UMT1H100MDD

ALUMINUM ELECTROLYTIC CAPACITORS MT 5mmL, Wide Temperature Range series Wide temperature range of – 55 ~ +105°C, with 5mm height. Adapted to the RoHS directive (2002/95/EC). MV Long life MT High Temperature MA Specifications Item Category Temperature Range Voltage Range Rated Capacitance Range Rated Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 55 ~ +105°C 4 ~ 50V 0.1 ~ 100µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 4 0.37 6.3 0.28 4 6 12 10 0.24 6.3 3 8 16 0.20 10 3 5 25 0.16 16 2 4 35 50 Figures in ( ) are for 0.13 (0.14) 0.12 (0.14) φ 3 product. 25 2 3 35 2 3 50 2 3 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C After 1000 hours' application of rated voltage at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Endurance Within ±25% of initial value (φ 3mm unit,and < 16V) = Within ±20% of initial value ( > 25V) = 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 25V 10µF) fd Sleeve (P.E.T.) f D+0.5MAX UMT 1 E 1 0 0 MDD (f 3 : P±0.3) (mm) P ±0.5 1 2 3 4 5 6 7 8 9 10 11 12 2 Size code L+1MAX 15 MIN 4 MIN f D 3 4 5 6.3 P 1.0 1.5 2.0 2.5 f d 0.40 0.45 0.45 0.45 • Please refer to page 21 about the end seal configulation. 1 Configuration Pb-free leadwire fD Pb-free PET sleeve 3 CD 4 ~ 6.3 DD 16 1C 25 1E D Code 3 2 4 ~ 6.3 Ñ Configuration 1 Capacitance tolerance (± 20%) Rated capacitance (10mF) Rated voltage (25V) Series name Type f Dimensions Cap.(µF) V Code 2 For f 3mm unit, place size code of 2 to 12th digit. 35 1V 50 1H 4×5 1.0 4×5 2.6 4×5 3.2 4×5 3.8 6.2 (5.9) 4×5 11 (9) 4×5 14 4×5 19 5×5 30 6.3 × 5 4 0G 6.3 0J 10 1A 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 4×5 5×5 5×5 6.3 × 5 22 30 36 60 4×5 5×5 5×5 6.3 × 5 22 30 36 60 5×5 5×5 6.3 × 5 27 35 46 4×5 5×5 6.3 × 5 6.3 × 5 18 (14) 30 40 50 4×5 5×5 6.3 × 5 6.3 × 5 13 (10) 23 38 48 3 ×5 4 ×5 4 ×5 5×5 6.3 × 5 7.5 11 (9) 15 25 48 φ D × L (mm) Case size Rated ripple Size φ3 × 5 is available for capacitors marked " " Figures in ( ) are for φ 3 product. Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz ~ 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V