NIPXI-5124

150 MHz, 200 MS/s, 12-Bit Digitizers NI 5124 • 2 channels simultaneously sampled at 12-bit resolution • 200 MS/s real-time and 4.0 GS/s random interleaved sampling • 150 MHz bandwidth • 200 mVpp to 20 Vpp input ranges • >75dBc SFDR • 8, 32, 256, or 512 MB of memory per channel • Edge, window, hysteresis, video, and digital triggering with 50 ps timestamping Operating Systems • Windows 2000/NT/XP Recommended Software • LabVIEW • LabWindows/CVI • Measurement Studio Driver Software (included) • NI-SCOPE • LabVIEW Express VIs • Scope Soft Front Panel • NI Spectral Measurements Toolkit (with 32, 256 and 512 MB models) Overview National Instruments 5124 high-resolution digitizers feature two 200 MS/s simultaneously sampled input channels with 12-bit resolution, 150 MHz bandwidth, and up to 512 MB of memory per channel in a 3U PXI or PCI module. NI 5124 devices use the highspeed PCI bus and the scatter-gather bus mastering of the NI MITE ASIC to move data to the computer at speeds up to 100 times faster than traditional instrument interfaces, thereby dramatically decreasing overall test time. With the Synchronization and Memory Core (SMC) architecture of an NI 5124, you can create mixed-signal systems using signal generators and digital waveform generators/analyzers or build a high-channel-count digitizer with sub-nanosecond synchronization between channels. Triggering, Clocking, and Synchronization • Edge, window, hysteresis, video, digital, triggering with 50 ps timestamping • Pre and posttrigger acquisition in single and multiple-record mode • Internal 200 MHz clock or external clock from 50 to 210 MHz • Phase lock to PXI 10 MHz reference or external reference from 1 to 20 MHz Software • IVI-compliant NI-SCOPE driver for LabVIEW, LabWindows/CVI, and Microsoft C++ and Visual Basic with more than 50 built-in measurements • Scope Soft Front Panel for interactive control • Spectral Measurements Toolkit for sophisticated frequency-domain measurements in communications, signal intelligence, and avionics applications Dual 200 MS/s, 12-Bit Input Channels for Time and Frequency Analysis • 150 MHz input bandwidth with antialias and noise filters • >75 dBc spurious-free dynamic range (SFDR) • 4.0 GS/s equivalent time sampling for repetitive signals • Independent channel selectable 200 mVpp to 20 Vpp input ranges • Independent channel selectable 50 Ω or 1 MΩ input impedance • 2-year calibration cycle and 0 to 55 ˚C operating temperature Applications Communications xDSL Wireless communications Baseband I & Q Consumer Electronics DVD, DVD-R, and PVR Set top box Gaming console Biomedical and Scientific Research Ultrasonic medical imaging Mass spectrometry Particle physics Aerospace/Defense Emulation of IC communications Consumer Electronics RADAR, SONAR, and LIDAR Satellite Signal intelligence Ordering Information Deep Onboard Memory • 8, 32, 256, or 512 MB of memory per channel • Capture more than 1 million triggered waveforms with multiple record hardware rearm • Stream data continuously from onboard memory to host memory or disk NI PCI-5124 ..............................................................779171-0M1 NI PXI-5124 ..............................................................778757-0M2 Includes NI-SCOPE driver and Scope Soft Front Panel. 32, 256, and 512 MB models include NI Spectral Measurements Toolkit. 1M (memory per channel): 1 (8 MB), 2 (32 MB), 3 (256 MB) 2M (memory per channel): 1 (8 MB), 2 (32 MB), 3 (256 MB), 4 (512 MB) Recommended PXI Switch NI PXI-2593..........................................................778793-01 150 MHz, 200 MS/s, 12-Bit Digitizers Specifications These specifications are valid for 0 to 55 ˚C for PXI, and 0 to 45 ˚C for PCI unless otherwise stated. RMS Noise (Noise filter enabled) Full Scale Input Range 200 mV 400 mV 1V 2V 4V 10 V 20 V (1 MΩ only) 50 Ω 1 MΩ PXI 94 µVrms, PCI 106 µVrms PXI 104 µVrms, PCI 116 µVrms 188 µVrms 192 µVrms 470 µVrms 480 µVrms 940 µVrms 960 µVrms 1.88 mVrms 1.92 mVrms 4.7 mVrms 4.8 mVrms – 9.4 mVrms Acquisition System Number of channels......................................... 2 simultaneously sampled Resolution......................................................... 12 bits Bandwidth (-3 dB) Full Scale Input Range 50 Ω 400 mV, 1 V, 2 V, 5 V, 10 V, 20 V 150 MHz 200 mV 85 MHz 1 MΩ 145 MHz1 75 MHz Bandwidth limit filters (software selectable) ....................................... 20 MHz noise (2-pole Bessel) 60 MHz antialias (4-pole elliptical) Maximum sampling rate .................................. 200 MS/s real-time, 4 GS/s random interleaved sampling Onboard sample memory ................................. 8, 32, 256, or 512 MB per channel (4, 16, 128, 256 million samples) Pre and posttrigger data points2 ...................... 0 to 100% of full record length Memory per channel (MB) 8 32 256 512 Maximum number of records 32,768 131,072 1,048,576 2,097,152 Intermodulation distortion3 (IMD) .................... -75 dBc Phase noise density (10 MHz input) ................