M2B25BA5G40-B

Process Sealed Miniature Pushbuttons Series M2 Distinctive Characteristics Snap-acting contact mechanism gives short travel, sensitive actuation, light touch, smooth feel, audible feedback, and a longer electrical life. Single unit construction of the bushing and top of the housing gives protection from cleaning fluids or other liquids. O-ring surrounding actuator at top of bushing interior prevents liquids from reaching switch mechanism. Ultrasonic welding of upper and lower housing seals out contaminants and allows automated soldering and cleaning. Terminals are epoxy sealed to prevent entry of flux, solvents, and other contaminants. Bracketed models have crimped bracket legs to ensure secure PC mounting and prevent dislodging during automated soldering. Logic level and power capabilities are available to suit varying applications. Actual Size N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Miniature Pushbuttons Series M2 General Specifications Electrical Capacity (Resistive Load) Power Level (code W): Logic Level (code G): Logic/Power Level (code A): 1A @ 125V AC or 1A @ 30V DC 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Combines W & G ratings Note: Find additional explanation of dual rating & operating range in Supplement section. 20 milliohms maximum for silver; 30 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 200,000 operations minimum 25,000 operations minimum for silver; 100,000 operations minimum for gold Single pole 2.94N & double pole 4.90N Nonshorting (break-before-make) Pretravel .023” (0.6mm); Overtravel .016” (0.4mm); Total Travel .039” (1.0mm) Brass with nickel plating Brass with tin plating Glass fiber reinforced polyamide (UL94V-0) Nitrile butadiene rubber Glass fiber reinforced polyamide (UL94V-0) Silver alloy with silver plating (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Silver alloy with silver plating (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Brass with silver or gold plating –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) 49.0N (11.0 lbf) for plunger A & 79.4N (17.9 lbf) for plunger B Wave Soldering Recommended: See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. UL94V-0 rated bushing/housing & base All models recognized at 1A @ 125V AC, 1A @ 30V DC, or 0.4A @ 28V DC; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch; C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch. All models certified at 1A @ 125V AC, 1A @ 30V DC, or 0.4A @ 28V DC; CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: Materials & Finishes Plunger: Support Bracket: Bushing/Housing: Sealing Ring: Base: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Cap Installation Force: Soldering: Cleaning: PCB Processing Standards & Certifications Flammability Standards: UL & C-UL Recognized: R CSA Certified: N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Miniature Pushbuttons T YPICAL SWITCH ORDERING EXAMPLE Series M2 F C M2B 15 A A5 G 30 POLES & CIRCUITS 15 25 SPDT DPDT ON ON (ON) (ON) CONTACT MATERIALS & R ATINGS W Silver; Rated 1A @ 125V AC & 1A @ 30V DC Gold; Rated 0.4VA maximum @ 28V AC/DC maximum Gold over Silver; Rated 1A @ 125V AC & 0.4VA max @ 28V AC/DC max F H B C SNAP-ON CAPS For Plunger A .201” (5.1mm) Diameter .295” (7.5mm) Diameter For Plunger B .315” (8.0mm) Diameter .394” (10.0mm) Diameter ( ) = Momentary G P LUNGERS A B .282” (7.16mm) Long for cap codes F & H .307” (7.8mm) Long for cap codes B & C A CAP COLORS A Black White Red Yellow Green Blue Gray PC TERMINALS BUSHING A5 .250” (6.35mm) Double Flatted 03 13 30 40 Straight Straight with .460” (11.7mm) Bracket .150” (3.81mm) Right Angle .150” (3.81mm) Vertical B C *E *F *G *H IMPORTANT: Switches are supplied without UL, C-UL, & CSA markings unless specified. Specific models & ratings noted on General Specifications page. * For cap codes B & C only DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2B15AA5G30-FC .250” (6.35mm) Bushing with Double Flat SPDT ON-(ON) Circuit Right Angle PC Terminals Red .201” (5.1mm) Diameter Cap on .282” (7.16mm) Long Plunger Gold Contacts with 0.4VA Rating N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Miniature Pushbuttons POLES & CIRCUITS Plunger Position ( ) = Momentary Normal Pole SP Model M2B15 ON (ON) 1-3 1-2 SPDT Down Connected Terminals Normal Down Note: Series M2 Throw & Schematics Terminal numbers are not actually on the switch. 1 (COM) 3 1 (COM) 3 2 6 2 4 5 DP M2B25 ON (ON) 1-3 4-6 1-2 4-5 DPDT PLUNGERS A .282” (7.16mm) Long (2.84) Dia .112 (3.0) Dia .118 B .307” (7.8mm) Long (3.0) Dia .118 (7.8) .307 For cap codes F & H Material: Chrome over brass (7.16) .282 For cap codes B & C Material: Chrome over brass BUSHING A5 .250” (6.35mm) Double Flatted (6.8) .268 (5.2) .205 (6.2) .244 (6.35) .250 CONTACT MATERIALS & RATINGS W G Silver over Silver Power Level 1A @ 125V AC & 1A @ 30V DC Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Complete explanation of operating range in Supplement section. A Gold over Silver Power Level or Logic Level 1A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Miniature Pushbuttons PC TERMINALS 03 Straight Epoxy Seal (4.8) (5.9) .189 .232 (1.17) .046 Thk = (0.8) .031 Series M2 13 Straight with .460” (11.7mm) Bracket (11.7) .460 (5.9) .232 30 .150” (3.81mm) Right Angle 40 .150” (3.81mm) Vertical (3.81) .150 (3.81) .150 SNAP-ON CAPS For Plunger Type A F AT475 .201” (5.1mm) Diameter (5.1) Dia .201 H (8.05) .317 AT496 .295” (7.5mm) Diameter (7.5) Dia .295 Material: Polyamide Colors Available: A, B, C (4.0) .157 Material: Polyamide Colors Available: A, B, C (8.05) .317 (4.0) .157 For Plunger Type B B AT443 .315” (8.0mm) Diameter (8.0) Dia .315 C (7.6) .299 AT442 .394” (10.0mm) Diameter (10.0) Dia .394 (9.0) .354 (8.0) .315 Material: Polycarbonate Colors Available: A, B, C, E, F, G, H (8.8) .346 Material: Polycarbonate Colors Available: A, B, C, E, F, G, H Cap Colors Codes: A Black B White C Red E Yellow F Green G Blue H Gray N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Miniature Pushbuttons T YPICAL SWITCH DIMENSIONS Straight PC Single Pole Series M2 (5.1) Dia .201 (4.0) .157 (6.2) .244 NKK P/N This Side (4.7) Typ .185 NC NO 3 2 3 (12.7) .500 2 1 (4.7) Typ .185 (1.8) Dia Typ .073 (2.84) Dia .112 (7.16) .282 (8.05) .317 (6.35) .250 (9.3) .366 (21.6) .850 (4.8) .189 (0.8) Typ .031 COM 1 (5.2) .205 (1.17) .046 (6.6) .260 M2B15AA5G03-FC Straight PC Double Pole (5.1) Dia .201 (4.0) .157 (6.2) .244 NKK P/N This Side (4.7) Typ .185 NC 6 NO 5 (4.8) .189 3 2 (12.7) .500 3 2 1 (4.8) .189 6 5 4 (2.84) Dia .112 (7.16) .282 (8.05) .317 (6.35) .250 (9.3) .366 (21.6) .850 (4.8) .189 (0.8) Typ .031 (4.7) Typ .185 COM 4 1 (1.17) Typ .046 (11.5) .453 (5.2) .205 (1.8) Dia Typ .073 M2B25AA5G03-FC Straight PC • Bracket Single & Double Pole (2.84) Dia .112 (8.05) .317 (5.8) .228 NKK P/N This Side (4.0) .157 (5.1) Dia .201 (6.2) .244 (1.6) Typ .063 3 2 1 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (11.7) Typ .460 (4.8) .189 (4.7) Typ .185 3 2 1 1 2 3 (0.5) Typ .020 (0.8) Typ .031 (4.7) Typ .185 (1.6) Typ .063 (2.4) Typ .095 6 5 4 (1.17) Typ .046 (1.17) Typ .046 (15.75) .620 (8.0) .315 (11.5) .453 (4.8) .189 (3.2) Typ .126 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 C L M2B15AA5G13-FC N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Miniature Pushbuttons T YPICAL SWITCH DIMENSIONS Right Angle PC NKK P/N This Side (5.2) .205 (2.84) Dia .112 (5.1) Dia .201 Series M2 Single Pole (4.0) .157 (4.7) Typ .185 COM 1 NO 2 NC 3 3 2 1 (6.6) .260 (3.2) .126 (12.7) .500 (2.54) Typ .100 (1.8) Dia Typ .073 (1.3) Typ .051 (5.08) .200 (7.16) .282 (8.05) .317 (6.15) .242 (0.4) .016 (12.7) .500 (1.27) .050 (4.7) Typ .185 (12.7) .500 (0.8) Typ .031 M2B15AA5G30-FC Right Angle PC NKK P/N This Side (5.1) Dia .201 (4.0) .157 Double Pole (4.7) Typ .185 (3.81) .150 (12.7) .500 (2.54) Typ .100 (1.8) Dia Typ .073 COM 4 NO 5 NC 6 6 5 2 4 1 (5.2) .205 (2.84) Dia .112 (1.3) Typ .051 (5.08) .200 (7.16) .282 (8.05) .317 (0.4) .016 (12.7) .500 (0.5) .020 (1.27) Typ .050 (3.81) .150 (4.7) Typ .185 (12.7) .500 1 2 3 (11.5) .453 (3.7) .146 (0.8) Typ .031 3 (6.15) .242 M2B25AA5G30-FC Vertical PC (7.2) .283 (5.1) Dia .201 (4.0) .157 Single Pole (6.2) .244 NKK P/N This Side 3 2 NC 3 2 (3.81) Typ .150 (2.84) Dia .112 (1.3) Typ .051 (5.08) .200 (7.16) .282 (8.05) .317 (0.4) .016 (12.7) .500 (1.0) .039 (0.5) .020 (0.8) Typ .031 (3.81) Typ .150 NO (12.7) .500 (4.2) .165 1 COM 1 (12.7) .500 (2.54) Typ .100 (1.8) Dia Typ .073 (6.15) .242 (1.27) .050 (6.6) .260 M2B15AA5G40-FC Vertical PC (5.2) .205 (4.0) .157 Double Pole NKK P/N This Side (4.8) .189 NC 6 3 2 (5.1) Dia .201 (6.2) .244 3 2 6 5 4 (2.4) Typ .094 (3.81) Typ .150 (1.0) .039 (2.84) Dia .112 (1.3) Typ .051 (5.08) .200 (7.16) .282 (8.05) .317 (0.4) .016 (12.7) .500 (0.5) .020 (0.8) Typ .031 (3.81) Typ .150 NO 5 (12.7) .500 (4.2) .165 1 COM 4 1 (12.7) .500 (2.54) Typ .100 (1.8) Dia Typ .073 (6.15) .242 (1.27) Typ .050 (11.5) .453 M2B25AA5G40-FC N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07