NACH

Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION • WIDE TEMPERATURE -40° ~+105°C • LONG LIFE (+105°C, 2000 HOURS) • 6.3 mm MAXIMUM HEIGHT • DESIGNED FOR REFLOW..SOLDERING CHARACTERISTICS Rated Voltage Range Rate Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C Working Voltage/Surge Voltage Max. Tan δ @120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test @105°C 2,000 Hours 4 ~ 50Vdc 0.1 ~ 220µF -40°C ~ +105°C ±20% (M), ±10% (K)* 0.01CV or 3µA whichever is greater W.V. (Vdc) S.V. (Vdc) Dissipation Factor Z-40°C/Z+20°C Z-55/Z+20°C Capacitance Change Tan δ Leakage Current * Optional ± 10% (K) Tolerance available on most values. Contact factory for availability. ** DF is 0.16 for NACH470M25V6.3X8 NACH Series includes all homogeneous materials *See Part Number System for Details RoHS Compliant 4 5 0.50 7 12 6.3 8.0 0.30 4 8 10 13 0.22 3 6 16 20 0.16 2 4 25 32 0.14** 2 4 35 44 0.12 2 3 50 63 0.12 2 3 Within ±25% of initial measured value Less than 200% of specified value Less than specified value MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 120Hz AND 105OC) Cap. (µF) 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 4.0 34 61 82 6.3 26 29 46 71 Working Voltage (Vdc) 10 16 25 35 22 28 28 39 55 43 65 70 50 1.0 2.0 3.0 5.0 10 16 16 23 35 - MAXIMUM ESR (Ω AT 120Hz AND 20OC) Cap. (µF) 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 4.0 17.7 8.31 3.77 6.3 22.6 15.1 10.6 4.98 Working Voltage (Vdc) 10 16 25 35 49.5 26.6 19.9 12.1 9.05 11.1 7.05 5.66 50 1993 906 604 424 199 90.6 60.4 42.4 19.9 - RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency Hz Correction Factor 50 ≤ f