LM219J

LM119/LM219/LM319 High Speed Dual Comparator May 1999 LM119/LM219/LM319 High Speed Dual Comparator General Description The LM119 series are precision high speed dual comparators fabricated on a single monolithic chip. They are designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Further, they have higher gain and lower input currents than devices like the LM710. The uncommitted collector of the output stage makes the LM119 compatible with RTL, DTL and TTL as well as capable of driving lamps and relays at currents up to 25 mA. The LM319A offers improved precision over the standard LM319, with tighter tolerances on offset voltage, offset current, and voltage gain. n Operates from a single 5V supply n Typically 80 ns response time at ± 15V n Minimum fan-out of 2 each side n Maximum input current of 1 µA over temperature n Inputs and outputs can be isolated from system ground n High common mode slew rate Although designed primarily for applications requiring operation from digital logic supplies, the LM119 series are fully specified for power supplies up to ± 15V. It features faster response than the LM111 at the expense of higher power dissipation. However, the high speed, wide operating voltage range and low package count make the LM119 much more versatile than older devices like the LM711. The LM119 is specified from −55˚C to +125˚C, the LM219 is specified from −25˚C to +85˚C, and the LM319A and LM319 are specified from 0˚C to +70˚C. Features n Two independent comparators Connection Diagram Dual-In-Line Package DS005705-4 Note 1: Also available per SMD# 8601401 or JM38510/10306 Top View Order Number LM119J, LM119J/883 (Note 1), LM219J, LM319J, LM319AM, LM319M, LM319AN or LM319N See NS Package Number J14A, M14A or N14A © 1999 National Semiconductor Corporation DS005705 www.national.com Absolute Maximum Ratings (Note 8) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Total Supply Voltage Output to Negative Supply Voltage Ground to Negative Supply Voltage Ground to Positive Supply Voltage Differential Input Voltage Input Voltage (Note 2) ESD rating (1.5 kΩ in series with 100 pF) Power Dissipation (Note 3) Output Short Circuit Duration Storage Temperature Range 36V 36V 25V 18V ± 5V ± 15V 800V 500 mW 10 sec −65˚C to 150˚C Lead Temperature (Soldering, 10 sec.) 260˚C Soldering Information Dual-In-Line Package Soldering (10 seconds) 260˚C Small Outline Package Vapor Phase (60 seconds) 215˚C Infrared (15 seconds) 220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices. Operating Temperature Range LM119 LM219 −55˚C to 125˚C −25˚C to 85˚C Electrical Characteristics (Note 4) Parameter Input Offset Voltage (Note 5) Input Offset Current (Note 5) Input Bias Current Voltage Gain Response Time (Note 6) Saturation Voltage Output Leakage Current Input Offset Voltage (Note 5) Input Offset Current (Note 5) Input Bias Current Input Voltage Range Saturation Voltage VS = ± 15V V+ = 5V, V− = 0 V+ ≥ 4.5V, V− = 0 VIN ≤ −6 mV, ISINK ≤ 3.2 mA TA ≥ 0˚C TA ≤ 0˚C Output Leakage Current Differential Input Voltage Positive Supply Current Positive Supply Current Negative Supply Current TA = 25˚C, V+ = 5V, V− = 0 TA = 25˚C, VS = ± 15V TA = 25˚C, VS = ± 15V 4.3 8 3 11.5 4.5 VIN ≥ 5 mV, VOUT = 35V, V− = VGND = 0V 1 0.23 0.4 0.6 10 V V µA V mA mA mA −12 1 Conditions Min TA = 25˚C, RS ≤ 5k TA = 25˚C TA = 25˚C TA = 25˚C (Note 7) TA = 25˚C, VS = ± 15V VIN ≤ −5 mV, IOUT = 25 mA TA = 25˚C VIN ≥ 5 mV, VOUT = 35V TA = 25˚C RS ≤ 5k 10 LM119/LM219 Typ 0.7 30 150 40 80 0.75 0.2 1.5 2 7 100 1000 Max 4.0 75 500 mV nA nA V/mV ns V µA mV nA nA V V Units ± 13 +12 3 ±5 Note 2: For supply voltages less than ± 15V the absolute maximum input voltage is equal to the supply voltage. Note 3: The maximum junction temperature of the LM119 is 150˚C, while that of the LM219 is 110˚C. For operating at elevated temperatures, devices in the H10 package must be derated based on a thermal resistance of 160˚C/W, junction to ambient, or 19˚C/W, junction to case. The thermal resistance of the J14 and N14 packages is 100˚C/W, junction to ambient. Note 4: These specifications apply for VS = ± 15V, and the Ground pin at ground, and −55˚C ≤ TA ≤ +125˚C, unless otherwise stated. With the LM219, however, all temperature specifications are limited to −25˚C ≤ TA ≤ +85˚C. The offset voltage, offset current and bias current specifications apply for any supply voltage from a single 5V supply up to ± 15V supplies. Do not operate the device with more than 16V from ground to VS. Note 5: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply with a 1 mA load. Thus, these parameters define an error band and take into account the worst case effects of voltage gain and input impedance. Note 6: The response time specified (see definitions) is for a 100 mV input step with 5 mV overdrive. Note 7: Output is pulled up to 15V through a 1.4 kΩ resistor. Note 8: Refer to RETS119X for LM119H/883 and LM119J/883 specifications. www.national.com 2 Absolute Maximum Ratings LM319A/319 (Note 8) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Total Supply Voltage Output to Negative Supply Voltage Ground to Negative Supply Voltage Ground to Positive Supply Voltage Differential Input Voltage Input Voltage (Note 9) Power Dissipation (Note 10) Output Short Circuit Duration ESD rating (1.5 kΩ in series with 100 pF) 36V 36V 25V 18V ± 5V ± 15V 500 mW 10 sec 800V Storage Temperature Range −65˚C to 150˚C Lead Temperature (Soldering, 10 sec.) 260˚C Soldering Information Dual-In-Line Package Soldering (10 sec.) 260˚C Small Outline Package Vapor Phase (60 sec.) 215˚C Infrared (15 sec.) 220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices. Operating Temperature Range LM319A, LM319 0˚C to 70˚C Electrical Characteristics (Note 11) Parameter Input Offset Voltage (Note 12) Input Offset Current (Note 12) Input Bias Current Voltage Gain Response Time (Note 13) Saturation Voltage Output Leakage Current Input Offset Voltage (Note 12) Input Offset Current (Note 12) Input Bias Current Input Voltage Range Saturation Voltage Differential Input Voltage Positive Supply Current Positive Supply Current Negative Supply Current TA = 25˚C, V+ = 5V, V− = 0 TA = 25˚C, VS = ± 15V TA = 25˚C, VS = ± 15V 4.3 8 3 12.5 5 VS = ± 15V V+ = 5V, V− = 0 V+ ≥ 4.5V, V− = 0 VIN ≤ −10 mV, ISINK ≤ 3.2 mA Conditions Min TA = 25˚C, RS ≤ 5k TA = 25˚C TA = 25˚C TA = 25˚C (Note 14) TA = 25˚C, VS = ± 15V VIN ≤ −10 mV, IOUT = 25 mA TA = 25˚C VIN ≥ 10 mV, VOUT = 35V, V− = VGND = 0V, TA = 25˚C RS ≤ 5k LM319A Typ 0.5 20 150 20 40 80 0.75 0.2 1.5 10 10 300 1000 Max 1.0 40 500 8 Min LM319 Typ 2.0 80 250 40 80 0.75 0.2 1.5 10 10 300 1200 Max 8.0 200 1000 mV nA nA V/mV ns V µA mV nA nA V 3 0.3 0.4 V V V mA 12.5 5 mA mA Units ± 13 1 0.3 3 0.4 1 ± 13 ±5 4.3 8 3 ±5 Note 9: For supply voltages less than ± 15 the absolute maximum input voltage is equal to the supply voltage. Note 10: The maximum junction temperature of the LM319A and LM319 is 85˚C. For operating at elevated temperatures, devices in the H10 package must be derated based on a thermal resistance of 160˚C/W, junction to ambient, or 19˚C/W, junction to case. The thermal resistance of the N14 and J14 package is 100˚C/W, junction to ambient. The thermal resistance of the M14 package is 115˚C/W, junction to ambient. Note 11: These specifications apply for VS = ± 15V, and 0˚C ≤ TA ≤ 70˚C, unless otherwise stated. The offset voltage, offset current and bias current specifications apply for any supply voltage from a single 5V supply up to ± 15V supplies. Do not operate the device with more than 16V from ground to VS. Note 12: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply with a 1 mA load. Thus, these parameters define an error band and take into account the worst case effects of voltage gain and input impedance. Note 13: The response time specified is for a 100 mV input step with 5 mV overdrive. Note 14: Output is pulled up to 15V through a 1.4 kΩ resistor. 3 www.national.com Typical Performance Characteristics Input Currents LM119A/LM119/LM219 Transfer Function Common Mode Limits DS005705-10 DS005705-11 DS005705-12 Response Time for Various Input Overdrives Response Time for Various Input Overdrives Input Characteristics DS005705-15 DS005705-13 DS005705-14 Response Time for Various Input Overdrives Response Time for Various Input Overdrives Output Saturation Voltage DS005705-18 DS005705-16 DS005705-17 www.national.com 4 Typical Performance Characteristics Supply Current Supply Current LM119A/LM119/LM219 (Continued) Output Limiting Characteristics DS005705-19 DS005705-20 DS005705-21 Typical Performance Characteristics Input Currents Supply Currents LM319A, LM319 Transfer Function DS005705-22 DS005705-23 DS005705-24 Response Time for Various Input Overdrives Response Time for Various Input Overdrives Input Characteristics DS005705-25 DS005705-26 DS005705-27 5 www.national.com Typical Performance Characteristics Response Time for Various Input Overdrives LM319A, LM319 (Continued) Response Time for Various Input Overdrives Output Saturation Voltage DS005705-30 DS005705-28 DS005705-29 Supply Current Common Mode Limits Output Limiting Characteristics DS005705-31 DS005705-32 DS005705-33 www.national.com 6 Schematic Diagram 7 DS005705-1 *Do not operate the LM119 with more than 16V between GND and V+ www.national.com Typical Applications (Note 15) Relay Driver Window Detector DS005705-5 Note 15: Pin numbers are for metal can package. DS005705-6 VOUT = 5V for VLT ≤ VIN ≤ VUT VOUT = 0 for VIN ≤ VLTor VIN ≥ VUT Connection Diagrams Metal Can Package DS005705-9 Order Number LM119W/883 See NS Package Number W10A DS005705-7 Case is connected to pin 5 (V−) Top View Order Number LM119H, LM119H/883 (Note 1), or LM319H See NS Package Number H10C www.national.com 8 Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) Order Number LM119H, LM119H/883, LM319AH or LM319H NS Package Number H10C Cavity Dual-In-Line Package (J) Order Number LM119J, LM119J/883, LM219J, LM319AJ or LM319J NS Package Number J14A 9 www.national.com Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Dual-In-Line Package (M) Order Number LM319AM or LM319M NS Package Number M14A Molded Dual-In-Line Package (N) Order Number LM319AN or LM319N NS Package Number N14A www.national.com 10 LM119/LM219/LM319 High Speed Dual Comparator Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Order Number LM119W/883, LM119WG/883 NS Package Number W10A, WG10A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.