UES1E101MPM

ALUMINUM ELECTROLYTIC CAPACITORS UES Bi-Polarized, For Audio Equipment Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UES UFW Bi-polarized Specifications Item Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.20 16 0.16 25 0.16 35 0.14 50 0.12 Measurement frequency : 120Hz Stability at Low Temperature Impedance ratio (MAX.) Z– 25°C / Z+20°C Z– 40°C / Z+20°C 50 2 4 35 2 4 25 2 4 16 2 4 10 3 6 6.3 4 8 Rated voltage (V) Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C with the polarity inverted every 250 hours. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on clear green sleeve. Capacitance change tan δ Leakage current Radial Lead Type Within ±20% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 10V 47µF) Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 11 P ±0.5 φD+0.5 MAX. UE S 1 A 4 7 0 MEM Configuration Capacitance tolerance ( ±20%) (mm) Pressure relief vent (φ6.3up) φD L+ MAX. 15MIN 4MIN 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 φd 0.6 0.6 0.6 0.6 0.8 0.8 Rated capacitance (47µF) Rated voltage (10V) Series name φD Code 5 DM 6.3 EM 8 · 10 PM 12.5 · 16 HM Type (φD < 8) 1.0 (φD 8) 1.5 Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UES Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） 16 （1C） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 33 5× 11 0.24 47 6.3× 11 0.24 6.237 UES0J330MDM 8.883 UES0J470MEM ） 8× 11.5 0.24 18.9 UES0J101MPM 220 10× 12.5 0.24 41.58 UES0J221MPM 330 10× 16 0.24 62.37 UES0J331MPM 470 10× 20 0.24 88.83 UES0J471MPM 1000 12.5× 25 0.24 189 UES0J102MHM 22 5× 11 0.20 6.6 UES1A220MDM 33 6.3× 11 0.20 9.9 UES1A330MEM 47 6.3×11 0.20 14.1 UES1A470MEM 100 10× 12.5 0.20 30 UES1A101MPM 220 10× 16 0.20 66 UES1A221MPM 330 10× 20 0.20 99 UES1A331MPM 470 12.5× 20 0.20 141 UES1A471MHM 1000 16× 25 0.20 300 UES1A102MHM 10 5× 11 0.16 22 6.3× 11 0.16 10.56 UES1C220MEM 33 6.3× 11 0.16 15.84 UES1C330MEM 4.8 UES1C100MDM 47 8× 11.5 0.16 22.56 UES1C470MPM 100 10× 12.5 0.16 48 UES1C101MPM 220 10× 20 0.16 105.6 UES1C221MPM 330 12.5× 20 0.16 158.4 UES1C331MHM 470 12.5× 25 0.16 225.6 UES1C471MHM 1000 16× 25 0.16 480 5×11 0.16 10 5× 11 22 6.3× 11 UES1C102MHM 3.525 UES1E4R7MDM 0.16 7.5 UES1E100MDM 0.16 16.5 UES1E220MEM 33 8× 11.5 0.16 24.75 UES1E330MPM 47 10× 12.5 0.16 35.25 UES1E470MPM 100 10× 16 0.16 75 UES1E101MPM 220 12.5× 25 0.16 165 UES1E221MHM 330 12.5× 25 0.16 247.5 UES1E331MHM 470 16× 25 0.16 352.5 UES1E471MHM 16× 31.5 0.16 750 UES1E102MHM 1000 4.7 10 35 （1V） Part Number （ 100 4.7 25 （1E） Leakage Current （µA） at 20℃ after 1 minute 5× 11 0.14 6.3× 11 0.14 10.5 4.935 UES1V4R7MDM UES1V100MEM 22 8×11.5 0.14 23.1 UES1V220MPM 33 10× 12.5 0.14 34.65 UES1V330MPM 47 49.35 UES1V470MPM 10× 12.5 0.14 100 10× 20 0.14 105 UES1V101MPM 220 12.5× 25 0.14 231 UES1V221MHM 330 16× 25 0.14 346.5 UES1V331MHM 470 16× 25 0.14 493.5 UES1V471MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UES Dimensions Rated Voltage （V） （code） 50 （1H） Rated Capacitance （µF） Leakage Current （µA） at 20℃ after 1 minute Part Number 0.12 3 UES1H010MDM 5× 11 0.12 3.3 UES1H2R2MDM 5× 11 0.12 4.95 UES1H3R3MDM 6.3× 11 0.12 7.05 UES1H4R7MEM Case Size φD×L（mm） tan δ 1 5× 11 2.2 3.3 4.7 （ ） 10 8× 11.5 0.12 15 UES1H100MPM 22 10× 12.5 0.12 33 UES1H220MPM 33 10× 16 0.12 49.5 UES1H330MPM 70.5 UES1H470MPM 47 10× 20 0.12 100 12.5× 25 0.12 150 UES1H101MHM 220 16× 25 0.12 330 UES1H221MHM 330 16× 31.5 0.12 495 UES1H331MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K