AT094

Series DS Toggles Tilt Switch Rockers Distinctive Characteristics Pushbuttons DSA Programmable Illuminated PB Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when tilted beyond ±10° of the horizontal. Rotaries Keylocks PCB adaptor available as an accessory. DSB Actual Sizes Totally sealed body allows process compatibility for timeand money-saving automatic soldering and cleaning. K Tilt Sealed construction for protection from environmental elements, including hydrogen sulfide, sulfur dioxide, and nitrogen hydroxide. Terminals are made of ammonia-resistant materials. Tactiles Slides Photo interrupter, rather than contacts, ensures high reliability. 1 million operations minimum. Touch Space-saving compact dimensions allow high density mounting. Internal steel ball movement allows functionality of 360° circumference rotation. DSA Indicators The DSB series switch is well-suited to meet product safety concerns due to normally closed (on) status. Accessories Crimped terminals ensure secure mounting and prevent dislodging during wave soldering. Supplement The switch is triggered when tilted beyond ±30° of the horizontal. DSB www.nkkswitches.com K3 1/11/18 Toggles Series DS Tilt Switch Rockers DSA SWITCH PART NUMBER & DESCRIPTION Pushbuttons SPST ON – OFF Sealed Body Programmable Illuminated PB DSA01 DSA SWITCH SPECIFICATIONS Mechanical & Electrical Specifications Poles and Circuits: Single Pole Single Throw ON – OFF Operating Range: ON Angle = 10° ~ 170°; OFF Angle = 190° ~ 350° Keylocks Resistive Load: Contact Resistance: Insulation Resistance: 100 milliohms maximum 50 megohms minimum @ 250V DC 250V AC for 1 minute minimum between terminals Mechanical Life: 100,000 operations minimum Electrical Life: 100,000 operations minimum Slides Rotaries Dielectric Strength: 0.1A @ 12V DC Materials & Finishes PBT Rubber Rings: Silicone Rubber Contact Balls: Brass with Silver Plating Terminals: Brass with Silver Plating Environmental Specifications K Operating Temperature Range: –10°C ~ +70°C (+14°F ~ +158°F) Storage Temperature Range: –25°C ~ +85°C (–13°F ~ +185°F) Contact Bounce (for reference): Touch Tilt Tactiles Housing: Humidity: Indicators Vibration (for reference): Notes: 500ms maximum 90% humidity for 96 hours @ 40°C (104°F) Frequency range 10Hz ~ 500Hz for 2 hours; 2 directions; Acceleration: 0.2G 1. Do not install switch near vibration source. 2. Terminals should not be exposed to liquid. Accessories Processing for AT094 PCB Adaptor Supplement Soldering (with PCB Mount Holder): Automated Cleaning: K4 Wave Soldering: See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Hand clean locally using alcohol based solution. www.nkkswitches.com Series DS Toggles Tilt Switch DSA SWITCH SPECIFICATIONS (CONTINUED) Rockers θ 10˚ 10˚ 10˚ 10˚ Pushbuttons 90˚ Unstable 180˚ Connection Programmable Illuminated PB Unstable Connection 0˚ Cross Section UP ON 160˚ 270˚ 160˚ OFF DOWN Allow 500ms settling time between states. TYPICAL SWITCH DIMENSIONS 1 2 (29.3) 1.154 (11.5) Dia .453 Rotaries (1.0) .039 (1.0) .039 (4.9) Dia .193 Keylocks Part No. This End (7.4) Dia .291 Terminal numbers are not on the switch. DSA01 Tactiles Slides OPTIONAL ADAPTOR AT094 Materials: PCB Adaptor for DSA01 Holder: Polypropylene Spring: Spring Steel with Nickel Plating PC Pins: Brass with Nickel Plating K (13.0) .512 Touch Assembled DSA Switch & Adaptor Tilt Operating Range + (11.89) .468 (29.97) 1.180 Accessories (12.7) .500 (1.02) Dia Typ .040 (29.97) 1.180 Supplement (34.93) 1.375 Indicators (0.78) Dia Typ .031 PCB Footprint www.nkkswitches.com K5 Toggles Series DS Tilt Switch Pushbuttons Rockers DSB SWITCH PART NUMBERS & DESCRIPTION ON-OFF Status ON-OFF Status Straight PC Terminals Right Angle PC Terminals DSBA1P DSBA1H Programmable Illuminated PB DSB SWITCH SPECIFICATIONS Absolute Maximum Ratings Temperature at 25°C Keylocks Input Slides Rotaries Output Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 5 Power Dissipation PD 75 mW Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 3 V Collector Current IC 20 mA Collector Power Dissipation PC 50 mW Total Power Dissipation Ptot 100 mW V Mechanical Specifications Tactiles Mechanical Life: Electrical Life: 1,000,000 operations minimum 1,000,000 operations minimum using applicable circuit Tilt Materials & Finishes K Housing: Glass fiber reinforced polyamide (UL94V-0 flammability rating) Base: Glass fiber reinforced polyamide (UL94V-0 flammability rating) Touch Terminals: Phosphor bronze with tin plating Supplement Accessories Indicators Environmental Specifications K6 Operating Temperature Range: –25°C ~ +80°C (–13°F ~ +176°F) Storage Temperature Range: –30°C ~ +85°C (–22°F ~ +185°F) Humidity: 85% humidity for 500 hours @ +85°C (+185°F) Vibration: 10Hz with peak-to-peak amplitude of 10mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 500,000 cycles Shock: 100G (981m/s2 ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Notes: 1. Prevent exposure to magnetic fields. 2. Do not install switch near vibration source. www.nkkswitches.com Series DS Toggles Tilt Switch DSB SWITCH SPECIFICATIONS (CONTINUED) Return Angle ±30° to ±60° Minimum 10° Output VOL VOH Output VOH Pushbuttons Circuit Characteristics (ON-OFF) Operating Angle Rockers Operating Characteristics VOL Programmable Illuminated PB Output Characteristics VOL with Photo transistor ON: 1.0V maximum (horizontal) Output Characteristics VOH with Photo transistor OFF: 4.0V minimum (inclined at an angle of –60° minimum) Output Characteristics Reference Point gle O u tp u t Characteristics L – Moving Point An gle O u tp u +D eg ree t Characteristics L Return Angle An g Moving Point Moving Point Slides pu t C h a r a c t e ri st ics Right Angle PC Tactiles Straight PC H ut ics Circuit Design Considerations VCC VCC = 5V R1 1 ANODE VCC Vo R2 = 100kΩ I F = 19mA (VCC = 5V, R1 = 200Ω) IF 3 COLLECTOR Touch Maximum = 1.3V 2 CATHODE 4 EMITTER Indicators VF of the LED K R2 PCB Processing Automated Cleaning: Wave Soldering: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Accessories Soldering : Tilt t C h a r a c t e ri st Use alcohol based solution at 50°C maximum. Do not submerge over 2.0” (5.0cm) for 1 minute maximum. Do not use organic solvents. www.nkkswitches.com Supplement pu O O ut H Rotaries Moving Point ee gr De le Return Angle +D eg re eA ng Keylocks An le – ee gr De Reference Point K7 Series DS Toggles Tilt Switch Pushbuttons Rockers MOUNTING OPTIONS PCB PCB Programmable Illuminated PB PCB mounting option for Straight PC PCB mounting option for Right Angle PC Install switch at an angle less than ±3° from the mounting surface. TYPICAL SWITCH DIMENSIONS Keylocks Straight PC (0.4) Typ .016 Rotaries (3.5) .138 3 (9.0) Dia .354 (10.0) .394 2 Cathode 3 Collector 2 (11.9) .469 (11.9) .469 4 1 1 Anode Slides (0.4) .016 4 Emitter (0.9) .035 (3.1) .122 (8.8) .346 (3.1) .122 Terminal numbers are on bottom of switch. DSBA1P Right Angle PC K (8.8) .346 (7.7) .303 Touch Tilt Tactiles (9.5) .374 (1.3) Dia Typ .051 (5.1) .201 (5.1) .201 (9.0) Dia .354 (0.4) .016 1 3 Indicators 2 4 2 Cathode (9.5) .374 1 Anode (5.1) .201 4 Emitter Accessories 3 Collector Supplement (10.0) .394 (11.9) .469 K8 DSBA1H (3.5) .138 (0.4) .016 (3.1) .122 (1.5) .059 (0.9) Typ .035 (5.1) .201 (11.9) .469 Terminal numbers are on bottom of switch. www.nkkswitches.com (3.1) .122 (11.9) .469 (1.3) DiaTyp .051