PS7341CL-1A-E3-A

DATA SHEET Solid State Relay OCMOS FET PS7341C-1A,PS7341CL-1A CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs including current control circuit on the output side. Current control circuit of OCMOS FET protects this device from thermal breakdown and output circuit. They are suitable for analog signal control because of their low offset and high linearity. The PS7341CL-1A has a surface mount type lead. −NEPOC Series− FEATURES • Limit current (ILMT = 125 to 250 mA) • High isolation voltage (BV = 3 750 Vr.m.s.) • 1 channel type (1 a output) • Low LED operating current (IF = 2 mA) • Designed for AC/DC switching line changer • Small package (6-pin DIP) • Low offset voltage • Ordering number of taping product : PS7341CL-1A-E3, E4: 1 000 pcs/reel • Pb-Free product • Safety standards • UL approved: File No. E72422 • BSI approved: No. 8252/8253 • CSA approved: No. CA 101391 • SEMKO approved: No. 606398 • DEMKO approved: No. 309836 • NEMKO approved: No. P00100964 • FIMKO approved: No. FI 15188 • DIN EN60747-5-2 (VDE0884 Part2) approved (Option) APPLICATIONS • Exchange equipment • Measurement equipment • FA/OA equipment The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10308EJ02V0DS (2nd edition) Date Published September 2006 NS CP(K) Printed in Japan The mark shows major revised points. 1997, 2006 The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. PS7341C-1A,PS7341CL-1A PACKAGE DIMENSIONS (in millimeters) PS7341C-1A 9.25±0.5 TOP VIEW 6 5 4 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 1 2 3 7.62 6.5±0.5 3.3±0.3 4.15±0.3 3.5±0.3 0.5±0.1 1.34±0.1 0.25 M 0 to 15˚ 2.54 PS7341CL-1A 9.25±0.5 6 5 4 TOP VIEW 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 1 2 3 6.5±0.5 3.5±0.3 1.34±0.1 0.25 M 2.54 0.9±0.25 9.60±0.4 2 Data Sheet PN10308EJ02V0DS 0.10+0.10 –0.05 PS7341C-1A,PS7341CL-1A MARKING EXAMPLE No. 1 pin Mark PS7341C-1A NL601 Country Assembled Type Number Assembly Lot N L 6 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code Data Sheet PN10308EJ02V0DS 3 PS7341C-1A,PS7341CL-1A ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS7341C-1A PS7341CL-1A PS7341CL-1A-E3 PS7341CL-1A-E4 PS7341C-1A-A PS7341CL-1A-A PS7341CL-1A-E3-A PS7341CL-1A-E4-A Embossed Tape 1 000 pcs/reel Pb-Free Magazine case 50 pcs Packing Style Safety Standard Approval Standard products (UL, BSI, CSA, SEMKO, DEMKO, NEMKO, FIMKO approved) Application Part Number *1 PS7341C-1A *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10308EJ02V0DS PS7341C-1A,PS7341CL-1A ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current MOS FET Break Down Voltage Continuous Load Current *2 *1 Symbol IF VR PD IFP VL Connection A Connection B Connection C IL Ratings 50 5.0 50 1 400 120 120 240 Unit mA V mW A V mA Pulse Load Current *3 ILP 120 mA (AC/DC Connection) Power Dissipation Isolation Voltage *4 PD BV PT TA Tstg 560 3 750 610 −40 to +85 −40 to +125 mW Vr.m.s. mW °C °C Total Power Dissipation Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1% *2 Conditions: IF ≥ 2 mA. The following types of load connections are available. 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 4 IL IL L L IL + I L IL – + VL (DC) + VL (DC) – IL VL (AC/DC) L L + VL (DC) – Connection A IL Connection B Connection C *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output Pins 1-3 shorted together, 4-6 shorted together. Data Sheet PN10308EJ02V0DS 5 PS7341C-1A,PS7341CL-1A RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Output Capacitance Coupled LED On-state Current On-state Resistance Symbol VF IR ILoff Cout IFon Ron1 Ron2 Turn-on Time Turn-off Time *1, 2 Conditions IF = 10 mA VR = 5 V VD = 400 V VD = 0 V, f = 1 MHz IL = 120 mA IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 120 mA, t ≤ 10 ms IF = 10 mA, VO = 5 V, RL = 2 kΩ, PW ≥ 10 ms VI-O = 1.0 kVDC V = 0 V, f = 1 MHz IF = 10 mA, t = 5 ms, VL = 6 V MIN. TYP. 1.2 MAX. 1.4 5.0 Unit V µA µA pF 0.001 63 1.0 2.0 27 22 0.55 0.07 10 9 mA Ω 35 30 1.0 1.0 ton toff RI-O CI-O ILMT ms *1, 2 Isolation Resistance Isolation Capacitance Limit Current *3 Ω 1.1 pF 250 mA 125 200 *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor Rin RL VO monitor Output 90 % 10 % ton toff *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. *3 N rank : 125 to 250 mA M rank : 125 to 180 mA L rank : 170 to 250 mA 6 Data Sheet PN10308EJ02V0DS PS7341C-1A,PS7341CL-1A TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERTURE 100 Maximum Forward Current IF (mA) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERTURE 300 80 200 60 40 100 20 0 –25 0 25 50 75 85 100 0 –25 0 25 50 75 85 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERTURE 1.8 Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 200 f = 1 MHz Forward Voltage VF (V) 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 150 100 1.2 1.0 50 0.8 –25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature TA (˚C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10–6 Off-state Leakage Current ILoff (A) LOAD CURRENT vs. LOAD VOLTAGE IF = 10 mA, t = 5 ms 200 TA = 85 ˚C Load Current IL (mA) 10–7 100 10–8 –8.0 –4.0 –100 0 4.0 8.0 10–9 25 ˚C –200 10–10 0 100 200 300 400 500 Load Voltage VL (V) Applied Voltage VD (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10308EJ02V0DS 7 PS7341C-1A,PS7341CL-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERTURE 3.0 Normalized On-state Resistance Ron ON-STATE RESISTANCE DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 10 mA Number (pcs) 25 20 15 10 5 0 0 25 50 75 100 27 29 Ambient Temperature TA (˚C) On-state Resistance Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT 12 VO = 5 V 10 Turn-on Time ton (ms) Turn-off Time toff (ms) TURN-OFF TIME vs. FORWARD CURRENT 0.30 VO = 5 V 0.25 0.20 0.15 0.10 0.05 8 6 4 2 0 5 10 15 20 25 30 0 5 10 15 20 25 30 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 25 Number (pcs) TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V n = 50 pcs, IF = 10 mA, VO = 5 V Number (pcs) 25 20 15 10 5 0 20 15 10 5 0 0.5 0.7 0.07 0.08 Turn-on Time ton (ms) Turn-off Time toff (ms) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10308EJ02V0DS PS7341C-1A,PS7341CL-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERTURE 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERTURE 3.0 Normalized Turn-on Time ton Normalized Turn-off Time toff 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) NORMALIZED LIMIT CURRENT vs. AMBIENT TEMPERTURE 3.0 Normalized Limit Current ILMT 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, t = 5 ms, VL = 6 V 0 25 50 75 100 Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10308EJ02V0DS 9 PS7341C-1A,PS7341CL-1A TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.5 +0.1 –0 1.75±0.1 4.5 MAX. 16.0±0.3 7.5±0.1 10.3±0.1 1.55±0.1 12.0±0.1 10.4±0.1 0.3 4.0±0.1 Tape Direction PS7341CL-1A-E3 PS7341CL-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 13.0±0.2 330±2.0 100±1.0 R 1.0 21.0±0.8 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10308EJ02V0DS PS7341C-1A,PS7341CL-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) • Time (each pins) • Flux 350°C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. Data Sheet PN10308EJ02V0DS 11 PS7341C-1A,PS7341CL-1A (4) Cautions • To avoid quality degradation, assembling within 1 month after take this device out from covered pack is required. (Storage conditions 25°C, 65%RH MAX.) • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 12 Data Sheet PN10308EJ02V0DS PS7341C-1A,PS7341CL-1A • T he information in this document is current as of September, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10308EJ02V0DS 13 PS7341C-1A,PS7341CL-1A Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@ncsd-hk.necel.com Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209 NEC Electronics (Europe) GmbH http://www.eu.necel.com/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Compound Semiconductor Devices Division NEC Electronics Corporation URL: http://www.ncsd.necel.com/ 0604