NACS

Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION • LOW PROFILE, 5.5mm MAXIMUM HEIGHT • SPACE AND COST SAVINGS • DESIGNED FOR REFLOW SOLDERING CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 Minutes at 20°C Surge Voltage & Max. Tanδ Low Temperature Stability (Impedance Ratio @ 120Hz) Load Life Test at Rated W.V. 85°C 2,000 Hours 6.3 ~ 50Vdc** 4.7 ~ 220µF -40° ~ +85°C ±20%(M), ±10%(K)* 0.01CV or 3µA, whichever is greater W.V. (Vdc) S.V. (Vdc) Tanδ @ 120Hz/20°C W.V. (Vdc) Z-40°C/Z +20°C Z-55°C/Z +20°C Capacitance Change Tanδ Leakage Current NACS Series includes all homogeneous materials *See Part Number System for Details RoHS Compliant 6.3 10 16 25 35 50 8.0 13 20 32 44 63 0.28 0.24 0.20 0.16 0.14 0.12 6.3 10 16 25 35 50 4 3 2 2 2 2 10 8 6 4 4 4 Within ±25% of initial measured value Less than 200% of specified value Less than specified value *Optional ± 10% (K) Tolerance available on most values. Contact factory for availability. ** For higher voltages, 200V and 400V, see NACV series. MAXIMUM PERMISSIBLE RIPPLECURRENT (mA rms AT 120Hz AND 85OC) Cap. (µF) 4.7 10 22 33 47 56 100 150 220 6.3 31 36 46 47 71 74 Working Voltage (Vdc) 10 16 25 35 20 20 28 28 35 36 32 40 42 65 43 44 65 46 48 68 50 76 50 18 27 40 - MAXIMUM ESR (Ω AT 120Hz AND 20OC) Cap. (µF) 4.7 10 22 33 47 56 100 150 220 6.3 14.1 9.88 8.29 4.64 3.10 2.11 Working Voltage (Vdc) 10 16 25 35 - 26.5 23.2 18.1 15.1 12.1 10.6 12.6 10.1 8.04 7.04 8.47 7.06 5.65 7.11 5.92 4.74 3.98 2.66 50 42.3 19.9 9.05 - Dφ 0.3mm max. L + W I I - A RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency Hz 50 < f