UPM1H560MED1TD

ALUMINUM  ELECTROLYTIC  CAPACITORS UPM Low Impedance, High Reliability High reliability withstanding 5000 hour load life at +105°C (3000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. UPM Smaller UPW Specifications Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current ※ – 55 to +105°C 6.3 to 100V 22 to 15000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV(µA). For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Tangent of loss angle (tan δ) 6.3 0.22 Rated Voltage (V) tan δ (max.) 10 0.19 16 0.16 Rated voltage (V) Impedance ratio (max.) Z(–55°C) / Z(+20°C) Stability at Low Temperature The specifications listed below shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied at 105°C for the condition listed at right.The peak voltage shall not exceed the rated voltage. Endurance Measurement frequency : 120Hz at 20°C 25 0.14 35 0.12 6.3 · 10 4 16 3 Rated Voltage 63 to 100 0.08 50 0.10 25 · 35 50 to 100 3 2 φD(mm) 6.3〜100V 120Hz φ8 > = φ10 3000hrs. 5000hrs. Capacitance change Within ±20% of the initial capacitance value 200% or less than the initial specified value tan δ Less than or equal to the initial specified value Leakage current Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. Marking Printed with white color letter on dark brown sleeve. Capacitance change Within ±20% of the initial capacitance value 150% or less than the initial specified value tan δ Less than or equal to the initial specified value Leakage current ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Frequency coefficient of rated ripple current φd Sleeve (PET) Frequency coefficient 15000 P±0.5 φD+0.5 max. Rated voltage 10000 6800 4700 Pressure relief vent 15min. L± 3300 4min. 2200 (mm) (φD < 10) 1.5 (φD > = 10) 2.0 φD 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.6 0.8 0.8 1500 1000 680 470 In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. 330 6.3 to 100V  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. 2 3 4 5 6 7 8 9 10 150 Cap.(μF) Type numbering system (Example : 25V 470µF) 1 220 (10kHz to 200kHz=1) 11 12 U PM 1 E 4 7 1 M PD 100 68 47 33 Size code Configuration Capacitance tolerance ( ±20%) Rated capacitance (470µF) Rated voltage (25V) Type Small Dia Low Profile Code 6 120Hz 22 300Hz 1kHz 15 10 2.2 0 0.5 0.6 0.7 0.8 Frequency coefficient 0.9 1.0 Series name Type Configuration φD 8 · 10 12.5 to 18 Pb-free leadwire Pb-free PET sleeve PD HD Dimension table in next page. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 390 8× 11.5 0.22 Leakage Current （µA） at 20℃ after 1 minute Impedance（Ω） max. Rated Ripple （mArms） 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz 73.71 0.17 0.34 445 345 （ ） Part Number 　UPM0J391MPD 470 8× 15 0.22 88.83 0.14 0.28 550 440 　UPM0J471MPD 470 10× 12.5 0.22 88.83 0.14 0.28 635 505 　UPM0J471MPD6 560 8×15 0.22 105.84 0.12 0.24 595 485 　UPM0J561MPD 560 10× 12.5 0.22 105.84 0.13 0.26 670 545 　UPM0J561MPD6 680 8× 20 0.22 128.52 0.10 0.20 730 605 　UPM0J681MPD 680 10× 16 0.22 128.52 0.11 0.22 825 685 　UPM0J681MPD6 820 8× 20 0.22 154.98 0.085 0.17 795 675 　UPM0J821MPD 820 10×16 0.22 154.98 0.095 0.19 840 715 　UPM0J821MPD6 1000 10× 20 0.22 189 0.075 0.15 950 820 　UPM0J102MPD 1000 12.5× 15 0.22 189 0.085 0.17 890 770 　UPM0J102MHD6 1200 10× 20 0.22 226.8 0.065 0.13 1060 930 　UPM0J122MPD 1200 12.5× 15 0.22 226.8 0.075 0.15 950 835 　UPM0J122MHD6 1500 10× 25 0.22 283.5 0.055 0.11 1260 1130 　UPM0J152MPD 1500 12.5× 15 0.22 283.5 0.065 0.13 1020 915 1800 10× 30.5 0.22 340.2 0.050 0.10 1370 1230 　UPM0J182MPD 　UPM0J152MHD6 1800 16× 15 0.22 340.2 0.055 0.11 1270 1140 　UPM0J182MHD6 2200 10× 30.5 0.24 415.8 0.043 0.086 1470 1320 　UPM0J222MPD 2200 16× 15 0.24 415.8 0.049 0.098 1340 1200 　UPM0J222MHD6 2700 12.5× 25 0.24 510.3 0.038 0.076 1700 1530 　UPM0J272MHD 2700 18×15 0.24 510.3 0.044 0.088 1500 1350 　UPM0J272MHD6 3300 12.5× 25 0.26 623.7 0.034 0.068 1710 1530 　UPM0J332MHD 3300 18×15 0.26 623.7 0.039 0.078 1600 1440 　UPM0J332MHD6 3900 12.5× 30.5 0.26 737.1 0.031 0.062 1980 1780 　UPM0J392MHD 3900 16× 20 0.26 737.1 0.036 0.072 1770 1590 　UPM0J392MHD6 4700 12.5× 35.5 0.28 888.3 0.028 0.056 2230 2000 　UPM0J472MHD 4700 18× 20 0.28 888.3 0.032 0.064 1920 1720 　UPM0J472MHD6 5600 12.5× 40 0.30 1058.4 0.026 0.052 2460 2210 　UPM0J562MHD 5600 18× 20 0.30 1058.4 0.030 0.060 1980 1780 　UPM0J562MHD6 6800 16× 30.5 0.32 1285.2 0.024 0.048 2510 2250 　UPM0J682MHD 6800 18× 25 0.32 1285.2 0.027 0.054 2350 2110 　UPM0J682MHD6 8200 16× 35.5 0.36 1549.8 0.022 0.044 2770 2490 　UPM0J822MHD 18× 30.5 0.36 1549.8 0.025 0.050 2600 2340 　UPM0J822MHD6 10000 8200 16×40 0.40 1890 0.020 0.040 3110 2790 　UPM0J103MHD 10000 18×30.5 0.40 1890 0.023 0.046 2720 2440 　UPM0J103MHD6 12000 18× 35.5 0.44 2268 0.019 0.038 3050 2740 　UPM0J123MHD 15000 18× 40 0.50 2835 0.018 0.036 3300 2970 　UPM0J153MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz 0.19 99 0.16 0.32 460 350 　UPM1A331MPD 8× 15 0.19 117 0.14 0.28 550 430 　UPM1A391MPD 10× 12.5 0.19 117 0.15 0.30 635 490 　UPM1A391MPD6 tan δ 330 8× 11.5 390 390 （ ） Part Number 470 8× 15 0.19 141 0.12 0.24 595 475 　UPM1A471MPD 470 10× 12.5 0.19 141 0.13 0.26 670 535 　UPM1A471MPD6 560 8×20 0.19 168 0.10 0.20 730 595 　UPM1A561MPD 560 10× 16 0.19 168 0.11 0.22 700 570 　UPM1A561MPD6 680 8× 20 0.19 204 0.085 0.17 795 660 　UPM1A681MPD 680 10× 16 0.19 204 0.090 0.18 825 685 　UPM1A681MPD6 820 10×20 0.19 246 0.070 0.14 985 835 　UPM1A821MPD 820 12.5×15 0.19 246 0.080 0.16 920 780 　UPM1A821MHD6 1000 10× 20 0.19 300 0.060 0.12 1060 915 　UPM1A102MPD 1000 12.5× 15 0.19 300 0.065 0.13 1040 900 　UPM1A102MHD6 1200 10× 25 0.19 360 0.050 0.10 1260 1120 　UPM1A122MPD 1200 12.5× 15 0.19 360 0.060 0.12 1060 930 　UPM1A122MHD6 10× 30.5 0.19 450 0.045 0.09 1450 1300 　UPM1A152MPD 1500 16× 15 0.19 450 0.050 0.10 1330 1190 　UPM1A152MHD6 1800 12.5×20 0.19 540 0.039 0.078 1470 1320 　UPM1A182MHD 1800 16× 15 0.19 540 0.044 0.088 1420 1270 　UPM1A182MHD6 2200 12.5× 25 0.21 660 0.034 0.068 1710 1530 　UPM1A222MHD 2200 18× 15 0.21 660 0.039 0.078 1600 1440 　UPM1A222MHD6 2700 12.5× 30.5 0.21 810 0.030 0.060 1980 1780 　UPM1A272MHD 2700 16× 20 0.21 810 0.035 0.070 1740 1560 　UPM1A272MHD6 3300 12.5× 35.5 0.23 990 0.026 0.052 2230 2000 　UPM1A332MHD 3300 16×20 0.23 990 0.031 0.062 1850 1660 　UPM1A332MHD6 3900 12.5× 40 0.23 1170 0.024 0.048 2460 2210 　UPM1A392MHD 3900 18×20 0.23 1170 0.028 0.056 2050 1840 　UPM1A392MHD6 4700 16× 30.5 0.25 1410 0.023 0.046 2420 2170 　UPM1A472MHD 4700 18× 25 0.25 1410 0.026 0.052 2350 2110 　UPM1A472MHD6 5600 16× 35.5 0.27 1680 0.021 0.042 2610 2340 　UPM1A562MHD 5600 18× 25 0.27 1680 0.024 0.048 2440 2190 　UPM1A562MHD6 6800 16× 35.5 0.29 2040 0.020 0.040 2770 2490 　UPM1A682MHD 6800 18× 30.5 0.29 2040 0.022 0.044 2720 2440 　UPM1A682MHD6 8200 16× 40 0.33 2460 0.019 0.038 3110 2790 　UPM1A822MHD 8200 10000 16 （1C） Rated Ripple （mArms） 20℃/ 100kHz Case Size φD×L（mm） 1500 10 （1A） Impedance（Ω） max. Leakage Current （µA） at 20℃ after 1 minute Rated Capacitance （µF） 18×35.5 0.33 2460 0.021 0.042 3050 2740 　UPM1A822MHD6 18× 40 0.37 3000 0.017 0.034 3300 2970 　UPM1A103MHD 220 8× 11.5 0.16 105.6 0.16 0.32 460 335 　UPM1C221MPD 270 8 ×15 0.16 129.6 0.14 0.28 550 410 　UPM1C271MPD 270 10 ×12.5 0.16 129.6 0.14 0.28 635 470 　UPM1C271MPD6 330 8× 15 0.16 158.4 0.12 0.24 595 455 　UPM1C331MPD 330 10×12.5 0.16 158.4 0.12 0.24 670 510 　UPM1C331MPD6 390 8 × 20 0.16 187.2 0.10 0.20 730 570 　UPM1C391MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 16 （1C） 25 （1E） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after 1 minute （ ） Impedance（Ω） max. 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 390 10×16 0.16 187.2 0.10 0.20 730 570 　UPM1C391MPD6 470 8× 20 0.16 225.6 0.090 0.18 770 615 　UPM1C471MPD 470 10× 16 0.16 225.6 0.090 0.18 825 660 　UPM1C471MPD6 560 10× 20 0.16 268.8 0.075 0.15 950 775 　UPM1C561MPD 560 12.5× 15 0.16 268.8 0.080 0.16 920 750 　UPM1C561MHD6 680 10× 20 0.16 326.4 0.065 0.13 1060 880 　UPM1C681MPD 680 12.5× 15 0.16 326.4 0.070 0.14 985 820 　UPM1C681MHD6 820 10× 25 0.16 393.6 0.055 0.11 1260 1070 　UPM1C821MPD 820 12.5× 15 0.16 393.6 0.060 0.12 1060 900 　UPM1C821MHD6 1000 10×30.5 0.16 480 0.047 0.094 1410 1220 　UPM1C102MPD 1000 16× 15 0.16 480 0.055 0.11 1270 1100 　UPM1C102MHD6 1200 12.5× 20 0.16 576 0.041 0.082 1430 1250 　UPM1C122MHD 1200 16× 15 0.16 576 0.046 0.092 1390 1220 　UPM1C122MHD6 1500 12.5× 25 0.16 720 0.036 0.072 1700 1530 　UPM1C152MHD 1500 18× 15 0.16 720 0.041 0.082 1560 1400 　UPM1C152MHD6 1800 12.5× 30.5 0.16 864 0.032 0.064 1880 1690 　UPM1C182MHD 1800 16× 20 0.16 864 0.037 0.074 1700 1530 　UPM1C182MHD6 2200 12.5×30.5 0.18 1056 0.028 0.056 2010 1800 　UPM1C222MHD 2200 16× 20 0.18 1056 0.033 0.066 1800 1620 　UPM1C222MHD6 2700 12.5× 35.5 0.18 1296 0.025 0.050 2230 2000 　UPM1C272MHD 2700 16× 25 0.18 1296 0.030 0.060 2190 1970 　UPM1C272MHD6 3300 12.5× 40 0.20 1584 0.023 0.046 2460 2210 　UPM1C332MHD 3300 18× 20 0.20 1584 0.027 0.054 2090 1880 　UPM1C332MHD6 3900 16×30.5 0.20 1872 0.022 0.044 2510 2250 　UPM1C392MHD 3900 18×25 0.20 1872 0.025 0.050 2350 2110 　UPM1C392MHD6 4700 16× 35.5 0.22 2256 0.020 0.040 2770 2490 　UPM1C472MHD 4700 18× 30.5 0.22 2256 0.023 0.046 2720 2440 　UPM1C472MHD6 5600 16× 40 0.24 2688 0.019 0.038 3110 2790 　UPM1C562MHD 5600 18× 35.5 0.24 2688 0.022 0.044 2620 2350 　UPM1C562MHD6 6800 18× 35.5 0.26 3264 0.018 0.036 3050 2740 　UPM1C682MHD 8200 18× 40 0.30 3936 0.017 0.034 3300 2970 　UPM1C822MHD 　UPM1E151MPD 150 8× 11.5 0.14 112.5 0.16 0.32 460 320 180 8× 15 0.14 135 0.14 0.28 550 390 　UPM1E181MPD 180 10× 12.5 0.14 135 0.15 0.30 635 450 　UPM1E181MPD6 220 8× 15 0.14 165 0.11 0.22 625 455 　UPM1E221MPD 220 10× 12.5 0.14 165 0.13 0.26 670 485 　UPM1E221MPD6 270 8× 20 0.14 202.5 0.095 0.19 750 560 　UPM1E271MPD 270 10× 16 0.14 202.5 0.11 0.22 700 525 　UPM1E271MPD6 330 8× 20 0.14 247.5 0.085 0.17 795 610 　UPM1E331MPD 330 10× 16 0.14 247.5 0.095 0.19 825 630 　UPM1E331MPD6 390 10×20 0.14 292.5 0.070 0.14 985 770 　UPM1E391MPD 390 12.5×15 0.14 292.5 0.080 0.16 920 720 　UPM1E391MHD6 470 10× 20 0.14 352.5 0.065 0.13 1060 845 　UPM1E471MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 35 （1V） tan δ Leakage Current （µA） at 20℃ after 1 minute （ ） Impedance（Ω） max. 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 470 12.5× 15 0.14 352.5 0.070 0.14 985 785 　UPM1E471MHD6 560 10×25 0.14 420 0.055 0.11 1260 1030 　UPM1E561MPD 560 12.5× 15 680 25 （1E） Case Size φD×L（mm） 10× 30.5 0.14 420 0.060 0.12 1060 860 0.14 510 0.046 0.092 1420 1180 　UPM1E561MHD6 　UPM1E681MPD 680 16× 15 0.14 510 0.055 0.11 1270 1050 　UPM1E681MHD6 820 12.5× 20 0.14 615 0.041 0.082 1440 1220 　UPM1E821MHD 820 16× 15 0.14 615 0.049 0.098 1340 1140 　UPM1E821MHD6 1000 12.5× 25 0.14 750 0.036 0.072 1700 1470 　UPM1E102MHD 1000 18× 15 0.14 750 0.043 0.086 1520 1310 　UPM1E102MHD6 1200 12.5× 25 0.14 900 0.032 0.064 1760 1550 　UPM1E122MHD 1200 18× 15 0.14 900 0.039 0.078 1600 1400 　UPM1E122MHD6 1500 12.5× 30.5 0.14 1125 0.029 0.058 1980 1780 　UPM1E152MHD 1500 16×20 0.14 1125 0.034 0.068 1770 1590 　UPM1E152MHD6 1800 12.5× 35.5 0.14 1350 0.026 0.052 2230 2000 　UPM1E182MHD 1800 16×25 0.14 1350 0.031 0.062 2190 1970 　UPM1E182MHD6 2200 12.5× 40 0.16 1650 0.024 0.048 2460 2210 　UPM1E222MHD 2200 18× 20 0.16 1650 0.028 0.056 2050 1840 　UPM1E222MHD6 2700 16× 30.5 0.16 2025 0.022 0.044 2510 2250 　UPM1E272MHD 2700 18× 25 0.16 2025 0.025 0.050 2350 2110 　UPM1E272MHD6 3300 16× 35.5 0.18 2475 0.020 0.040 2770 2490 　UPM1E332MHD 3300 18× 30.5 0.18 2475 0.023 0.046 2720 2440 　UPM1E332MHD6 3900 16× 40 0.18 2925 0.019 0.038 3110 2790 　UPM1E392MHD 3900 18× 35.5 0.18 2925 0.021 0.042 3050 2740 　UPM1E392MHD6 4700 18×40 0.20 3525 0.018 0.036 3300 2970 　UPM1E472MHD 100 8× 11.5 0.12 105 0.16 0.32 460 305 　UPM1V101MPD 120 8× 15 0.12 126 0.14 0.28 550 370 　UPM1V121MPD 120 10× 12.5 0.12 126 0.15 0.30 635 425 　UPM1V121MPD6 150 8× 15 0.12 157.5 0.12 0.24 595 415 　UPM1V151MPD 150 10× 12.5 0.12 157.5 0.12 0.24 680 475 　UPM1V151MPD6 180 8× 20 0.12 189 0.10 0.20 730 520 　UPM1V181MPD 180 10×16 0.12 189 0.11 0.22 700 500 　UPM1V181MPD6 220 8× 20 0.12 231 0.085 0.17 795 580 　UPM1V221MPD 220 10× 16 0.12 231 0.090 0.18 825 600 　UPM1V221MPD6 270 10 × 20 0.12 283.5 0.070 0.14 985 735 　UPM1V271MPD 270 12.5× 15 0.12 283.5 0.080 0.16 920 690 　UPM1V271MHD6 330 10× 20 0.12 346.5 0.060 0.12 1060 810 　UPM1V331MPD 330 12.5×15 0.12 346.5 0.065 0.13 1020 780 　UPM1V331MHD6 390 10× 25 0.12 409.5 0.055 0.11 1260 980 　UPM1V391MPD 390 12.5× 15 0.12 409.5 0.060 0.12 1060 825 　UPM1V391MHD6 470 10×30.5 0.12 493.5 0.046 0.092 1450 1160 　UPM1V471MPD 470 16× 15 0.12 493.5 0.055 0.11 1270 1010 　UPM1V471MHD6 560 12.5×20 0.12 588 0.041 0.082 1430 1170 　UPM1V561MHD 560 16×15 0.12 588 0.048 0.096 1360 1110 　UPM1V561MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 680 35 （1V） 50 （1H） Case Size φD×L（mm） tan δ 12.5× 25 0.12 Leakage Current （µA） at 20℃ after 1 minute Impedance（Ω） max. Rated Ripple （mArms） 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz 714 0.036 0.072 1700 1410 （ ） Part Number 　UPM1V681MHD 680 18×15 0.12 714 0.042 0.084 1540 1280 　UPM1V681MHD6 820 12.5× 25 0.12 861 0.032 0.064 1760 1490 　UPM1V821MHD 820 18× 15 0.12 861 0.038 0.076 1620 1380 　UPM1V821MHD6 1000 12.5× 30.5 0.12 1050 0.029 0.058 1980 1710 　UPM1V102MHD 1000 16× 20 0.12 1050 0.034 0.068 1770 1530 　UPM1V102MHD6 1200 12.5× 35.5 0.12 1260 0.026 0.052 2230 1960 　UPM1V122MHD 1200 16× 25 0.12 1260 0.031 0.062 2190 1920 　UPM1V122MHD6 1500 12.5×40 0.12 1575 0.024 0.048 2460 2210 　UPM1V152MHD 1500 18× 20 0.12 1575 0.028 0.056 2050 1840 　UPM1V152MHD6 1800 16× 30.5 0.12 1890 0.022 0.044 2510 2250 　UPM1V182MHD 1800 18× 25 0.12 1890 0.025 0.050 2350 2110 　UPM1V182MHD6 2200 16× 35.5 0.14 2310 0.020 0.040 2770 2490 　UPM1V222MHD 2200 18× 30.5 0.14 2310 0.023 0.046 2720 2440 　UPM1V222MHD6 2700 16× 40 0.14 2835 0.018 0.036 3110 2790 　UPM1V272MHD 2700 18× 35.5 0.14 2835 0.021 0.042 3050 2740 　UPM1V272MHD6 3300 18× 40 0.16 3465 0.017 0.034 3300 2970 　UPM1V332MHD 68 8×11.5 0.10 102 0.20 0.40 415 260 　UPM1H680MPD 82 8×15 0.10 123 0.17 0.34 505 320 　UPM1H820MPD 82 10×12.5 0.10 123 0.18 0.36 530 340 　UPM1H820MPD6 100 8× 20 0.10 150 0.14 0.28 620 410 　UPM1H101MPD 100 10× 16 0.10 150 0.16 0.32 580 385 　UPM1H101MPD6 120 8× 20 0.10 180 0.12 0.24 755 510 　UPM1H121MPD 120 10× 16 0.10 180 0.13 0.26 755 510 　UPM1H121MPD6 150 10×20 0.10 225 0.10 0.20 820 570 　UPM1H151MPD 150 12.5× 15 0.10 225 0.11 0.22 785 545 　UPM1H151MHD6 180 10×20 0.10 270 0.085 0.17 945 670 　UPM1H181MPD 180 12.5× 15 0.10 270 0.095 0.19 845 605 　UPM1H181MHD6 220 10× 25 0.10 330 0.075 0.15 1150 840 　UPM1H221MPD 220 12.5× 15 0.10 330 0.080 0.16 920 670 　UPM1H221MHD6 270 10× 30.5 0.10 405 0.065 0.13 1200 900 　UPM1H271MPD 270 16× 15 0.10 405 0.070 0.14 1120 840 　UPM1H271MHD6 330 10× 30.5 0.10 495 0.055 0.11 1300 995 　UPM1H331MPD 330 16 × 15 0.10 495 0.060 0.12 1210 925 　UPM1H331MHD6 390 12.5×25 0.10 585 0.048 0.096 1440 1120 　UPM1H391MHD 390 16× 15 0.10 585 0.055 0.11 1270 990 　UPM1H391MHD6 470 12.5× 25 0.10 705 0.044 0.088 1500 1200 　UPM1H471MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 50 （1H） 63 （1J） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after 1 minute （ ） Impedance（Ω） max. Rated Ripple （mArms） 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 470 18× 15 0.10 705 0.046 0.092 1470 1170 　UPM1H471MHD6 560 12.5× 30.5 0.10 840 0.040 0.080 1720 1410 　UPM1H561MHD 560 16× 20 0.10 840 0.044 0.088 1550 1270 　UPM1H561MHD6 680 12.5× 35.5 0.10 1020 0.036 0.072 1900 1580 　UPM1H681MHD 680 16× 20 0.10 1020 0.040 0.080 1630 1350 　UPM1H681MHD6 820 12.5× 40 0.10 1230 0.033 0.066 2120 1800 　UPM1H821MHD 820 18× 20 0.10 1230 0.036 0.072 1810 1540 　UPM1H821MHD6 1000 16×30.5 0.10 1500 0.030 0.060 2150 1860 　UPM1H102MHD 1000 18× 25 0.10 1500 0.033 0.066 2020 1750 　UPM1H102MHD6 1200 16× 35.5 0.10 1800 0.028 0.056 2320 2040 　UPM1H122MHD 1200 18× 30.5 0.10 1800 0.031 0.062 2140 1880 　UPM1H122MHD6 1500 16× 40 0.10 2250 0.026 0.052 2650 2380 　UPM1H152MHD 1500 18× 30.5 0.10 2250 0.029 0.058 2340 2100 　UPM1H152MHD6 1800 18× 35.5 0.10 2700 0.025 0.050 2620 2350 　UPM1H182MHD 2200 18×40 0.12 3300 0.024 0.048 2790 2510 　UPM1H222MHD 47 8× 11.5 0.08 88.83 0.25 0.50 365 215 　UPM1J470MPD 56 8× 15 0.08 105.84 0.21 0.42 450 275 　UPM1J560MPD 56 10× 12.5 0.08 105.84 0.23 0.46 450 275 　UPM1J560MPD6 68 8× 15 0.08 128.52 0.17 0.34 500 315 　UPM1J680MPD 68 10×12.5 0.08 128.52 0.19 0.38 495 310 　UPM1J680MPD6 82 8× 20 0.08 154.98 0.15 0.30 600 385 　UPM1J820MPD 82 10× 16 0.08 154.98 0.16 0.32 580 375 　UPM1J820MPD6 100 10× 20 0.08 189 0.12 0.24 750 495 　UPM1J101MPD 100 12.5× 15 0.08 189 0.14 0.28 695 460 　UPM1J101MHD6 120 10× 20 0.08 226.8 0.10 0.20 820 555 　UPM1J121MPD 120 12.5× 15 0.08 226.8 0.12 0.24 750 510 　UPM1J121MHD6 150 10× 25 0.08 283.5 0.090 0.18 950 665 　UPM1J151MPD 150 12.5×15 0.08 283.5 0.095 0.19 845 590 　UPM1J151MHD6 10× 30.5 0.08 340.2 0.075 0.15 1110 790 　UPM1J181MPD 180 16× 15 0.08 340.2 0.080 0.16 1050 750 　UPM1J181MHD6 220 12.5× 20 0.08 415.8 0.065 0.13 1140 835 　UPM1J221MHD 220 16× 15 0.08 415.8 0.070 0.14 1120 820 　UPM1J221MHD6 270 12.5× 25 0.08 510.3 0.055 0.11 1340 1000 　UPM1J271MHD 270 18×15 0.08 510.3 0.060 0.12 1290 965 　UPM1J271MHD6 330 12.5× 25 0.08 623.7 0.049 0.098 1420 1090 　UPM1J331MHD 　UPM1J331MHD6 180 330 18× 15 0.08 623.7 0.050 0.10 1410 1080 390 12.5×30.5 0.08 737.1 0.043 0.086 1620 1260 　UPM1J391MHD 390 16×20 0.08 737.1 0.047 0.094 1500 1170 　UPM1J391MHD6 470 12.5×35.5 0.08 888.3 0.039 0.078 1780 1420 　UPM1J471MHD 470 16× 25 0.08 888.3 0.042 0.084 1700 1360 　UPM1J471MHD6 560 12.5× 40 0.08 1058.4 0.035 0.070 1950 1590 　UPM1J561MHD 560 18×20 0.08 1058.4 0.039 0.078 1730 1410 　UPM1J561MHD6 680 16×30.5 0.08 1285.2 0.032 0.064 2050 1700 　UPM1J681MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 63 （1J） Rated Capacitance （µF） tan δ Leakage Current （µA） at 20℃ after 1 minute （ ） Impedance（Ω） max. Rated Ripple （mArms） 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 680 18× 25 0.08 1285.2 0.035 0.070 1940 1610 　UPM1J681MHD6 820 16× 35.5 0.08 1549.8 0.029 0.058 2220 1890 　UPM1J821MHD 820 18× 30.5 0.08 1549.8 0.032 0.064 2110 1790 　UPM1J821MHD6 1000 16×40 0.08 1890 0.027 0.054 2370 2050 　UPM1J102MHD 1000 18× 35.5 0.08 1890 0.029 0.058 2280 1970 　UPM1J102MHD6 1200 18× 40 0.08 2268 33 80 （1K） Case Size φD×L（mm） 8× 11.5 0.025 0.050 2510 2210 　UPM1J122MHD 0.08 79.2 0.53 1.40 275 150 　UPM1K330MPD 39 8× 15 0.08 93.6 0.46 1.20 300 170 　UPM1K390MPD 39 10× 12.5 0.08 93.6 0.49 1.30 380 215 　UPM1K390MPD6 47 8× 15 0.08 112.8 0.39 1.10 360 215 　UPM1K470MPD 47 10× 12.5 0.08 112.8 0.42 1.10 410 245 　UPM1K470MPD6 56 8× 20 0.08 134.4 0.34 0.92 490 295 　UPM1K560MPD 56 10× 16 0.08 134.4 0.36 0.97 500 305 　UPM1K560MPD6 68 10× 20 0.08 163.2 0.28 0.76 570 355 　UPM1K680MPD 68 12.5×15 0.08 163.2 0.31 0.84 520 325 　UPM1K680MHD6 82 10× 20 0.08 196.8 0.25 0.68 620 395 　UPM1K820MPD 82 12.5×15 0.08 196.8 0.27 0.73 560 355 　UPM1K820MHD6 100 10× 25 0.08 240 0.21 0.57 795 525 　UPM1K101MPD 100 12.5× 15 0.08 240 0.23 0.62 605 400 　UPM1K101MHD6 120 10× 30.5 0.08 288 0.18 0.49 870 585 　UPM1K121MPD 120 16× 15 0.08 288 0.20 0.54 663 445 　UPM1K121MHD6 150 10× 30.5 0.08 360 0.15 0.41 955 665 　UPM1K151MPD 150 16× 15 0.08 360 0.18 0.47 699 470 　UPM1K151MHD6 180 12.5×25 0.08 432 0.13 0.35 1040 735 　UPM1K181MHD 180 16× 15 0.08 432 0.15 0.41 766 545 　UPM1K181MHD6 220 12.5×30.5 0.08 528 0.12 0.32 1160 845 　UPM1K221MHD 220 18× 15 0.08 528 0.13 0.35 881 645 　UPM1K221MHD6 270 12.5× 30.5 0.08 648 0.10 0.27 1270 945 　UPM1K271MHD 270 16× 20 0.08 648 0.11 0.30 1240 920 　UPM1K271MHD6 330 12.5× 35.5 0.08 792 0.088 0.24 1450 1100 　UPM1K331MHD 330 16× 25 0.08 792 0.099 0.27 1440 1100 　UPM1K331MHD6 390 12.5× 40 0.08 936 0.078 0.21 1610 1250 　UPM1K391MHD 390 18× 20 0.08 936 0.089 0.24 1450 1120 　UPM1K391MHD6 470 16 × 30.5 0.08 1128 0.069 0.19 1790 1430 　UPM1K471MHD 470 18× 25 0.08 1128 0.080 0.22 1650 1320 　UPM1K471MHD6 560 16×35.5 0.08 1344 0.062 0.17 2000 1640 　UPM1K561MHD 560 18×30.5 0.08 1344 0.072 0.19 1750 1430 　UPM1K561MHD6 680 16× 40 0.08 1632 0.055 0.15 2200 1830 　UPM1K681MHD 680 18× 30.5 0.08 1632 0.065 0.18 1850 1540 　UPM1K681MHD6 820 18× 35.5 0.08 1968 0.049 0.13 2250 1910 　UPM1K821MHD 18×40 0.08 2400 0.044 0.12 2370 2050 　UPM1K102MHD 1000 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） Rated Ripple （mArms） 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz 0.08 66 0.55 1.50 275 145 　UPM2A220MPD 8× 15 0.08 81 0.47 1.30 300 160 　UPM2A270MPD 10×12.5 0.08 81 0.50 1.40 380 205 　UPM2A270MPD6 8× 15 0.08 99 0.38 1.00 360 200 　UPM2A330MPD 10×12.5 0.08 99 0.42 1.10 410 230 　UPM2A330MPD6 8× 20 0.08 117 0.33 0.89 490 280 　UPM2A390MPD 10×16 0.08 117 0.36 0.97 500 285 　UPM2A390MPD6 10×20 0.08 141 0.28 0.76 570 340 　UPM2A470MPD 12.5×15 0.08 141 0.31 0.84 520 310 　UPM2A470MHD6 10×20 0.08 168 0.24 0.65 620 375 　UPM2A560MPD 56 12.5×15 0.08 168 0.27 0.73 560 340 　UPM2A560MHD6 68 10×25 0.08 204 0.21 0.57 795 500 　UPM2A680MPD 68 12.5×15 0.08 204 0.23 0.62 605 380 　UPM2A680MHD6 0.08 246 0.18 0.49 870 555 　UPM2A820MPD Case Size φD×L（mm） tan δ 22 8× 11.5 27 27 33 33 39 39 47 47 56 82 82 100 100 （2A） Impedance（Ω） max. Leakage Current （µA） at 20℃ after 1 minute Rated Capacitance （µF） 10×30.5 （ ） Part Number 16×15 0.08 246 0.19 0.51 681 435 　UPM2A820MHD6 10× 30.5 0.08 300 0.15 0.41 955 635 　UPM2A101MPD 100 16× 15 0.08 300 0.17 0.46 719 475 　UPM2A101MHD6 120 12.5× 25 0.08 360 0.13 0.35 1040 700 　UPM2A121MHD 120 16× 15 0.08 360 0.14 0.38 793 535 　UPM2A121MHD6 150 12.5× 25 0.08 450 0.11 0.30 1120 780 　UPM2A151MHD 150 18× 15 0.08 450 0.12 0.32 917 640 　UPM2A151MHD6 180 12.5×30.5 0.08 540 0.098 0.26 1270 900 　UPM2A181MHD 180 16× 20 0.08 540 0.11 0.30 1240 880 　UPM2A181MHD6 220 12.5× 35.5 0.08 660 0.087 0.23 1450 1050 　UPM2A221MHD 220 16× 25 0.08 660 0.093 0.25 1440 1050 　UPM2A221MHD6 270 12.5× 40 0.08 810 0.072 0.19 1610 1200 　UPM2A271MHD 270 18× 20 0.08 810 0.080 0.22 1450 1080 　UPM2A271MHD6 330 16× 30.5 0.08 990 0.062 0.17 1790 1370 　UPM2A331MHD 330 18× 25 0.08 990 0.070 0.19 1650 1260 　UPM2A331MHD6 390 16× 35.5 0.08 1170 0.053 0.14 2000 1550 　UPM2A391MHD 390 18× 30.5 0.08 1170 0.062 0.17 1850 1430 　UPM2A391MHD6 470 16×40 0.08 1410 0.047 0.13 2200 1760 　UPM2A471MHD 470 18× 35.5 0.08 1410 0.056 0.15 1970 1570 　UPM2A471MHD6 560 18× 35.5 0.08 1680 0.041 0.11 2250 1840 　UPM2A561MHD 680 18× 40 0.08 2040 0.036 0.097 2300 1910 　UPM2A681MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100M