PCX1D121MCS1GS

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCX Chip Type, High Voltage / Long Life Chip Type, High Voltage / Long Life High reliability, High voltage (to 50V). High ESR, reliability, Low High High ripplevoltage current.(to 50V). Low current. LongESR, life ofHigh 1500ripple to 3000 hours at 125°C. Long life of: 1500 3000 hours at 125°C. SMD type Lead to free reflow soldering condition at SMD type : Lead free reflow soldering condition at 260°C peak complete correspondence. 260°C peak Compliant tocomplete the RoHScorrespondence. directive (2011/65/EU,(EU)2015/863). Compliant the RoHSPlease directive (2011/65/EU,(EU)2015/863). AEC-Q200to compliant. contact us for details. AEC-Q200 compliant. Please contact us for details. PCR PCR Higher Capacitance Higher Capacitance PCX PCX Higher Temperature Higher Temperature PCV PCV Specifications Specifications Item Item Category Temperature Range Category Temperature Range Rated Voltage Range Rated Voltage Range Rated Capacitance Range Rated Capacitance Range Capacitance Tolerance Capacitance Tolerance Tangent of loss angle (tan δ) Tangent of loss angle (tan δ) ESR ( 1) ESR ( 1) Leakage Current ( 2) Leakage Current ( 2) Temperature Characteristics Temperature Characteristics (Max.Impedance Ratio) (Max.Impedance Ratio) Performance Characteristics Performance Characteristics – 55 to +125°C – 55 to +125°C 16 to 50V 16 to 50V 5.6 to 390µF 5.6 to 390µF ± 20% at 120Hz, 20°C ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C (100kHz) Z+125°C / Z+20°C 1.25 (100kHz) Z+125°C Z+20°C 1.25 Z– 55°C / /Z+20°C 1.25 1.25 Z– 55°C / Z+20°C Endurance Endurance The specifications listed at right shall be met when the The specifications listedtoat20°C right after shall the be met the is capacitors are restored ratedwhen voltage capacitors restored after the ratedatvoltage = 6.3:1500hours) applied for are 3000 hours to (φD20°C 125°C.is applied for 3000 hours (φD = 6.3:1500hours) at 125°C. Capacitance change Capacitance change tan δ tan δ ( 1) ESR ( 1) ESR Leakage current ( 2) Leakage current ( 2) Within ± 20% of initial capacitance value ( 3) Within or ± 20% of the initial capacitance 150% less of initial specified value value ( 3) 150% or or less less of of the the initial initial specified specified value value 150% 150%than or less of theto initial specified value value Less or equal the initial specified Less than or equal to the initial specified value Damp Heat Damp Heat (Steady State) (Steady State) The specifications listed at right shall be met when the The specifications listedtoat20°C right after shall the be met the is capacitors are restored ratedwhen voltage capacitors restored to60°C, 20°C after applied for are 1000 hours at 90% the RH.rated voltage is applied for 1000 hours at 60°C, 90% RH. Capacitance change Capacitance change tan δ tan δ ( 1) ESR ( 1) ESR Leakage current ( 2) Leakage current ( 2) Within ± 20% of initial capacitance value ( 3) Within or ± 20% of the initial capacitance 150% less of initial specified value value ( 3) 150% 150% or or less less of of the the initial initial specified specified value value 150% or less of theto initial specified value value Less than or equal the initial specified Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions After soldering the capacitor under soldering conditions listed at prescribed here, the capacitor shallthe meet the specifications prescribed here, the capacitor shall meet the specifications listed at right. right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. Capacitance change Within ± 10% of the initial capacitance value ( 3) Pre-heating be done at 150 to 200°C at and for 60 tosurface 180 sec. The durationshall for over +230°C temperature capacitor shall Capacitance change Within ± 10% thethe initial capacitance 130% or less of than initial specifiedvalue value( 3) Theexceed duration60forseconds. over +230°C temperature at capacitor surface shall tan δ Resistance to not 130% or or less less than than the the initial initial specified specified value value tan δ ( 1) Resistance to notcase exceed seconds. is 250°C or less, reflow soldering shall be ESR 130% In peak60temperature Soldering Heat ( 1) ESR 130%than or less than the initial specified value In case peak temperature is 250°C or less, reflow soldering shall be Soldering Heat Leakage current ( 2) Less or equal to the initial specified value two times maximum. Leakage current ( 2) Less than or equal to the initial specified value twocase times maximum. In peak temperature is 260°C or less, reflow soldering shall be In case peak temperature is 260°C or less, reflow soldering shall be once. once. Measurement for solder temperature profile shall be made at the Measurement capacitor top. for solder temperature profile shall be made at the capacitor top. Marking Navy blue print on the case top Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 1 ESR should be measured both of the terminal ends closest protrudeof through theDC plastic 2 Conditioning : If any doubtat arises, measure the leakage currentwhere after the the terminals voltage treatment applying ratedplatform. voltage continuously to the capacitor for 120 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. minutes at 105°C. Type numbering system (Example : 35V 39µF) 3 Initial value : The value before test of examination of resistance to soldering. Type numbering system (Example : 35V 39µF) 3 Initial value : The value before test of examination of resistance to soldering. 1 1 Vibration Resistance Vibration Resistance Series Series Voltage (V:35V) Voltage (V:35V) 0.50.5 MAX. MAX. E E B±0.2 B±0.2 Plastic platform Plastic platform L±0.5 L±0.5 Negative Negative H H 0.3 MAX. 0.3 MAX. C±0.2 C±0.2 B±0.2 B±0.2 φD±0.5 φD±0.5 Lot No. Lot No. CX CX 3 93 9 VV 0 10 21 2 Capacitance Capacitance L +0.1 -0.4 L +0.1 -0.4 0.50.5 MAX. MAX. Voltage (V:35V) Voltage (V:35V) Series Series C±0.2 C±0.2 H H Positive Positive Positive Positive A±0.2 A±0.2 0.3 MAX. E E Lot No. Lot No. CX CX 3 93 9 VV 0 10 21 2 Capacitance Capacitance Plastic platform Plastic platform 0.3 MAX. φD±0.5 φD±0.5 Standard Standard Negative Negative Aid electrode Aid electrode Dimension table in next page. Dimension table in next page. 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 10 11 12 13 14 9 10 11 12 13 14 PCX 1 V 3 9 0 MC L 1 GS PCX 1 V 3 9 0 MC L 1 GS Standard Standard Size Size φD φD L L A A B B C C E E H H φ6.3 ×6L φ6.3 ×6L 6.3 6.3 5.9 5.9 7.3 7.3 6.6 6.6 6.6 6.6 2.1 2.1 0.5 to 0.8 0.5 to 0.8 Voltage Voltage Taping code Taping code Size code Size code Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (39µF) Rated capacitance (39µF) Rated voltage (35V) Rated voltage (35V) Series name Series name Type Type A±0.2 A±0.2 Dimensions Dimensions φ6.3 ×8L φ6.3 ×8L 6.3 6.3 7.9 7.9 7.3 7.3 6.6 6.6 6.6 6.6 2.1 2.1 0.5 to 0.8 0.5 to 0.8 φ8 ×7L φ88.0 ×7L 8.0 6.9 6.9 9.0 9.0 8.3 8.3 8.3 8.3 3.2 3.2 0.8 to 1.1 0.8 to 1.1 φ8 ×10L φ88.0 ×10L 8.0 9.9 9.9 9.0 9.0 8.3 8.3 8.3 8.3 3.2 3.2 0.8 to 1.1 0.8 to 1.1 φ8 ×12L φ88.0 ×12L 8.0 11.9 11.9 9.0 9.0 8.3 8.3 8.3 8.3 3.2 3.2 0.8 to 1.1 0.8 to 1.1 φ10 ×8L φ10 ×8L 10.0 10.0 7.9 7.9 11.0 11.0 10.3 10.3 10.3 10.3 4.6 4.6 0.8 to 1.1 0.8 to 1.1 φ10 ×10L φ10 ×10L 10.0 10.0 9.9 9.9 11.0 11.0 10.3 10.3 10.3 10.3 4.6 4.6 0.8 to 1.1 0.8 to 1.1 (mm) (mm) φ10×12.7L φ10×12.7L 10.0 10.0 12.6 12.6 11.0 11.0 10.3 10.3 10.3 10.3 4.6 4.6 0.8 to 1.1 0.8 to 1.1 Configuration Configuration Code Configuration Code Standard L Standard L Vibration Resistance S Vibration Resistance S Vibration Resistance Vibration Resistance Size Size φD φD L L A A B B C C E E H H φ6.3 ×8L φ6.3 ×8L 6.3 6.3 7.5 7.5 7.3 7.3 6.6 6.6 6.6 6.6 2.5 2.5 0.5 to 0.8 0.5 to 0.8 φ8×10.5L φ8×10.5L 8.0 8.0 10.0 10.0 9.0 9.0 8.3 8.3 8.3 8.3 3.1 3.1 1.1 to 1.5 1.1 to 1.5 (mm) (mm) φ10×10.5L φ10×13.2L φ10×10.5L φ10×13.2L 10.0 10.0 10.0 10.0 10.0 12.7 10.0 12.7 11.0 11.0 11.0 11.0 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 4.6 4.6 4.6 4.6 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 Frequency coefficient of rated ripple current Frequency coefficient of rated ripple current V 16 20 25 35 50 Frequency 120Hz 1kHz 10kHz 100kHz or more V 16 20 25 35 50 Frequency 120Hz 1kHz 10kHz 100kHz or more Code C D E V H Coefficient 0.05 0.30 0.70 1.00 Code C D E V H Coefficient 0.05 0.30 0.70 1.00 φ6.3×8L(φ6.3×8L),φ8×10L(φ8×10.5L),φ10×10L(φ10×10.5L),φ10×12.7L(φ10×13.2L) : φ6.3×8L(φ6.3×8L),φ8×10L(φ8×10.5L),φ10×10L(φ10×10.5L),φ10×12.7L(φ10×13.2L) : The vibration structure-resistant product is also available upon request, please ask for details. The product is also available upon request, please ask for details. ( ) vibration : Size ofstructure-resistant the vibration structure-resistant product. ( ) : Size of the vibration structure-resistant product. CAT.8100K CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCX Dimensions Rated Voltage （V） （code） 16 （1C） 20 （1D） Surge Voltage (V) 18.4 23.0 Rated Capacitance （µF） 28.7 50 （1H） 40.2 57.5 （ ） Rated Ripple （mArms /100kHz） ≦105℃ (＊3) 105℃＜ ≦125℃ (＊3) Part Number 47 6.3× 6 0.12 150 55 1000 390 PCX1C470MCL1GS 8×7 0.12 262 45 1300 530 PCX1C820MCL1GS 100 6.3 ×8 0.12 320 33 1500 460 PCX1C101MCL1GS 150 ▲ 8× 10 0.12 480 28 2000 780 PCX1C151MCL6GS 150 10× 8 0.12 480 33 1900 830 PCX1C151MCL1GS 220 8× 12 0.12 704 27 2300 870 PCX1C221MCL1GS 270 10× 10 0.12 864 27 2300 830 PCX1C271MCL1GS 390 10× 12.7 0.12 1248 26 2700 1040 PCX1C391MCL1GS 33 6.3×6 0.12 132 60 900 380 PCX1D330MCL1GS 56 8× 7 0.12 224 50 1300 500 PCX1D560MCL1GS 68 6.3× 8 0.12 272 34 1450 470 PCX1D680MCL1GS 120 ▲ 8× 10 0.12 480 29 1900 770 PCX1D121MCL6GS 120 10× 8 0.12 480 35 1800 810 PCX1D121MCL1GS 150 8× 12 0.12 600 28 2200 860 PCX1D151MCL1GS 180 10× 10 0.12 720 28 2300 800 PCX1D181MCL1GS 270 10× 12.7 0.12 1080 27 2700 1020 PCX1D271MCL1GS 6.3× 6 0.12 110 65 900 360 PCX1E220MCL1GS 39 8× 7 0.12 195 55 1200 480 PCX1E390MCL1GS 56 6.3× 8 0.12 280 35 1400 450 PCX1E560MCL1GS 82 ▲ 8× 10 0.12 410 30 1900 760 PCX1E820MCL6GS 82 10× 8 0.12 410 36 1800 800 PCX1E820MCL1GS 120 ▲ 8× 12 0.12 600 29 2200 850 PCX1E121MCL6GS 120 10× 10 0.12 600 29 2200 790 PCX1E121MCL1GS 180 10× 12.7 0.12 900 28 2600 1010 PCX1E181MCL1GS 6.3× 6 0.12 70 85 800 310 PCX1V100MCL1GS 10 35 （1V） tan δ Leakage Current ESR (mΩ) （µA） at 20℃ after （20℃/100kHz） 2 minutes 82 22 25 （1E） Case Size φD×L（mm） 18 8× 7 0.12 126 60 1100 450 PCX1V180MCL1GS 27 6.3× 8 0.12 189 45 1300 450 PCX1V270MCL1GS 39 ▲ 8× 10 0.12 273 35 1800 700 PCX1V390MCL6GS 39 10× 8 0.12 273 41 1700 750 PCX1V390MCL1GS 56 8× 12 0.12 392 33 2000 780 PCX1V560MCL1GS 68 10× 10 0.12 476 30 2200 740 PCX1V680MCL1GS 100 10× 12.7 0.12 700 29 2600 990 PCX1V101MCL1GS 5.6 6.3× 6 0.12 56 105 700 280 PCX1H5R6MCL1GS 10 8× 7 0.12 100 75 1000 410 PCX1H100MCL1GS 12 6.3× 8 0.12 120 65 1100 380 PCX1H120MCL1GS 22 ▲ 8× 10 0.12 220 37 1700 680 PCX1H220MCL6GS 22 10× 8 0.12 220 56 1400 730 PCX1H220MCL1GS 27 8× 12 0.12 270 35 2000 760 PCX1H270MCL1GS 33 10× 10 0.12 330 31 2200 630 PCX1H330MCL1GS 47 10× 12.7 0.12 470 30 2500 970 PCX1H470MCL1GS (＊3) Ambient temperature of a capacitor No marked, 1 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K