 Lead Bending lead bending type (Gull-wing) for long creepage distance (surface mount) lead bending type (Gull-wing) for surface mount A 8.2 10.2 B 2.54 2.54 B C 1.7 1.7 C D 2.2 2.2 Preliminary Data Sheet PN10777EJ01V0DS 9 PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (°C) (heating) to 10 s 260°C MAX. 220°C to 60 s 180°C 120°C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) • Time (each pins) • Flux 350°C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. 10 Preliminary Data Sheet PN10777EJ01V0DS PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between corrector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Preliminary Data Sheet PN10777EJ01V0DS 11 PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 • T he information in this document is current as of August, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E0904E 12 Preliminary Data Sheet PN10777EJ01V0DS PS2561D-1,PS2561DL-1,PS2561DL1-1,PS2561DL2-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.