54ACTQ541

MICROCIRCUIT DATA SHEET MV54ACTQ541-X REV 0A0 Original Creation Date: 02/04/99 Last Update Date: 05/27/99 Last Major Revision Date: 02/04/99 Octal Buffer/Line Driver with TRI-STATE Outputs General Description The ACTQ541 is an octal buffer/line driver designed to be employed as a memory and address driver, clock driver and bus oriented transmitter/receiver. This device is similar in function to the ACTQ244 while providing flow-through architecture (inputs on opposite side from outputs). This pinout arrangement makes this device especially useful as an output port for microprocessors, allowing ease of layout and greater PC board density. The ACTQ541 utilizes NSC's FACT TM Quiet Series technology to guarantee quiet output switching the improved dynamic threshold performance. FACT Quiet series features GTO output control and undershoot corrector in addition to split ground bus for superior performance. Industry Part Number 54ACTQ541 NS Part Numbers 54ACTQ541E-QMLV* 54ACTQ541J-QMLV** 54ACTQ541W-QMLV*** Prime Die D541 Controlling Document 5962-96829 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C Quality Conformance Inspection MIL-STD-883, Method 5005 1 MV54ACTQ541-X REV 0A0 MICROCIRCUIT DATA SHEET Features Guaranteed simultaneous switching noise level and dynamic threshold performance Guaranteed pin-to-pin skew AC performance Inputs and outputs on opposite sides of package for easy board layout Non-inverting TRI-STATE outputs Guaranteed 4 kV minimum ESD immunity TTL compatible inputs Outputs source/sink 24 mA Standard Military Drawing (SMD) - ACTQ541: 5962-9682901V2A*, VRA**, VSA*** 2 MV54ACTQ541-X REV 0A0 MICROCIRCUIT DATA SHEET (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Vi = Vi = DC Input Diode Current (Iik) -0.5V Vcc +0.5V Voltage (Vi) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Voltage (Vo) DC Output Source or Sink Current (Io) +50 mA DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA Storage Temperature (Tstg) -65 C to +150 C DC Latch-Up Source or Sink Current +300 mA Junction Temperature (Tj) 175 C Thermal Resistance, junction-to-case (jc) see Mil-Std 1835 Maximum Power Dissipation (pd) 500 mW Lead Temperature soldering, 10 seconds Note 1: +300 C -20 mA +20 mA -0.5V to Vcc +0.5V Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Minimum Input Edge Rate Delta V/Delta T ACTQ Devices Vin from 0.8V to 2.0V Vc @ 4.5V, 5.5V Operating Temperature (ta) Maximum High Level Output Current (Ioh) -24 mA Maximum Low Level Output Current (Iol) +24 mA 125 mV/ns -55 C to +125 C 3 MV54ACTQ541-X REV 0A0 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL IIH PARAMETER High Level input Current Low Level input Current Low level output voltage CONDITIONS VCC=5.5V, VIH=5.5V NOTES PINNAME MIN MAX 0.1 1.0 -0.1 -1.0 .36 .50 .10 .36 .50 .10 1.65 3.86 3.70 4.40 4.86 4.70 5.40 3.85 100 80 100 80 100 80 100 80 UNIT uA uA uA uA V V V V V V V V V V V V V V nA uA nA uA nA uA nA uA SUBGROUPS 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 1 2, 3 1, 2, 3 1, 2, 3 1 2, 3 1, 2, 3 1 2, 3 1, 2, 3 1, 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2 INPUT 1, 2 INPUT IIL VCC=5.5V, VIL=0.0V 1, 2 INPUT 1, 2 INPUT VOL VCC=4.5V, VIL=0.8V, IOL=24.0mA, VIH=2.0V VCC=4.5V, VIL=0.8V, IOL=50.0uA, VIH=2.0V VCC=5.5V, VIL=0.8V, IOL=24.0mA, VIH=2.0V VCC=5.5V, VIL=0.8V, IOL=50.0uA, VIH=2.0V 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, OUTPUT 2, 5 1, 2 OUTPUT 1, 2 OUTPUT VIOL VOH Dynamic Output Current LOW High Level Output Voltage VCC=5.5V, VIH=5.5V, VIL=0.0V, IOL=50.0mA VCC=4.5V, VIL=0.8V, IOH=-24.0mA, VIH=2.0V VCC=4.5V, VIL=0.8V, IOH=-50.0uA, VIH=2.0V VCC=5.5V, VIL=0.8V, IOH=-24.0mA, VIH=2.0V VCC=5.5V, VIL=0.8V, IOH=-50.0uA, VIH=2.0V 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, OUTPUT 2, 5 1, 2 VCC 1, 2 VCC VIOH ICCH Dynamic Output Current HIGH Supply Current VCC=5.5V, VIH=5.5V, VIL=0.0V, IOH=-50.0mA VCC=5.5V, VINH=5.5V, VINL=0.0V ICCL Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 1, 2 VCC ICCZ Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 1, 2 VCC ICCF Supply Current Functional VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 1, 2 VCC 4 MV54ACTQ541-X REV 0A0 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL ICCT PARAMETER Supply Current per Input Maximum TRI-STATE Leakage Current CONDITIONS VCC=5.5V, VIHT=3.4V, VINH=5.5V, VINL=0.0V VCC=4.5V, VM=4.5V, VIH=2.0V, VINH=4.5V, VINL=0.0V VCC=5.5V, VM=5.5V, VIH=2.0V, VINH=5.5V, VINL=0.0V IOZL Maximum TRI-STATE Leakage Current VCC=4.5V, VM=0.0V, VIH=2.0V, VINH=4.5V, VINL=0.0V VCC=5.5V, VM=0.0V, VIH=2.0V, VINH=5.5V, VINL=0.0V VIKL VIKH VILD Negative Input Clamp Voltage Positive Input Clamp Voltage Maximum Low Level Dynamic Input Voltage Minimum High Level Dynamic Input Voltage Quiet Output Maximum Dynamic Vol Quiet Output Minimum Dynamic Vol VCC=4.5V, IKL=-18mA VCC=4.5V, IKH=18mA VCC=5.0V, LOAD 50pF / 500 OHMS NOTES PINNAME MIN MAX 1.0 1.6 0.25 5.0 0.25 5.0 -0.25 -5.0 -0.25 -5.0 -1.2 5.7 0.8 UNIT mA mA uA uA uA uA uA uA uA uA V V V SUBGROUPS 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 1, 2, 3 4 1, 2 VCC 1, 2 VCC IOZH 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 OUTPUT 1, 2 INPUT 1, 2 INPUT 6, 9 INPUT VIHD VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT 2.2 V 4 VOLP VCC=5.0V, LOAD 50pF / 500 OHMS 6, 8 OUTPUT 1.5 V 4 VOLV VCC=5.0V, LOAD 50pF / 500 OHMS 6, 8 OUTPUT -1.2 V 4 5 MV54ACTQ541-X REV 0A0 MICROCIRCUIT DATA SHEET Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR & TF=3.0ns, Temp range: -55C to +125C. SYMBOL tpLH PARAMETER Propagation Delay VCC=4.5V CONDITIONS NOTES PINNAME MIN 2.0 2.0 2.0 2.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 MAX 8.0 9.0 8.0 9.0 8.0 9.5 10.0 11.5 8.0 9.5 8.0 9.5 UNIT ns ns ns ns ns ns ns ns ns ns ns ns SUBGROUPS 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 3, Dn to 4, 7 On 3, Dn to 4, 7 On tpHL Propagation Delay VCC=4.5V 3, Dn to 4, 7 On 3, Dn to 4, 7 On tpZH Output Enable Time VCC=4.5V 3, OE to 4, 7 On 3, OE to 4, 7 On tpZL Output Enable Time VCC=4.5V 3, OE to 4, 7 On 3, OE to 4, 7 On tpHZ Output Disable Time VCC=4.5V 3, OE to 4, 7 On 3, OE to 4, 7 On tpLZ Output Disable Time VCC=4.5V 3, OE to 4, 7 On 3, OE to 4, 7 On Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: Note 8: Note 9: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C & -55C TEMPERATURE, SUBGROUPS A1, 2, 3, 7, & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C, -55C TEMPERATURE, SUBGROUPS A9, 10 & 11. TRANSMISSION LINE DRIVING TEST, GUARDBANDED LIMITS SET FOR +25C, 2 MSEC DURATION MAX. GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA) MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MINIMUM LIMITS. MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @ VOL. MAX NUMBER OF DATA INPUTS (N) SWITCHING. (N-1) INPUTS SWITCHING 0V TO 3V. INPUT-UNDER-TEST SWITCHING 3V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ= 1 MHZ. 6 MV54ACTQ541-X REV 0A0 MICROCIRCUIT DATA SHEET Revision History Rev 0A0 ECN # Rel Date Originator Steve Lombard Changes Initial MDS Release M0003441 05/27/99 7