S6AW-WL

Series S Medium Capacity Standard Size Toggle with Wire Leads S6AW-WL Red Shrink Tubing (17.0) Dia .669 Green Flat Green Red 6 3 5 2 4 1 (31.2) 1.228 Black (10.9) .429 Blue (5.7) Dia .224 Blue White Yellow M12 P1 White Yellow (7.5) .295 (18.6) .732 Black (17.5) .689 (19.05) .750 (12.5) .492 (20.0) .787 Dimensions in mm/inch (304.8) 12.00 DOUBLE POLE SOLDER LUG WITH PANEL SEAL Electrical Capacity Toggle Position/Connected Terminals Base Switch Pole & Throw S6AW DPDT Down Center Up Resistive Flat ON Throw & Schematics: 2-3 5-6 NONE ON 2 5 (COM) 2-1 5-4 1 6 AC 125V AC 250V DC 30V (11.1) .437 20A 10A 20A (12.5) Dia .492 Note: Terminal numbers are actually on the switch. DPDT 3 Panel Cutout 4 Wiring Wire Specifications No. of Wires Terminal 1 Terminal 2 Terminal 3 Terminal 4 Terminal 5 Terminal 6 UL1015 600V Temperature Range: –40°C ~ +105°C (–40°F ~ +221°F) 6 White Black Red Yellow Blue Green 14 AWG Stripped Wire Ends 1/4” Maximum Panel Thickness: .158” (4.0mm) Standard Hardware AT503M Hex Face Nut AT537 O-ring AT508 Lockwasher Base Switch Specifications Electrical Capacity (Resistive & Inductive Load) Power Level: 20A @ 125V AC or10A @ 250V AC or 20A @ 30V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw: 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 25,000 operations minimum 22° Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Brass with chrome plating Brass with chrome plating Phenolic resin Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating Environmental Data Operating Temperature Range: –30°C ~ +70°C (–22°F ~ +158°F) Sealing: Splashproof panel seal model meets IP67 standard Installation Mounting Torque: 1.47Nm (13 lb•in) www.nkkswitches.com 03/01/18