JWL11RA2A/UCV-WL

Series JW High Inrush 16 Amp Rocker with Wire Leads JWL11RA2A/UCV-WL Dimensions in mm/inch (7.0) .276 Part No. (4.5) .177 Shrink Tubing Red Red (24.4) .961 (28.0) 1.102 26° Black (2.0) .079 (23.0) .906 1b 2 1 COM COM (24.0) .945 (19.05) .750 (7.5) .295 (20.0) .787 (304.8) 12.00 (9.8) Typ .386 Black 1a 2a (20.2) .795 (17.6) .693 2b (32.0) 1.260 (20.5) .807 SINGLE POLE WITH SOLDER LUG Rocker Position Connected Terminals Base Switch Pole Down Center Up Down Center Up JWL11RA2A/UCV SP ON NONE OFF 1-1b OPEN OPEN Throw & Schematics Note: Terminal numbers are actually on the switch. Actuator position oriented with switch part number facing front. 1 (COM) SPST 1b Wiring No. of Wires Terminal 1b 2 Red Wire Specifications Terminal Terminal COMMON 1a, 2a, COM, 2b Black --- 600V Temperature Range: –40°C ~ +105°C (–40°F ~ +221°F) 14 AWG Stripped Wire Ends 1/4” UL1015 Panel Cutout Panel Thickness Range: (29.5) 1.161 .039” ~ .157” (1.0mm ~ 4.0mm) Base Switch Specifications (20.5) .807 Electrical Capacity (Resistive Load) Other Ratings Power Level: 16A @ 125/250V AC; 5A @ 72V DC for telecommunication applications Contact Resistance: 20 milliohms maximum Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 2,000V AC minimum between contacts for 1 minute minimum; 4,000V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 25,000 operations minimum Electrical Life: 25,000 operations minimum Nominal Operating Force: 5.00N Angle of Throw: 26° Materials & Finishes Rocker: Polyphenylene ether (UL94V-0) Contacts: Silver alloy plus copper with silver plating Housing/Frame & Barrier: Polyamide (UL94V-0) Case/Base: Melamine (UL94V-0) Interior Seal: Polyphenylene sulfide (UL94V-0) Terminals: Brass with silver plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Sealing: –25°C through +70°C (–13°F through +158°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Dust resistant inner seal Flammability Standards: TV Ratings for UL & CSA: UL: CSA: VDE: UL94V-0 for rocker, housing, seal & case/base TV-8 - Overload Test @120V AC for 50 operations: Steady State Current (rms) 12A; Minimum Inrush Current (peak) 163A. Endurance Test @ 120V AC for 25,000 operations: Steady State Current (rms) 8A; Minimum Inrush Current (peak) 117A. File No. E44145. Recognized at 16A @ 250V AC; 5A @ 72V DC. File No. 023535_0_000. Certified at 16A @ 250V AC. License No. 115674. Approved at steady state inrush 128A, resistive 16A, & motor load 8A all at 250V AC. Standards & Certifications for Base Switch www.nkkswitches.com 03/01/18