UFG1H0R1MDM

ALUMINUM ELECTROLYTIC CAPACITORS UFG High Grade Standard Type, For Audio Equipment "Fine Gold" MUSE acoustic series suited for high grade audio equipment, using state of the art etching techniques. Rich sound in the bass register and clearer high end, most suited for AV equipment. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. UKZ UFG High Grade Specifications Item High Grade UFW Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current ※ –40 to +85°C 6.3 to 100V 1 to 10000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (max.) 6.3 10 16 25 35 50 63 80 100 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 For capacitance of more than 1000µF add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz Stability at Low Temperature 6.3 10 16 25 35 50 63 80 100 Z(–25°C) / Z(+20°C) 4 3 2 2 2 2 2 2 2 Z(–40°C) / Z(+20°C) 8 6 4 4 3 3 3 3 3 Rated voltage (V) Impedance ratio (max.) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. Endurance Capacitance change Within ±20% of the initial measurement for units of not more than 16V or φ6.3 Within ±15% of the initial measurement for units of not less than 25V or above φ6.3 tan δ 150% or less than the initial specified value Leakage current Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on gold sleeve. ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 10V 47µF) 1 Sleeve (PET) 2 3 4 5 6 7 8 9 10 11 U F G 1 A 4 7 0 M DM φd P±0.5 φD+0.5max. Configuration Capacitance tolerance (±20%) φD Rated capacitance (47µF) 5 6.3 Rated voltage (10V) Pressure relief vent (φ6.3up) Series name L± 15min. Code DM EM 8 · 10 PM 12.5 to 18 HM Type 4min. (mm) φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.6 0.6 0.8 0.8 0.8 Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 1 to 47 0.75 1.00 1.35 1.57 2.00 100 to 470 0.80 1.00 1.23 1.34 1.50 1000 to 10000 0.85 1.00 1.10 1.13 1.15 Cap.(µF) (L < 20) 1.5 (L 20) 2.0  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Dimension table in next page. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UFG Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 470 6.3 （0J） 10 （1A） 16 （1C） 35 （1V） tan δ Leakage Current （µA） at 20℃ after 1 minute Rated Ripple （mArms） （85℃/120Hz） Part Number （ ） 10× 12.5 0.22 29.61 270 　UFG0J471MPM 1000 10 ×20 0.22 63 485 　UFG0J102MPM 2200 12.5×25 0.24 138.6 867 　UFG0J222MHM 3300 16 ×25 0.26 207.9 1135 　UFG0J332MHM 4700 16 ×30.5 0.28 296.1 1431 　UFG0J472MHM 6800 18 ×35.5 0.32 428.4 1810 　UFG0J682MHM 10000 18× 40 0.40 630 2100 　UFG0J103MHM 47 5× 11 0.19 60 ※UFG1A470MDM 100 6.3×11 0.19 10 99 ※UFG1A101MEM 4.7 220 8×11.5 0.19 22 170 　UFG1A221MPM 330 10×12.5 0.19 33 247 　UFG1A331MPM 470 10×16 0.19 47 330 　UFG1A471MPM 1000 12.5 ×20 0.19 100 601 　UFG1A102MHM 2200 16 ×25 0.21 220 1047 　UFG1A222MHM 3300 16 ×30.5 0.23 330 1520 　UFG1A332MHM 4700 16 ×35.5 0.25 470 1840 　UFG1A472MHM 6800 18 ×40 0.29 680 2049 　UFG1A682MHM 33 5×11 0.16 57 ※UFG1C330MDM 47 6.3×11 0.16 5.28 74 ※UFG1C470MEM 100 8×11.5 0.16 16 128 　UFG1C101MPM 220 10×12.5 0.16 35.2 226 　UFG1C221MPM 330 10×16 0.16 52.8 309 　UFG1C331MPM 470 10×20 0.16 75.2 406 　UFG1C471MPM 1000 12.5 ×25 0.16 160 723 　UFG1C102MHM 2200 16 ×25 0.18 352 1290 　UFG1C222MHM 3300 16 ×35.5 0.20 528 1720 　UFG1C332MHM 4700 18 ×35.5 0.22 752 2140 　UFG1C472MHM 22 5×11 0.14 5.5 50 ※UFG1E220MDM 33 6.3× 11 0.14 8.25 70 ※UFG1E330MEM 47 6.3× 11 0.14 11.75 85 ※UFG1E470MEM 0.14 25 140 　UFG1E101MPM 100 25 （1E） Case Size φD×L（mm） 8×11.5 7.52 220 10 ×16 0.14 55 260 　UFG1E221MPM 330 10 ×20 0.14 82.5 351 　UFG1E331MPM 470 12.5×20 0.14 117.5 476 　UFG1E471MHM 1000 16× 25 0.14 250 854 　UFG1E102MHM 2200 16× 35.5 0.16 550 1570 　UFG1E222MHM 3300 18× 40 0.18 825 1794 　UFG1E332MHM 22 6.3×11 0.12 7.7 60 ※UFG1V220MEM 33 6.3× 11 0.12 11.55 75 ※UFG1V330MEM 47 8× 11.5 0.12 16.45 101 　UFG1V470MPM 100 10 ×12.5 0.12 35 176 　UFG1V101MPM 220 10 ×20 0.12 77 320 　UFG1V221MPM 330 12.5 ×20 0.12 115.5 446 　UFG1V331MHM 470 12.5 ×25 0.12 164.5 590 　UFG1V471MHM 1000 16× 25 0.12 350 1060 　UFG1V102MHM 2200 18× 35.5 0.14 770 1840 　UFG1V222MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UFG Dimensions Rated Voltage （V） （code） 50 （1H） Rated Capacitance （µF） （ ） Rated Ripple （mArms） （85℃/120Hz） Part Number 5× 11 0.10 3 9 ※UFG1H010MDM 5× 11 0.10 3 18 ※UFG1H2R2MDM 3.3 5× 11 0.10 3 22 ※UFG1H3R3MDM 4.7 5× 11 0.10 3 27 ※UFG1H4R7MDM 10 5× 11 0.10 5 39 ※UFG1H100MDM 22 6.3×11 0.10 11 65 ※UFG1H220MEM 33 8×11.5 0.10 16.5 93 　UFG1H330MPM 47 8×11.5 0.10 23.5 111 　UFG1H470MPM 100 10× 16 0.10 50 215 　UFG1H101MPM 220 12.5× 20 0.10 110 390 　UFG1H221MHM 330 12.5× 20 0.10 165 488 　UFG1H331MHM 10 16× 25 0.10 235 650 　UFG1H471MHM 16 ×30.5 0.10 500 1143 　UFG1H102MHM 6.3×11 0.09 50 ※UFG1J100MEM 6.3 22 8×11.5 0.09 13.86 85 　UFG1J220MPM 33 8×11.5 0.09 20.79 105 　UFG1J330MPM 47 100 10×12.5 0.09 29.61 140 　UFG1J470MPM 10 ×20 0.09 63 255 　UFG1J101MPM 220 12.5×20 0.09 138.6 420 　UFG1J221MHM 330 12.5×25 0.09 207.9 541 　UFG1J331MHM 470 16×25 0.09 296.1 840 　UFG1J471MHM 18 ×35.5 0.09 630 1400 　UFG1J102MHM 6.3×11 0.09 8 55 ※UFG1K100MEM 0.09 17.6 100 　UFG1K220MPM 1000 10 22 8× 11.5 33 10 ×12.5 0.09 26.4 130 　UFG1K330MPM 47 10× 16 0.09 37.6 170 　UFG1K470MPM 100 12.5× 20 0.09 80 270 　UFG1K101MHM 220 12.5× 25 0.09 176 490 　UFG1K221MHM 330 16× 30.5 0.09 264 650 　UFG1K331MHM 470 16 ×35.5 0.09 376 920 　UFG1K471MHM 1 5×11 0.08 3 15 ※UFG2A010MDM 2.2 5× 11 0.08 3 22 ※UFG2A2R2MDM 3.3 5× 11 0.08 3.3 27 ※UFG2A3R3MDM 4.7 100 （2A） Leakage Current （µA） at 20℃ after 1 minute 1 470 80 （1K） tan δ 2.2 1000 63 （1J） Case Size φD×L（mm） 5× 11 0.08 36 ※UFG2A4R7MDM 10 8× 11.5 0.08 10 4.7 65 　UFG2A100MPM 22 10 ×12.5 0.08 22 110 　UFG2A220MPM 33 10× 16 0.08 33 150 　UFG2A330MPM 47 10× 20 0.08 47 190 　UFG2A470MPM 100 12.5× 20 0.08 100 300 　UFG2A101MHM 220 16× 25 0.08 220 549 　UFG2A221MHM 330 16× 30.5 0.08 330 734 　UFG2A331MHM 470 18× 35.5 0.08 470 980 　UFG2A471MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L