PS7241-AT1

8-PIN SOP SOLID STATE RELAY PS7241-AT1 PS7241-AT5 FEATURES • 2 CHANNEL TYPE: OCMOS FET + PHOTOCOUPLER • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE: 8-PIN SOP • ISOLATION VOLTAGE: BV: 1500 Vr.m.s. MIN • LOW OFFSET VOLTAGE • LOW LED OPERATING CURRENT: I F = 2 mA • AVAILABLE IN TAPE AND REEL DESCRIPTION PS7241-AT1 and PS7241-AT5 are solid state relays containing a GaAs LED on the emitting side (input side) and MOSFETs (+ Phototransistor) on the output side. They are suitable for analog signal control because of their low offset and high linearity. APPLICATIONS • EXCHANGE EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER SYMBOLS VF Diode IR ILOFF Cout IFon RON1 Coupler RON2 tON tOFF RI-O CI-O Diode Transistor VF IR ICEO BVCEO BVECO CTR Coupler VCE(sat) RI-O CI-O tR tF Note: 1. PS7241-AT1 only. Turn-on Time Turn-off Time Isolation Resistance Isolation Capacitance Forward Voltage Reverse Current1 Collector to Emitter Dark Current VI-0 = 1.0 kV V = 0 V, f = 1 MHz IF = 10 mA VR = 5 V VCE = 40 V, IF = 0 mA PARAMETERS Forward Voltage Reverse Current Off-state Leakage Current Output Capacitance LED On-state Current On-state Resistance CONDITIONS IF = 5 mA VR = 5 V VD = 400 V VD = 0 V, f = 1 MHz IL = 120 mA IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 120 mA, t≤10 ms IF = 10 mA, VO = 5 V, PW ≥10 ms UNITS V µA µA pF mA Ω Ω ms ms Ω pF V µA nA V V % V Ω pF µs µs 1011 0.4 3.0 5.0 40 6 50 400 0.3 109 1.1 1.2 1.4 5.0 100 0.3 0.04 20 0.03 65 2.0 30 25 1.0 0.2 PS7241-AT1, PS7241-AT5 MIN TYP 1.2 MAX 1.4 5.0 1.0 OCMOS FET Photocoupler MOSFET Collector to Emitter Breakdown Voltage IC = 1 mA Emitter to Collector Breakdown Voltage IE = 100 µA Current Transfer Ratio Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 2 mA Vin-out = 1.0 kVcc V = 0 V, f = 1 MHz Vcc = 5 V, Ic = 2 mA RL = 100 Ω PS7241-AT1, PS7241-AT5 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF VR PARAMETERS Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current2 Break Down Voltage Continuous Load Current Pulse Load Current3 (AC/DC Connection) Power Dissipation Forward Current Reverse Voltage4 Power Dissipation Peak Forward Current2 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Isolation Voltage5 Total Power Dissipation Operating Ambient Temp. Storage Temperature UNITS mA V mW/ch A V mA mA mW mA V mW/ch A V V mA mW Vr.m.s. mW °C °C RATINGS 50 5.0 50 1.0 400 120 250 430 50 5.0 50 1.0 40 6.0 80 100 1500 630 -40 to 80 -40 to 100 RECOMMENDED OPERATING CONDITIONS (TA = 25˚C) SYMBOLS PARAMETERS OCMOS FET IF LED Operating Current VF LED Off Voltage UNITS MIN TYP MAX mA V 2 0 10 20 0.5 OCMOS PD IFP MOSFET VL IL ILP PD Diode IF VR PD IFP Transistor VCEO VECO IC PC BV PT TA TSTG ORDERING INFORMATION PART NUMBER PS7241-AT1 PS7241-AT1-F3 PS7241-AT1-F4 PS7241-AT5 PS7241-AT5-F3 PS7241-AT5-F4 Magazine case 45 pcs Embossed Tape 1500 pcs/reel PACKAGE 8-pin SOP PACKING STYLE Magazine case 45 pcs Embossed Tape 1500 pcs/reel Notes: 1 .Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1%. 3. PW = 100 ms, 1 shot. 4. PS7241-AT1 only. 5. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and ouput. OUTLINE DIMENSIONS (Units in mm) PS7241-AT1 0.4±0.3 9.08±0.5 Photocoupler PS7241-AT5 (TOP VIEW) 8 7 6 5 0.4±0.3 9.08±0.5 8 (TOP VIEW) 7 6 5 1 2 3 4 1 2 3 4 7.0±0.3 7.0±0.3 0.15 -0.05 +0.10 0.15 -0.05 +0.10 4.4 +0.08 4.4 2.05 -0.05 +0.08 +0.08 2.05 -0.05 +0.08 0.5 -0.05 2.54 2.54 2.54 0.4 -0.05 0.5±0.3 +0.10 0.5 -0.05 2.54 2.54 2.54 0.4 -0.05 0.5±0.3 +0.10 1 2 3 4 5 6 7 8 LED Anode LED Cathode Tr Collector Tr Emitter LED Anode LED Cathode MOSFET MOSFET 1 2 3 4 5 6 7 8 LED Anode LED Cathode Tr Collector Tr Emitter LED Anode/Cathode LED Cathode/Anode MOSFET MOSFET PS7241-AT1, PS7241-AT5 OCMOS TYPICAL PERFORMANCE CURVES (TA = 25˚C) MAXIMUM FORWARD CURRENT (DC) vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 0.3 Maximum Forward Current (DC), IF (mA) 100 80 Maximum Load Current, IL (A) 0.2 60 40 0.1 20 0 -20 0 20 40 60 80 100 0 -20 0 20 40 60 80 100 Ambient Temperature, TA (˚C) Ambient Temperature, TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 2.0 200 OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE f = 1 MHz Forward Voltage, VF (mA) 1.5 IF = 30 mA IF = 20 mA IF = 10 mA 1.0 IF = 5 mA Output Capacitance (pF) 150 100 0.5 50 0.0 -40 -20 0 20 40 60 80 100 0 20 40 60 80 100 120 Ambient Temperature, TA (˚C) Supply Voltage VCC (V) OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE 10 -5 LOAD CURRENT vs. LOAD VOLTAGE 150 IF = 10 mA Off-State Leakage Current ILOFF (A) TA = 80 °C 100 Load Current IL (mA) 10 -6 50 10 -7 TA = 25 °C -3.0 -2.0 -1.0 -50 0 1.0 2.0 3.0 10 -8 -100 10 -9 0 100 200 300 400 500 -150 Supply Voltage VCC (V) Load Voltage VL (V) PS7241-AT1, PS7241-AT5 OCMOS TYPICAL PERFORMANCE CURVES (TA = 25˚C) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, IL = 10 mA Normalized On-State Resistance, RON 3.0 Normalized to 1.0 at TA = 25˚C, IF = 10 mA IL = 1 mA 2.5 25 Number (pcs) -25 0 25 50 75 100 2.0 20 1.5 15 1.0 10 0.5 5 0 0 20 21 Ambient Temperature, TA (˚C) On-State Resistance, RON (Ω) TURN-ON TIME vs. FORWARD CURRENT 6.0 VL = 5 V, RL = 500 Ω 5.0 TURN-OFF TIME vs. FORWARD CURRENT 0.30 VL = 5 V RL = 500 Ω 0.25 Turn-off Time, tOFF (ms) Turn-on Time, tON (ms) 4.0 0.20 3.0 0.15 2.0 0.10 1.0 0.05 0 0 5 10 15 20 25 30 0 0 5 10 15 20 25 30 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VL = 5 V, RL = 500 Ω TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VL = 5 V, RL = 500 Ω 25 25 Number (pcs) 15 Number (pcs) 20 20 15 10 10 5 5 0 0.3 0.4 0 0.04 0.08 Turn-on Time, tON (ms) Turn-off Time, tOFF (ms) PS7241-AT1, PS7241-AT5 OCMOS TYPICAL PERFORMANCE CURVES (TA = 25˚C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 3.0 Normalized to 1.0 at TA = 25 °C IF = 10 mA VL = 5 V RL = 500 Ω NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25 °C IF = 10 mA VL = 5 V RL = 500 Ω 2.5 Normalized Turn-off Time, tOFF 100 Normalized Turn-on Time, tON 2.5 2.0 2.0 1.5 1.5 1.0 0.5 1.0 0.0 -25 0 25 50 75 0.0 -25 0 25 50 75 100 Ambient Temperature, TA (˚C) Ambient Temperature, TA (˚C) PHOTOCOUPLER TYPICAL PERFORMANCE CURVES (TA = 25˚C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 200 MAXIMUM COLLECTOR CURRENT vs. AMBIENT TEMPERATURE 75 Max Collector Current, IC (mA) Max Forward Current, IF (mA) 150 50 100 25 50 0 0 25 50 75 80 100 25 50 75 80 100 Ambient Temperature, TA (˚C) Ambient Temperature TA (˚C) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE FORWARD CURRENT vs. FORWARD VOLTAGE 100 TA = 100 °C 75 °C 50 °C 10 25 °C 0 °C -25 °C -55 °C Collector to Emitter Dark Current, ICEO (nA) 10000 40 V 24 V 10 V Forward Current, IF (mA) 1000 100 1 10 0.1 1 0.01 0.6 0.8 1 1.2 1.4 1.6 0.1 -60 -40 -20 0 20 40 60 80 100 Forward Voltage, VF (V) Ambient Temperature, TA (˚C) PS7241-AT1, PS7241-AT5 PHOTOCOUPLER TYPICAL PERFORMANCE CURVES (TA = 25˚C) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 30 20 25 mA 10 mA 50 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Collector Current, IC (mA) Collector Current, IC (mA) 10 5 mA 5 40 30 mA 30 20 m A 15 mA 2 1 2 mA 20 10 mA 10 IF = 1 mA 0.5 IF = 5 mA 0.2 0.1 0 0.2 0.4 0.6 0.8 1.0 0 2 4 6 8 10 Collector Saturation Voltage, VCE(sat), (V) Collector to Emitter Voltage, VCE (V) NORMALIZED OUTPUT CURRENT vs. AMBIENT TEMPERATURE 1.2 300 CURRENT TRANSFER RATIO (CTR) vs. FORWARD CURRENT VCE = 5 V Normalized Output Current, ∆CTR 1.0 Current Transfer Ratio, CTR (%) 250 0.8 200 0.6 150 0.4 100 0.2 Normalized to 1.0 at TA = 25 °C IF = 5 mA, VCE = 5 V -50 -25 0 25 50 75 100 50 0 0.05 0.1 0.5 1 5 10 50 Ambient Temperature, TA (˚C) Forward Current, IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 100 50 VCC = 5 V IC = 2 mA ton 1000 500 SWITCHING TIME vs. LOAD RESISTANCE IF = 5 mA VCC = 5 V TA = 25 °C CTR = 100% tf Switching Time, t (µs) Switching Time, t (µs) 100 50 ts toff 10 5 td ts 1 0.5 10 5 1 0.5 tr td 0.1 50 100 500 1K 2K 100 500 1K 5K 10K 50K 100K Load Resistance, RL (Ω) Load Resistance, RL (Ω) PS7241-AT1, PS7241AT5 TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) OUTLINE AND DIMENSIONS (REEL) 1.75 ± 0.1 2.0 ± 0.1 4.0 ± 0.1 1.55 ± 0.1 2.8 ± 0.1 7.5 ± 0.1 16.0 ± 0.3 10.45 ± 0.1 φ21.0 ± 0.8 φ100±5.0 0.3 1.55 ± 0.1 7.6 ± 0.1 12.0 ± 0.1 16.4- 0.0 +2.0 Notes: 1. Packaging : 1500 pcs/reel TAPING DIRECTION PS7241-AT1-F3 PS7241-AT5-F3 PS7241-AT1-F4 PS7241-AT5-F4 φ330 2.0 ± 0.5 φ13.0 ± 1.0 PS7241-AT1, PS7241AT5 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. • Avoid shorting between portion of frame and leads. * * Portion of frame EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 09/12/2001