NACX100K165X5.5TR13F

Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION • VERY LOW IMPEDANCE AT 100KHz • WIDE TEMPERATURE RANGE (-55 +105OC) • MAXIMUM 5.5mm HEIGHT • ANTI-SOLVENT (2 MINUTES) • DESIGNED FOR REFLOW SOLDERING CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 Minutes at 20°C W.V. (Vdc) S.V.(Vdc) Surge Voltage and Max. Tan δ Tan δ Z-25°C/Z+20°C Low Temperature Stability (Impedance Ratio @ 120Hz) Z-55°C/Z+20°C Capacitance Change High Temperature Load Life at 105°C and Rated Working Voltage Tan δ 1,000 hours Leakage Current 6.3 ~ 63V 0.47 ~ 150µF -55 ~ +105°C ±20% (M), ±10% (K)* 0.01CV or 3µA whichever is greater 6.3 10 16 25 35 50 63 8 13 20 32 44 63 79 0.24 0.20 0.16 0.14 0.12 0.12 0.12 3 2 2 2 2 2 2 5 4 4 3 3 3 3 Within ±25% of initial measured value Less than 200% of specified value Less than the specified value NACX Series includes all homogeneous materials *See Part Number System for Details RoHS Compliant * Optional ± 10% (K) Tolerance available on most values. Contact factory for availability. MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 100KHz AND 105OC) Cap. (µF) 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 6.3 68 105 105 155 155 10 105 105 155 155 Working Voltage (Vdc) 16 25 35 51 68 68 68 68 68 68 105 105 105 155 155 155 155 155 155 155 50 30 37 45 52 75 120 63 15 20 24 40 40 65 - MAXIMUM IMPEDANCE (Ω AT 100KHz AND 20OC) Cap. (µF) 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 6.3 2.3 1.1 1.1 0.6 0.6 10 1.1 1.1 0.6 0.6 Working Voltage (Vdc) 16 25 35 6.0 3.1 2.9 2.7 2.3 2.3 2.3 1.1 1.1 1.1 0.6 0.6 0.6 0.6 0.6 0.6 0.6 50 8.0 7.4 6.6 5.4 2.9 1.3 63 10 8.0 8.0 3.5 3.5 1.6 - ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 19 Surface Mount Aluminum Electrolytic Capacitors STANDARD PRODUCT AND SIZE DφxL (mm) Cap. (µF) 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 Code R47 1R0 2R2 3R3 4R7 100 220 330 470 101 221 Working Voltage (Vdc) 6.3 10 16 25 35 50 63 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 4x5.5 5x5.5 4x5.5 5x5.5 5x5.5 6.3x5.5 6.3x5.5 4x5.5 5x5.5 5x5.5 6.3x5.5 6.3x5.5 5x5.5 5x5.5 6.3x5.5 6.3x5.5 5x5.5 6.3x5.5 6.3x5.5 6.3x5.5 6.3x5.5 6.3x5.5 6.3x5.5 6.3x5.5 - NACX Series Dφ 0.3mm max. L + W I I - A P DIMENSIONS (mm) Case Size Dφ±0.5 L max. A/B±0.2 I ± 0.2 W 4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 P±0.2 1.0 1.4 2.2 B PART NUMBER SYSTEM NACX 100 M 25V 5x5.5 RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF TR 13 F Series ® 20 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com